The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Flexible thermoelectric generators for body heat harvesting – Enhanced device performance using high thermal conductivity elastomer encapsulation on liquid metal interconnects
Open accessAbstract
Abstract This paper reports flexible thermoelectric generators (TEGs) employing eutectic gallium indium (EGaIn) liquid metal interconnects encased in a novel, high thermal conductivity (HTC) elastomer. These TEGs are part of a broader effort to harvest thermal energy from the body and convert it into electrical energy to power wearable electronics. The flexible TEGs reported in this paper employ the same thermoelectric legs' used in rigid TEGs, thus eliminating the need to develop new materials specifically for flexible TEGs that often sacrifice the so-called figure of merit' for flexibility. Flexible TEGs reported here embed rigid thermoelectric legs' in soft and flexible packaging, using stretchable EGaIn interconnects. The use of liquid metal interconnects provides ultimate stretchability and low electrical resistance between the thermoelectric legs. The liquid metal lines are encased in a new stretchable silicone elastomer doped with both graphene nano-platelets and EGaIn to increase its thermal conductivity. This high thermal conductivity elastomer not only reduces the parasitic thermal resistance of the encapsulation layer but it also serves as a heat spreader, leading to 1.7X improvement in the output power density of TEGs compared to devices fabricated with a conventional elastomer. The device performance is further improved by a thin Cu layer acting as a heat spreader providing an additional 1.3X enhancement in the output power at 1.2 m/s air velocity (typical walking speed). Worn on the wrist, our best devices achieve power levels in excess of 30 μW/cm2 at an air velocity of 1.2 m/s outperforming previously reported flexible TEGs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm
Dagdeviren, C., Yang, B. D., Su, Y., Tran, P. L., Joe, P., Anderson, E., Xia, J., Doraiswamy, V., Dehdashti, B., Feng, X., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1317233111 · Cited by 975
Energy Harvesting Wireless Communications: A Review of Recent Advances
Ulukus, S., Yener, A., Erkip, E., Simeone, O., Zorzi, M., Grover, P., & Huang, K. (2015) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2015.2391531 · Cited by 805
Electromagnetic generator for harvesting energy from human motion
Saha, C. R., O’Donnell, T., Wang, N., & McCloskey, P. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2008.03.008 · Cited by 608
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Silk fabric-based wearable thermoelectric generator for energy harvesting from the human body
Lu, Z., Zhang, H., Mao, C., & Li, C. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.038 · Cited by 326
Oh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process
Kim, S. J., Lee, H. E., Choi, H., Kim, Y., We, J. H., Shin, J. S., Lee, K. J., & Cho, B. J. (2016) · ACS Nano · doi:10.1021/acsnano.6b05004 · Cited by 257
Cited by
Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
Jia, Y., Jiang, Q., Sun, H., Liu, P., Hu, D., Pei, Y., Liu, W., Crispin, X., Fabiano, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102990 · Cited by 600
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Advances in the design and assembly of flexible thermoelectric device
Cao, T., Shi, X.-L., & Chen, Z.-G. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101003 · Cited by 387
Shaping a Soft Future: Patterning Liquid Metals
Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023) · Advanced Materials · doi:10.1002/adma.202205196 · Cited by 311
Self-citation
Metadata
- Authors
- Sargolzaeiaval, Y., Padmanabhan Ramesh, V., Neumann, T. V., Misra, V., Vashaee, D., Dickey, M. D., & Öztürk, M. C.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 262
- Pages
- 114370
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W3004088439
- Cited by
- 181
- References
- 8
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Flexible thermoelectric generators for body heat harvesting – Enhanced device performance using high thermal conductivity elastomer encapsulation on liquid metal interconnects. https://app.cochat.ai/papers/10.1016/j.apenergy.2019.114370
- The paper
- Sargolzaeiaval, Y., Padmanabhan Ramesh, V., Neumann, T. V., Misra, V., Vashaee, D., Dickey, M. D., & Öztürk, M. C. (2020). Flexible thermoelectric generators for body heat harvesting – Enhanced device performance using high thermal conductivity elastomer encapsulation on liquid metal interconnects. Applied Energy. https://doi.org/10.1016/j.apenergy.2019.114370
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.