The DOI matches its Crossref record; 151 of the 151 references it cites were found in a registry or an index.
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
Open accessAbstract
3D printing by fused deposition modeling (FDM) is an advanced additive manufacturing technology for making thermoplastic-based structures. Several studies have recently investigated 3D printing of polylactic acid (PLA) with biomass resources like cellulose, hemicellulose, lignin and whole biomass. Such biodegradable composites are better for the environment and can be used to replace non-biodegradable composites in a variety of applications. Therefore, a deep understanding of printing such biocomposites is needed for supporting such manufacturing. Recent developments focused on FDM printing of PLA filled with biomass resources have been critically reviewed to reveal the intricate aspects of manufacturing of such materials and characterization of the changes caused by biomass-based fillers. Properties of high molecular weight PLA, essentials of printing with PLA and conditions for filament extrusion and printing of biocomposites are discussed. Characterization results from mechanical testing, thermal analysis, viscoelastic properties, imaging and spectroscopy are reviewed for understanding the impact of filling biomass resources in PLA by printing. The latter sections discuss applications, upcycling & recycling and future opportunities for biorefineries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Self-citationLignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Self-citationSilica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Astm, I. (2007) · Medical Entomology and Zoology · Cited by 1,943
Mesopelagic fish biomass and trophic efficiency of the open ocean
Irigoien, X., Klevjer, J., Røstad, A., Martínez, U., Boyra, G., Acuña, J. L., Bode, A., Echevarrı́a, F., González-Gordillo, J. L., Hernández‐León, S., et al. (2014) · DIGITAL.CSIC (Spanish National Research Council (CSIC)) · Cited by 1,813
The Practical Handbook of Compost Engineering
Haug, R. T. (2018) · Routledge eBooks · doi:10.1201/9780203736234 · Cited by 1,637
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Cited by
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Self-citationSustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
Self-citationBikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Metadata
- Authors
- Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., Pu, Y., Ozcan, S., & Ragauskas, A. J.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 24
- Pages
- 101078
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W3166745548
- Cited by
- 337
- References
- 151
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries. https://app.cochat.ai/papers/10.1016/j.apmt.2021.101078
- The paper
- Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., Pu, Y., Ozcan, S., & Ragauskas, A. J. (2021). Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries. Applied Materials Today. https://doi.org/10.1016/j.apmt.2021.101078
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.