Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
Abstract Overcharge is one of the most severe safety problems for the large-scale application of lithium-ion batteries, and in-depth understanding of battery overcharge failure mechanism is required to guide the safety design of battery systems. In this paper, the overcharge performance of a commercial pouch lithium-ion battery with Liy(NiCoMn)1/3O2-LiyMn2O4 composite cathode and graphite anode is evaluated under various test conditions, considering the effects of charging current, restraining plate and heat dissipation. Charging current is found to have only minor influences on battery overcharge behaviors, whereas the battery overcharged with pressure relief design (restraining plate and cuts on pouches) and good heat dissipation shows significantly improved overcharge performance and can endure larger amount of overcharge capacity and higher temperature before thermal runaway. Characterizations on cathode and anode materials at different overcharge states are carried out to identify the side reactions inside the battery. The overcharged cathode suffers from electrolyte decomposition, transition metal dissolution and phase transition, but still exhibits no obvious exothermic behaviors before thermal runaway occurs. Severe lithium plating happens on the anode, and would accelerate the overcharge-induced thermal runaway process. Further analysis on the onset temperature of thermal runaway helps to reveal the overcharge-induced thermal runaway mechanism of lithium-ion batteries. The result shows that rupture of the pouch and separator melting are the two key factors for the initiation of thermal runaway during overcharge process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Self-citationThermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect
Wang, Q., Jiang, L., Yu, Y., & Sun, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.035 · Cited by 915
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
Stress evolution and capacity fade in constrained lithium-ion pouch cells
Cannarella, J., & Arnold, C. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.165 · Cited by 616
Ruiz, V., Pfrang, A., Kriston, A., Omar, N., Van den Bossche, P., & Boon-Brett, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.195 · Cited by 534
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
Self-citationZheng, Y., Ouyang, M., Han, X., Lu, L., & Li, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.094 · Cited by 490
Self-citationRen, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Self-citationZheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
Self-citationSimulation and experimental study on lithium ion battery short circuit
Zhao, R., Liu, J., & Gu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.016 · Cited by 342
Guo, R., Lu, L., Ouyang, M., & Feng, X. (2016) · Scientific Reports · doi:10.1038/srep30248 · Cited by 339
Self-citationA consideration of lithium cell safety
Tobishima, S., & Yamaki, J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00240-7 · Cited by 323
Gas generation mechanism due to electrolyte decomposition in commercial lithium-ion cell
Kumai, K., Miyashiro, H., Kobayashi, Y., Takei, K., & Ishikawa, R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00234-1 · Cited by 317
Ye, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Toxicity, a serious concern of thermal runaway from commercial Li-ion battery
Sun, J., Li, J., Zhou, T., Yang, K., Wei, S., Tang, N., Dang, N., Li, H., Qiu, X., & Chen, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.031 · Cited by 295
Ren, D., Smith, K., Guo, D., Han, X., Feng, X., Lu, L., Ouyang, M., & Li, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0661810jes · Cited by 295
Self-citationOvercharge failure investigation of lithium-ion batteries
Yuan, Q., Zhao, F., Wang, W., Zhao, Y., Liang, Z., & Yan, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.147 · Cited by 286
Yoon, W.-S., Chung, K. Y., McBreen, J., & Yang, X.-Q. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.06.005 · Cited by 282
Leising, R. A., Palazzo, M. J., Takeuchi, E. S., & Takeuchi, K. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379740 · Cited by 279
Ouyang, M., Ren, D., Lu, L., Li, J., Feng, X., Han, X., & Liu, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.051 · Cited by 271
Self-citationProgress of Chinese electric vehicles industrialization in 2015: A review
Du, J., & Ouyang, D. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.129 · Cited by 260
Eshetu, G. G., Grugeon, S., Laruelle, S., Boyanov, S., Lecocq, A., Bertrand, J.-P., & Marlair, G. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51315g · Cited by 249
Huang, P., Ping, P., Li, K., Chen, H., Wang, Q., Wen, J., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.160 · Cited by 249
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D., & Yang, M.-H. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 243
Chen, Z., Xiong, R., Lu, J., & Li, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.068 · Cited by 221
Integrated computation model of lithium-ion battery subject to nail penetration
Liu, B., Yin, S., & Xu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.101 · Cited by 219
Feng, X., He, X., Ouyang, M., Wang, L., Lu, L., Ren, D., & Santhanagopalan, S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311816jes · Cited by 194
Self-citationFinegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Di Michiel, M., Hinds, G., Brett, D. J. L., & Shearing, P. R. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04251a · Cited by 189
Multi-scale study of thermal stability of lithiated graphite
Chen, Z., Qin, Y., Ren, Y., Lu, W., Orendorff, C., Roth, E. P., & Amine, K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01786a · Cited by 177
Feng, X., Zheng, S., He, X., Wang, L., Wang, Y., Ren, D., & Ouyang, M. (2018) · Frontiers in Energy Research · doi:10.3389/fenrg.2018.00126 · Cited by 159
Self-citationZhu, J., Zhang, X., Luo, H., & Sahraei, E. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.007 · Cited by 142
Investigation of the kinetic mechanism in overcharge process for Li-ion battery
Belov, D. G., & Yang, M. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.04.031 · Cited by 135
Coman, P. T., Mátéfi‐Tempfli, S., Veje, C. T., & White, R. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0631709jes · Cited by 126
Nam, K., Yoon, W., Shin, H., Chung, K. Y., Choi, S., & Yang, X. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.088 · Cited by 121
Sharma, N., & Peterson, V. K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.019 · Cited by 97
Yang, X. Q. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390768 · Cited by 95
Bareño, J., Rago, N. L. D., Doğan, F., GRACZYK, D. G., Tsai, Y., Naik, S. R., Han, S., Lee, E., Du, Z., Sheng, Y., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.061 · Cited by 36
Cited by
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Self-citationA comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries
Ren, D., Hsu, H., Li, R., Feng, X., Guo, D., Han, X., Lu, L., He, X., Gao, S., Hou, J., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100034 · Cited by 489
Self-citationXiong, R., Sun, W., Yu, Q., & Sun, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115855 · Cited by 481
Jiang, X., Chen, Y., Meng, X., Cao, W., Liu, C., Huang, Q., Naik, N., Murugadoss, V., Huang, M., & Guo, Z. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.011 · Cited by 308
A comprehensive review on thermal management systems for power lithium-ion batteries
Zichen, W., & Changqing, D. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110685 · Cited by 294
Metadata
- Authors
- Ren, D., Feng, X., Lu, L., He, X., & Ouyang, M.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 250
- Pages
- 323-332
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2944737657
- Cited by
- 387
- References
- 41
- FWCI
- 13.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.