Advanced thermal systems driven by paraffin-based phase change materials – A review
The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Abstract
Abstract Advanced thermal systems designed and fabricated through paraffinic phase change materials have emerged quite fast until recently. However, most of the prior works have reviewed the fabrication strategies to tailor the poor thermal characteristics of paraffin waxes, as well as compiled the application-oriented studies related to thermal/cold storage, thermal management of batteries, photovoltaics, buildings, and so forth. In the present review, the advanced thermal systems, manipulated through multifunctional inherent traits of paraffin waxes, have been reviewed and systematically categorized into thermo-management, thermo-mechanical, thermo-responsive and thermo-chemical systems. In addition, guided by the previously reported results for paraffinic thermal composites, it is hereby recommended to urgently promote the synergistic tradeoff between thermal conductivity improvement and latent heat reduction so as to avoid the thermo-physical bottlenecks and the design challenges in the future. Additional attempts include proposals of an ideal phase change diagram, serving as a guide to understand the phase change theory henceforth, and a categorical flow chart of thermal reinforcements leading to fundamental principles to fabricate an ideal thermal composite. In all, the effort is mainly dedicated to bridge the gap between broad fields where paraffin waxes have been, directly or indirectly, deployed. Therefore, fundamental terminologies are necessarily defined and tabulated to establish a closer-outlook for the experts of far-reaching fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
An overview of thermal energy storage systems
Alva, G., Lin, Y., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2017.12.037 · Cited by 1,408
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
Liu, M., Steven Tay, N. H., Bell, S., Belusko, M., Jacob, R., Will, G., Saman, W., & Bruno, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.026 · Cited by 928
Recent advances in thermoelectric materials
Gayner, C., & Kar, K. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.07.002 · Cited by 918
Recent advances in thermoelectric nanocomposites
Liu, W., Yan, X., Chen, G., & Ren, Z. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.10.001 · Cited by 735
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Self-citationParaffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Nagatani, K., Kiribayashi, S., Okada, Y., Otake, K., Yoshida, K., Tadokoro, S., Nishimura, T., Yoshida, T., Koyanagi, E., Fukushima, M., et al. (2013) · Journal of Field Robotics · doi:10.1002/rob.21439 · Cited by 602
Karaipekli, A., Biçer, A., Sarı, A., & Tyagi, V. V. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.053 · Cited by 582
Notton, G., Nivet, M.-L., Voyant, C., Paoli, C., Darras, C., Motte, F., & Fouilloy, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.02.007 · Cited by 578
Zhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Self-citationTransient cooling of electronics using phase change material (PCM)-based heat sinks
Kandasamy, R., Wang, X.-Q., & Mujumdar, A. S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.010 · Cited by 506
Zhang, P., Meng, Z. N., Zhu, H., Wang, Y. L., & Peng, S. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 497
Self-citationKim, S., & Drzal, L. T. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.09.010 · Cited by 452
Characterization of Alkanes and Paraffin Waxes for Application as Phase Change Energy Storage Medium
HIMRAN, S., SUWONO, A., & MANSOORI, G. A. (1994) · Energy Sources · doi:10.1080/00908319408909065 · Cited by 437
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Khodadadi, J. M., Fan, L., & Babaei, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.031 · Cited by 422
Zhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418
Self-citationXia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Self-citation(2018) · Elsevier eBooks · doi:10.1016/c2015-1-01045-6 · Cited by 396
Wei, G., Wang, G., Xu, C., Ju, X., Xing, L., Du, X., & Yang, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.271 · Cited by 395
Mehrali, M., Latibari, S. T., Mehrali, M., Metselaar, H. S. C., & Silakhori, M. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.11.023 · Cited by 375
Cooling of mobile electronic devices using phase change materials
Tan, F. L., & Tso, C. P. (2004) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2003.09.005 · Cited by 363
Arshad, A., Ali, H. M., Ali, M., & Manzoor, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.090 · Cited by 345
