The DOI matches its Crossref record; 151 of the 151 references it cites were found in a registry or an index.
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
Open accessAbstract
3D printing by fused deposition modeling (FDM) is an advanced additive manufacturing technology for making thermoplastic-based structures. Several studies have recently investigated 3D printing of polylactic acid (PLA) with biomass resources like cellulose, hemicellulose, lignin and whole biomass. Such biodegradable composites are better for the environment and can be used to replace non-biodegradable composites in a variety of applications. Therefore, a deep understanding of printing such biocomposites is needed for supporting such manufacturing. Recent developments focused on FDM printing of PLA filled with biomass resources have been critically reviewed to reveal the intricate aspects of manufacturing of such materials and characterization of the changes caused by biomass-based fillers. Properties of high molecular weight PLA, essentials of printing with PLA and conditions for filament extrusion and printing of biocomposites are discussed. Characterization results from mechanical testing, thermal analysis, viscoelastic properties, imaging and spectroscopy are reviewed for understanding the impact of filling biomass resources in PLA by printing. The latter sections discuss applications, upcycling & recycling and future opportunities for biorefineries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Self-citationLignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Self-citationSilica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Astm, I. (2007) · Medical Entomology and Zoology · Cited by 1,943
Mesopelagic fish biomass and trophic efficiency of the open ocean
Irigoien, X., Klevjer, J., Røstad, A., Martínez, U., Boyra, G., Acuña, J. L., Bode, A., Echevarrı́a, F., González-Gordillo, J. L., Hernández‐León, S., et al. (2014) · DIGITAL.CSIC (Spanish National Research Council (CSIC)) · Cited by 1,813
The Practical Handbook of Compost Engineering
Haug, R. T. (2018) · Routledge eBooks · doi:10.1201/9780203736234 · Cited by 1,637
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications
(2010) · Wiley eBooks · doi:10.1002/9780470649848 · Cited by 1,058
Awaja, F., & Pavel, D. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.005 · Cited by 1,045
Jonoobi, M., Harun, J., Mathew, A. P., & Oksman, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.07.005 · Cited by 863
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672
Biodegradability and biodegradation of poly(lactide)
Tokiwa, Y., & Calabia, B. P. (2006) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-006-0488-1 · Cited by 665
Combining polyethylene and polypropylene: Enhanced performance with PE/ i PP multiblock polymers
Eagan, J. M., Xu, J., Di Girolamo, R., Thurber, C. M., Macosko, C. W., LaPointe, A. M., Bates, F. S., & Coates, G. W. (2017) · Science · doi:10.1126/science.aah5744 · Cited by 654
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy
Langholtz, M. H., Stokes, B. J., & Eaton, L. M. (2016) · doi:10.2172/1271651 · Cited by 609
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Dazzi, A., Prater, C. B., Hu, Q., Chase, D. B., Rabolt, J. F., & Marcott, C. (2012) · Applied Spectroscopy · doi:10.1366/12-06804 · Cited by 557
Satlewal, A., Agrawal, R., Bhagia, S., Sangoro, J., & Ragauskas, A. J. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.08.009 · Cited by 552
Self-citationEffect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Fernandez-Vicente, M., Calle, W., Ferrandiz, S., & Conejero, A. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0036 · Cited by 535
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Chen, L., Zhu, J. Y., Baez, C., Kitin, P., & Elder, T. (2016) · Green Chemistry · doi:10.1039/c6gc00687f · Cited by 514
Rheology of Filled Polymer Systems
Shenoy, A. V. (1999) · Springer eBooks · doi:10.1007/978-94-015-9213-0 · Cited by 501
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
Morphology and thermal properties of PLA–cellulose nanofibers composites
Frone, A. N., Berlioz, S., Chailan, J.-F., & Panaitescu, D. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.054 · Cited by 431
Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures
