The DOI matches its Crossref record; 171 of the 171 references it cites were found in a registry or an index.
Additive manufactured high entropy alloys: A review of the microstructure and properties
Open accessAbstract
High entropy alloys (HEAs) are promising multi-component alloys with unique combination of novel microstructures and excellent properties. However, there are still certain limitations in the fabrication of HEAs by conventional methods. Additive manufactured HEAs exhibit optimized microstructures and improved properties, and there is a significantly increasing trend on the application of additive manufacturing (AM) techniques in producing HEAs in recent years. This review summarizes the additive manufactured HEAs in terms of microstructure characteristics, mechanical and some functional properties reported so far, and provides readers with a fundamental understanding of this research field. We first briefly review the application of AM methods and the applied HEAs systems, then the microstructure including the relative density, residual stress, grain structure, texture and dislocation networks, element distribution, precipitations and the influence of post-treatment on the microstructural evolution, next the mechanical properties consisting of hardness, tensile properties, compressive properties, cryogenic and high-temperature properties, fatigue properties, creep behavior, post-treatment effect and the strengthening mechanisms analysis. Thereafter, emerging functional properties of additive manufactured HEAs, namely the corrosion resistance, oxidation behaviors, magnetic properties as well as hydrogen storage properties are discussed, respectively. Finally, the current challenges and future work are proposed based on the current research status of this topic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Cited by
Gao, G., Zhu, G., Chen, X., Sun, Z., & Cabot, A. (2023) · ACS Nano · doi:10.1021/acsnano.3c05810 · Cited by 278
Metadata
- Authors
- Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2022-08
- Volume
- 220
- Pages
- 110875
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4283394810
- Cited by
- 255
- References
- 171
- FWCI
- 17.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufactured high entropy alloys: A review of the microstructure and properties. https://app.cochat.ai/papers/10.1016/j.matdes.2022.110875
- The paper
- Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y. (2022). Additive manufactured high entropy alloys: A review of the microstructure and properties. Materials & Design. https://doi.org/10.1016/j.matdes.2022.110875
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.