The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Vibration energy harvesting in automotive suspension system: A detailed review
Open accessAbstract
Abstract Hydraulic shock absorbers have come into widespread use in vehicle suspensions since decades ago to effectively reduce the acceleration of vehicle bodies and maintain good contact between tires and ground under road irregularities. Although energy efficiency has been a major concern in the automotive industry since the mass production in the 1900s, researchers realized that the energy dissipated in traditional hydraulic shock absorbers is worthy of being recovered only in the middle of 1990s. Since then, many different types of energy harvesting based shock absorbers were conceptualized and prototyped. Unlike traditional suspension systems which suppress the vibrations by dissipating the vibration energy into waste heat, the regenerative suspension with energy harvesting shock absorbers can convert the traditionally wasted energy into electricity. This paper is a comprehensive review on energy harvesting based vehicle suspensions. Specifically, it focuses on an analytical and statistical study of the vehicle regenerative suspensions and reviewing the concepts, designs, simulations, test rig experiments and vehicle road tests. The most common energy harvesting systems in vehicle suspensions are compared in terms of advantages and limitations. In addition, the challenging issues and research gaps that remain unresolved are addressed and some recommendations regarding such challenges are stated for further research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
Applied Mechanics and Materials
(2026) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm · Cited by 2,575
Energy Harvesting Technologies
(2009) · Springer eBooks · doi:10.1007/978-0-387-76464-1 · Cited by 1,910
Global energy consumption due to friction in passenger cars
Holmberg, K., Andersson, P., & Erdemir, A. (2012) · Tribology International · doi:10.1016/j.triboint.2011.11.022 · Cited by 1,614
A review of energy sources and energy management system in electric vehicles
Tie, S. F., & Tan, C. W. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.077 · Cited by 1,463
DeVierno, A., Thorn, B. K., & Carrano, A. L. (2013) · DigitalCommons - Fairfield (Fairfield University) · Cited by 1,457
A comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Fontaras, G., Zacharof, N.-G., & Ciuffo, B. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.12.004 · Cited by 686
Wang, H., Jasim, A., & Chen, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.125 · Cited by 494
Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles
Bradley, T. H., & Frank, A. A. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.05.003 · Cited by 471
Investigations of a nonlinear energy harvester with a bistable potential well
Mann, B. P., & Owens, B. A. (2010) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.11.034 · Cited by 398
Electromagnetic Energy-Harvesting Shock Absorbers: Design, Modeling, and Road Tests
Li, Z., Zuo, L., Luhrs, G., Lin, L., & Qin, Y.-X. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2229308 · Cited by 368
Self-citationDesign and characterization of an electromagnetic energy harvester for vehicle suspensions
Zuo, L., Scully, B., Shestani, J., & Zhou, Y. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/4/045003 · Cited by 367
Self-citationA sustainability assessment of electric vehicles as a personal mobility system
Faria, R., Moura, P., Delgado, J., & de Almeida, A. T. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.02.023 · Cited by 327
Large-scale vibration energy harvesting
Zuo, L., & Tang, X. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13486707 · Cited by 285
Self-citationHu, Y., Xu, C., Zhang, Y., Lin, L., Snyder, R. L., & Wang, Z. L. (2011) · Advanced Materials · doi:10.1002/adma.201102067 · Cited by 275
Active and Semi-Active Vibration Isolation
Karnopp, D. (1995) · Journal of Vibration and Acoustics · doi:10.1115/1.2838660 · Cited by 268
Zhang, Z., Zhang, X., Chen, W., Rasim, Y., Salman, W., Pan, H., Yuan, Y., & Wang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.054 · Cited by 267
Energy-harvesting shock absorber with a mechanical motion rectifier
Li, Z., Zuo, L., Kuang, J., & Luhrs, G. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/025008 · Cited by 253
Self-citationZhang, X., Zhang, Z., Pan, H., Salman, W., Yuan, Y., & Liu, Y. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.012 · Cited by 226
Self-citationLinear electromagnetic devices for vibration damping and energy harvesting: Modeling and testing
Zhu, S., Shen, W.-A., & Xu, Y.-L. (2012) · Engineering Structures · doi:10.1016/j.engstruct.2011.09.024 · Cited by 220
Energy harvesting from a vehicle suspension system
Xie, X. D., & Wang, Q. (2015) · Energy · doi:10.1016/j.energy.2015.04.009 · Cited by 219
Design and Optimization of a Tubular Linear Electromagnetic Vibration Energy Harvester
Tang, X., Lin, T., & Zuo, L. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2249666 · Cited by 189
Self-citationPiezoelectric energy harvesting
Howells, C. A. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.02.020 · Cited by 188
Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives
Ali, M. K. A., Fuming, P., Younus, H. A., et al. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.11.013 · Cited by 181
Self-citationGao, M., Wang, Y., Wang, P., & Wang, P. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.170 · Cited by 181
Lee, J., & Choi, B. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.09.054 · Cited by 170
Impact-based piezoelectric vibration energy harvester
Ju, S., & Ji, C.-H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.076 · Cited by 166
Lin, T., Pan, Y., Chen, S., & Zuo, L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.032 · Cited by 142
Self-citationEnergy Harvesting Systems: Principles, Modeling and Applications