Shi, J.-N., Ger, M.-D., Liu, Y.-M., Fan, Y.-C., Wen, N.-T., Lin, C.-K., & Pu, N.-W. (2013) · Carbon · doi:10.1016/j.carbon.2012.08.068 · Cited by 328
Yang, J., Qi, G.-Q., Bao, R.-Y., Yi, K., Li, M., Peng, L., Cai, Z., Yang, M.-B., Wei, D., & Yang, W. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.028 · Cited by 298
Application of TCE-PCM based heat sinks for cooling of electronic components: A review
Sahoo, S. K., Das, M. K., & Rath, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.238 · Cited by 297
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams
Mancin, S., Diani, A., Doretti, L., Hooman, K., & Rossetto, L. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.11.023 · Cited by 261
Chung, D. D. L. (2001) · Journal of Materials Engineering and Performance · doi:10.1361/105994901770345358 · Cited by 261
Reliability of thermal interface materials: A review
Due, J., & Robinson, A. J. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.06.013 · Cited by 258
Ali, H. M., Ashraf, M. J., Giovannelli, A., Irfan, M., Irshad, T. B., Hamid, H. M., Hassan, F., & Arshad, A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.044 · Cited by 248
Cui, T., Xuan, Y., & Li, Q. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.008 · Cited by 245
Arshad, A., Ali, H. M., Khushnood, S., & Jabbal, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.008 · Cited by 245
Rabha, D. K., & Muthukumar, P. (2017) · Solar Energy · doi:10.1016/j.solener.2017.04.012 · Cited by 244
Micro-scale energy harvesting devices: Review of methodological performances in the last decade
Selvan, K. V., & Mohamed Ali, M. S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.046 · Cited by 242
Thermal management of electronics devices with PCMs filled pin-fin heat sinks: A comparison
Ali, H. M., Arshad, A., Jabbal, M., & Verdin, P. G. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.065 · Cited by 232
From anisotropic graphene aerogels to electron- and photo-driven phase change composites
Li, G., Zhang, X., Wang, J., & Fang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07587h · Cited by 226
Ali, H. M., & Arshad, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.004 · Cited by 224
Zhu, W., Deng, Y., Wang, Y., Shen, S., & Gulfam, R. (2016) · Energy · doi:10.1016/j.energy.2016.01.055 · Cited by 200
Self-citationElghool, A., Basrawi, F., Ibrahim, T. K., Habib, K., Ibrahim, H., & Idris, D. M. N. D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.046 · Cited by 200
Carbon nanotube/paraffin/montmorillonite composite phase change material for thermal energy storage
Li, M., Guo, Q., & Nutt, S. (2017) · Solar Energy · doi:10.1016/j.solener.2017.02.003 · Cited by 198
Ashraf, M. J., Ali, H. M., Usman, H., & Arshad, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.114 · Cited by 196
Li, M., Wu, Z., & Tan, J. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.11.018 · Cited by 191
Characterization of nanostructured thermal interface materials – A review
McNamara, A. J., Joshi, Y., & Zhang, Z. M. (2012) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2011.10.014 · Cited by 191
Jiang, F., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.061 · Cited by 190
Zhang, X., Wen, R., Huang, Z., Tang, C., Huang, Y., Liu, Y., Fang, M., Wu, X., Min, X., & Xu, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.037 · Cited by 189
Recent progress in renewable energy – Remedy of energy crisis in Pakistan
Awan, A. B., & Khan, Z. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.01.089 · Cited by 184
Upper limits of air humidity for preventing warm respiratory discomfort
Toftum, J., Jørgensen, A. S., & Fanger, P. O. (1998) · Energy and Buildings · doi:10.1016/s0378-7788(97)00018-2 · Cited by 183
Luo, Z., Huang, Z., Xie, N., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.046 · Cited by 179
Guan, W.-M., Li, J.-H., Qian, T.-T., Wang, X., & Deng, Y. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.077 · Cited by 175
Metal foam embedded in SEBS/paraffin/HDPE form-stable PCMs for thermal energy storage
Chen, P., Gao, X., Wang, Y., Xu, T., Fang, Y., & Zhang, Z. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.041 · Cited by 175
Zhong, Y., Li, S., Wei, X., Liu, Z., Guo, Q., Shi, J., & Liu, L. (2010) · Carbon · doi:10.1016/j.carbon.2009.09.033 · Cited by 170
Ultra-high thermal effusivity materials for resonant ambient thermal energy harvesting
Cottrill, A. L., Liu, A. T., Kunai, Y., Koman, V. B., Kaplan, A., Mahajan, S. G., Liu, P., Toland, A. R., & Strano, M. S. (2018) · Nature Communications · doi:10.1038/s41467-018-03029-x · Cited by 168
Impact of Relative Humidity on Thermal Comfort in a Warm Environment
