The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy
Abstract
The strength-ductility trade-off has been the long-standing barrier in the pursuit of high-performance structural materials. Here, by exploiting the merit of interstitial nitrogen, a novel additive manufacture-based approach is proposed to process the hierarchically heterogeneous structured FeCoNiCrN high-entropy alloy (HEA). Compared to the undoped alloy, the 1.8 at. % nitrogen-doped HEA shows a simultaneous increase in both strength and ductility, thereby producing exceptional combination of tensile strength (853 MPa) and elongation (34 %) that outperforms many other single phase FCC HEAs. The unusual inverse strength-ductility relationship is ascribed to the strong strengthening effect and progressive strain hardening arising from the hierarchically heterogeneous structure, the latter of which is highly beneficial to the ductility. The present approach creates heterogeneous structure avoiding surface-mechanical or thermo-mechanical treatments, and thus, enables to produce readily available components with complex geometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Cited by
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Additive manufactured high entropy alloys: A review of the microstructure and properties
Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110875 · Cited by 255
Metadata
- Authors
- Song, M., Zhou, R., Gu, J., Wang, Z., Ni, S., & Liu, Y.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 18
- Pages
- 100498
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2990184184
- Cited by
- 162
- References
- 2
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.