Kamierski, T. J., & Beeby, S. (2010) · Springer eBooks · Cited by 137
A New Hybrid Suspension System with Active Control and Energy Regeneration
Yoshihiro, S. U. D. A., & SHIIBA, T. (1996) · Vehicle System Dynamics · doi:10.1080/00423119608969226 · Cited by 130
Piezoelectric polymer-based roadway energy harvesting via displacement amplification module
Shin, Y.-H., Jung, I., Noh, M.-S., Kim, J. H., Choi, J.-Y., Kim, S., & Kang, C.-Y. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.074 · Cited by 126
Zhang, Y., Chen, H., Guo, K., Zhang, X., & Li, S. E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.085 · Cited by 120
Cassidy, I. L., Scruggs, J. T., Behrens, S., & Gavin, H. P. (2011) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x11421824 · Cited by 119
Design, simulation and experiment of a novel high efficiency energy harvesting paver
Liu, M., Lin, R., Zhou, S., Yu, Y., Ishida, A., McGrath, M., Kennedy, B., Hajj, M., & Zuo, L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.123 · Cited by 118
Self-citationA renewable energy harvesting system using a mechanical vibration rectifier (MVR) for railroads
Zhang, X., Pan, H., Qi, L., Zhang, Z., Yuan, Y., & Liu, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.064 · Cited by 118
Self-citationSingh, K. B., Bedekar, V. N., Taheri, S., & Priya, S. (2012) · Mechatronics · doi:10.1016/j.mechatronics.2012.06.006 · Cited by 112
Xie, L., Li, J., Li, X., et al. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.07.005 · Cited by 108
Askari, H., Asadi, E., Saadatnia, Z., Khajepour, A., Khamesee, M. B., & Zu, J. W.-Z. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.12.024 · Cited by 103
Zhang, Z., Zhang, X., Rasim, Y., Wang, C., Du, B., & Yuan, Y. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.11.096 · Cited by 97
Itani, K., Bernardinis, A. D., Khatir, Z., & Jammal, A. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.04.036 · Cited by 95
Cao, S., & Li, J. (2017) · Advances in Mechanical Engineering · doi:10.1177/1687814017696210 · Cited by 90
Design of a hydraulic servo-actuation fed by a regenerative braking system
Pugi, L., Pagliai, M., Nocentini, A., Lutzemberger, G., & Pretto, A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.047 · Cited by 86
Guo, S., Liu, Y., Xu, L., Guo, X., & Zuo, L. (2016) · Vehicle System Dynamics · doi:10.1080/00423114.2016.1174276 · Cited by 75
Self-citationA mathematical model for piezoelectric ring energy harvesting technology from vehicle tires
Xie, X., & Wang, Q. (2015) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2015.05.004 · Cited by 73
Waste Energy Harvesting: Mechanical and Thermal Energies
Bing, K. L., Tao, L., Hng, H. H., et al. (2014) · Medical Entomology and Zoology · Cited by 64
Vibration energy harvesting with a nonlinear structure
Liu, C., & Jing, X. (2016) · Nonlinear Dynamics · doi:10.1007/s11071-016-2630-7 · Cited by 61
A review on energy harvesting from ocean waves by piezoelectric technology
Viet, N. V., Wu, N., & Wang, Q. (2017) · Journal of Modeling in Mechanics and Materials · doi:10.1515/jmmm-2016-0161 · Cited by 54
Vibrational energy harvesting by exploring structural benefits and nonlinear characteristics
Wei, C., & Jing, X. (2017) · Communications in Nonlinear Science and Numerical Simulation · doi:10.1016/j.cnsns.2016.12.026 · Cited by 53
Zou, J., Guo, X., Xu, L., Tan, G., Zhang, C., & Zhang, J. (2017) · Shock and Vibration · doi:10.1155/2017/3186584 · Cited by 49
Self-citationFabrication and testing of an energy-harvesting hydraulic damper
Li, C., & Tse, P. W.-T. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/6/065024 · Cited by 44
The Variable Linear Transmission for Regenerative Damping in Vehicle Suspension Control
Fodor, M., & Redfield, R. C. (1993) · Vehicle System Dynamics · doi:10.1080/00423119308969018 · Cited by 44
Temperature dependence of a magnetically levitated electromagnetic vibration energy harvester
Pancharoen, K., Zhu, D., & Beeby, S. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.01.011 · Cited by 42
From functional analysis to energy harvesting system design: application to car suspension
Lafarge, B., Cagin, S., Curea, O., & Hacala-Perret, A. (2015) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-015-0284-1 · Cited by 37
Energy harvesting from suspension systems using regenerative force actuators
Khoshnoud, F., Sundar, D. B., Badi, M., Chen, Y., Calay, R. K., & de Silva, C. W. (2013) · International Journal of Vehicle Noise and Vibration · doi:10.1504/ijvnv.2013.055804 · Cited by 29
Design and Motion Modeling of an Electromagnetic Hydraulic Power Hump Harvester
Obeid, H. H., Jaleel, A. K., & Hassan, N. A. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/150293 · Cited by 25
Cooley, C. G. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.02.038 · Cited by 19
Cited by
A comprehensive review on the state-of-the-art of piezoelectric energy harvesting
Sezer, N., & Koç, M. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105567 · Cited by 1,480
Liu, H., Fu, H., Sun, L., Lee, C., & Yeatman, E. M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110473 · Cited by 405
Mechanical modulations for enhancing energy harvesting: Principles, methods and applications
Zou, H.-X., Zhao, L.-C., Gao, Q.-H., Zuo, L., Liu, F.-R., Tan, T., Wei, K.-X., & Zhang, W.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113871 · Cited by 377
Self-citationRotational energy harvesting for self-powered sensing
Fu, H., Mei, X., Yurchenko, D., Zhou, S., Theodossiades, S., Nakano, K., & Yeatman, E. M. (2021) · Joule · doi:10.1016/j.joule.2021.03.006 · Cited by 337
Metadata
- Authors
- Abdelkareem, M. A. A., Xu, L., Ali, M. K. A., Elagouz, A., Mi, J., Guo, S., Liu, Y., & Zuo, L.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 229
- Pages
- 672-699
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2886398577
- Cited by
- 441
- References
- 59
- FWCI
- 27.50
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.