Jing, S., Li, B., Tan, M., & Liu, H. (2013) · Indoor and Built Environment · doi:10.1177/1420326x12447614 · Cited by 162
Lu, Z., Xu, B., Zhang, J., Zhu, Y., Sun, G., & Li, Z. (2014) · Solar Energy · doi:10.1016/j.solener.2014.08.008 · Cited by 161
Qian, Z., Shen, H., Fang, X., Fan, L., Zhao, N., & Xu, J. Z. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.11.033 · Cited by 160
Zhang, Q., Wang, H., Ling, Z., Fang, X., & Zhang, Z. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.04.008 · Cited by 149
Cui, T., Xuan, Y., Yin, E., Li, Q., & Li, D. (2017) · Energy · doi:10.1016/j.energy.2017.01.087 · Cited by 148
He, F., Li, X., Zhang, G., Zhong, G., & He, J. (2018) · International Journal of Energy Research · doi:10.1002/er.4081 · Cited by 148
Liu, X., & Rao, Z. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.11.010 · Cited by 147
Zhang, Q., He, Z., Fang, X., Zhang, X., & Zhang, Z. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.09.006 · Cited by 146
Krishnan, S., Garimella, S. V., & Kang, S.-H. (2005) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2005.848534 · Cited by 143
Ly, E., Piot, O., Wolthuis, R., Durlach, A., Bernard, P., & Manfait, M. (2007) · The Analyst · doi:10.1039/b715924b · Cited by 138
Significance of humidity and temperature on skin and upper airway symptoms
Reinikainen, L. M., & Jaakkola, J. J. K. (2003) · Indoor Air · doi:10.1111/j.1600-0668.2003.00155.x · Cited by 136
Li, Y., He, L., Zhang, X., Zhang, N., & Tian, D. (2017) · Advanced Materials · doi:10.1002/adma.201703802 · Cited by 133
Review on miniaturized paraffin phase change actuators, valves, and pumps
Ogden, S., Klintberg, L., Thornell, G., Hjort, K., & Bodén, R. (2013) · Microfluidics and Nanofluidics · doi:10.1007/s10404-013-1289-3 · Cited by 131
Zhang, X., Wang, X., & Wu, D. (2016) · Energy · doi:10.1016/j.energy.2016.06.017 · Cited by 130
Phase Change Microvalve for Integrated Devices
Pal, R., Yang, M., Johnson, B. N., Burke, D., & Burns, M. A. (2004) · Analytical Chemistry · doi:10.1021/ac0352934 · Cited by 129
Jiang, Z., Ouyang, T., Yang, Y., Chen, L., Fan, X., Chen, Y., Li, W., & Fei, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.052 · Cited by 127
Storing solar energy within Ag-Paraffin@Halloysite microspheres as a novel self-heating catalyst
Zhao, Y., Kong, W., Jin, Z., Fu, Y., Wang, W., Zhang, Y., Liu, J., & Zhang, B. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.013 · Cited by 120
Guan, M., Wang, K., Xu, D., & Liao, W. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.049 · Cited by 119
Zhao, J. Q., Luo, G., Wu, J., & Xia, H. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302929c · Cited by 117
A novel self-powered wireless temperature sensor based on thermoelectric generators
Shi, Y., Wang, Y., Deng, Y., Gao, H., Lin, Z., Zhu, W., & Ye, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.010 · Cited by 116
Karthik, M., Faik, A., & D’Aguanno, B. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.004 · Cited by 113
Agbossou, A., Zhang, Q., Sebald, G., & Guyomar, D. (2010) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2010.06.026 · Cited by 111
Characterization of Commercial Grade Paraffin wax as Latent Heat Storage material for Solar dryers
Agarwal, A., & Sarviya, R. M. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.01.086 · Cited by 108
Atouei, S. A., Rezania, A., Ranjbar, A. A., et al. (2018) · Energy · doi:10.1016/j.energy.2018.05.109 · Cited by 104
MALARIA RAPID DIAGNOSTIC TESTS IN TROPICAL CLIMATES: THE NEED FOR A COOL CHAIN
JORGENSEN, P., CHANTHAP, L., REBUENO, A., TSUYUOKA, R., & BELL, D. (2006) · The American Journal of Tropical Medicine and Hygiene · doi:10.4269/ajtmh.2006.74.750 · Cited by 103
Zheng, Y. H., Li, Z. F., Feng, S., Lucas, M., Wu, G. L., Li, Y., Li, C. H., & Jiang, G. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.052 · Cited by 100
Kaygusuz, K., & Sari, A. (2007) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/009083190957568 · Cited by 75
Zhao, J., Guo, Y. C., Feng, F., Tong, Q., WenShan, Q., & Wang, H. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.11.028 · Cited by 74
Experimental study on effective thermal conductivity of microcapsules based phase change composites
Wang, T., Wang, S., & Wu, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.068 · Cited by 72
Nie, C., Tong, X., Wu, S., Gong, S., & Peng, D. (2015) · RSC Advances · doi:10.1039/c5ra17152k · Cited by 71
Qian, W., Hu, X., He, W., Zhan, R., Liu, M., Zhou, D., Huang, Y., Hu, X., Wang, Z., Fei, G., et al. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.03.008 · Cited by 70
Wang, T., Jiang, Y., Huang, J., & Wang, S. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.108 · Cited by 69
A molecular dynamics study on thermal and mechanical properties of graphene–paraffin nanocomposites
Wang, Y., Yang, C., Cheng, Y., & Zhang, Y. (2015) · RSC Advances · doi:10.1039/c5ra12028d · Cited by 69
Li, Z., Wu, Y., Zhuang, B., Zhao, X., Tang, Y. Z., Ding, X., & Chen, K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.046 · Cited by 69
Sobolčiak, P., Abdelrazeq, H., Özerkan, N. G., Ouederni, M., Nógellová, Z., AlMaadeed, M. A., Karkri, M., & Krupa, I. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.050 · Cited by 68
Investigation of a graphite/paraffin phase change composite
Albouchi, F., Lachheb, M., Karkri, M., et al. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.09.008 · Cited by 65
Phase change materials in microactuators: Basics, applications and perspectives
Wilhelm, E., Richter, C., & Rapp, B. E. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.01.043 · Cited by 65
Thermal performance of LHSU for electronics under steady and transient operations modes
Ali, H. M., Arshad, A., Janjua, M. M., et al. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.120 · Cited by 63
Xu, B., Wang, B., Zhang, C., & Zhou, J. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.03.003 · Cited by 54
Luo, J.-F., Yin, H.-W., Li, W., Xu, Z., Shao, Z., Xu, X., & Chang, S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.019 · Cited by 48
Kinkelin, C., Lips, S., Soupremanien, U., Remondière, V., Dijon, J., Poche, H. L., Ollier, E., Zegaoui, M., Rolland, N., Rolland, P. A., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.034 · Cited by 47
Cui, T., Li, Q., Xuan, Y., & Zhang, P. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.07.036 · Cited by 46
Self-citationDual-level packaged phase change materials – thermal conductivity and mechanical properties
Tao, Z., Wang, H., Liu, J., Zhao, W., Liu, Z., & Guo, Q. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.05.030 · Cited by 44
Gulfam, R., Zhu, W., Xu, L. M., Cheema, I. I., Sheng, P., Zhao, G., & Deng, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.098 · Cited by 43
Self-citationPDMS-paraffin/graphene laminated films with electrothermally switchable haze
Park, J. Y., Song, H., Kim, T., Suk, J. W., Kang, T. J., Jung, D., & Kim, Y. H. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.014 · Cited by 40
Lim, D. K., Ahn, B. H., & Jeong, J. H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.004 · Cited by 39
Advances and significance of solar reflectors in solar energy technology in Pakistan
Akhtar, S., Hashmi, M. K., Ahmad, I., & Raza, R. (2018) · Energy & Environment · doi:10.1177/0958305x18758487 · Cited by 32
Digital de-waxing on FTIR images
de Lima, F. A., Gobinet, C., Sockalingum, G. D., Garcia, S. B., Manfait, M., Untereiner, V., Piot, O., & Bachmann, L. (2016) · The Analyst · doi:10.1039/c6an01975g · Cited by 28
Pechook, S., & Pokroy, B. (2013) · Soft Matter · doi:10.1039/c3sm27484e · Cited by 27
Gel‐Infused Slippery Surface with Enhanced Longevity and Thermally Controllable Sliding Properties
Zhu, G. H., Zhang, C., Wang, C., & Zacharia, N. S. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600515 · Cited by 26
Design and implementation of a paraffin-based micropositioning actuator
Dowen, D. (1997) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.284075 · Cited by 25
Maxa, J., Novikov, A., & Nowottnick, M. (2017) · Materials · doi:10.3390/ma11010031 · Cited by 25
Gulfam, R., Shi, Y., & Deng, Y. (2016) · International Bhurban Conference on Applied Sciences and Technology (IBCAST) · doi:10.1109/ibcast.2016.7429846 · Cited by 18
Self-citationA recyclable thermochromic elastic phase change oleogel for cold compress therapy
Zhang, Q., Wu, Y., Fang, X., Zhang, X., & Zhang, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.082 · Cited by 18
Thermal management of electronic devices by composite materials integrated in silicon
Ollier, E., Soupremanien, U., Remondière, V., Dijon, J., Poche, H. L., Seiler, A., Lefèvre, F., Lips, S., Kinkelin, C., Rolland, N., et al. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.03.016 · Cited by 17
Zhang, H., Yuan, Y., Zhang, N., Sun, Q., & Cao, X. (2016) · Scientific Reports · doi:10.1038/srep36974 · Cited by 13
Cited by
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 550
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
Li, Z., Lu, Y., Huang, R., Chang, J., Yu, X., Jiang, R., Yu, X., & Roskilly, A. P. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116277 · Cited by 342
Metadata
- Authors
- Gulfam, R., Zhang, P., & Meng, Z.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 238
- Pages
- 582-611
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2914588998
- Cited by
- 351
- References
- 112
- FWCI
- 22.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.