Abeykoon, C., Sri-Amphorn, P., & Fernando, A. (2020) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.03.003 · Cited by 417
3D printing filament as a second life of waste plastics—a review
Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10657-8 · Cited by 382
Effect of wood content in FDM filament on properties of 3D printed parts
Kariz, M., Sernek, M., Obućina, M., & Kuzman, M. K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.016 · Cited by 360
Kreiger, M. A., Mulder, M. L., Glover, A. G., & Pearce, J. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.009 · Cited by 350
On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid
Sanchez-Garcia, M. D., & Lagaron, J. M. (2010) · Cellulose · doi:10.1007/s10570-010-9430-x · Cited by 334
Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer
Letcher, T., & Waytashek, M. (2014) · Volume 2A: Advanced Manufacturing · doi:10.1115/imece2014-39379 · Cited by 325
Tingaut, P., Zimmermann, T., & Lopez-Suevos, F. (2010) · Biomacromolecules · doi:10.1021/bm901186u · Cited by 323
Physicochemical properties of PLA lignin blends
Gordobil, O., Egüés, I., Llano-Ponte, R., & Labidi, J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.002 · Cited by 312
Kraft lignin as filler in PLA to improve ductility and thermal properties
Gordobil, O., Delucis, R., Egüés, I., & Labidi, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.01.055 · Cited by 299
Cai, H., Dave, V., Gross, R. A., & McCarthy, S. P. (1996) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19961130)34:16<2701::aid-polb2>3.0.co;2-s · Cited by 290
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Pillin, I., Montrelay, N., Bourmaud, A., & Grohens, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.005 · Cited by 289
Tensile strength of commercial polymer materials for fused filament fabrication 3D printing
Tanikella, N. G., Wittbrodt, B., & Pearce, J. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.03.005 · Cited by 287
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Spoerk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S., & Holzer, C. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1399531 · Cited by 282
3D printing of high density polyethylene by fused filament fabrication
Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.003 · Cited by 271
Distributed recycling of waste polymer into RepRap feedstock
Baechler, C., DeVuono, M., & Pearce, J. M. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302978 · Cited by 269
Development of renewable energy sources market and biofuels in The European Union
Bórawski, P., Bełdycka-Bórawska, A., Szymańska, E. J., Jankowski, K. J., Dubis, B., & Dunn, J. W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.242 · Cited by 253
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Cruz Sanchez, F. A., Boudaoud, H., Hoppe, S., & Camargo, M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.013 · Cited by 243
Maleation of polylactide (PLA) by reactive extrusion
Carlson, D., Nie, L., Narayan, R., & Dubois, P. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990425)72:4<477::aid-app3>3.0.co;2-q · Cited by 242
Potential Synergies and Challenges in Refining Cellulosic Biomass to Fuels, Chemicals, and Power
Wyman, C. E. (2003) · Biotechnology Progress · doi:10.1021/bp025654l · Cited by 239
A Review of Water‐Resistant Hemicellulose‐Based Materials: Processing and Applications
Farhat, W., Venditti, R. A., Hubbe, M., Taha, M., Becquart, F., & Ayoub, A. (2017) · ChemSusChem · doi:10.1002/cssc.201601047 · Cited by 239
Kowalczyk, M., Piorkowska, E., Kulpinski, P., & Pracella, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.07.003 · Cited by 236
Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose
Cunha, A. G., & Gandini, A. (2010) · Cellulose · doi:10.1007/s10570-010-9434-6 · Cited by 233
Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Murphy, C. A., & Collins, M. N. (2018) · Polymer Composites · doi:10.1002/pc.24069 · Cited by 233
Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
Woern, A. L., Byard, D. J., Oakley, R. B., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2018) · Materials · doi:10.3390/ma11081413 · Cited by 233
Zhong, S., & Pearce, J. M. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.023 · Cited by 232
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228
(2018) · Physics Subject Headings (PhySH) · doi:10.29172/8bfd6fc0-fbfb-463d-bb6c-7bde43d5b93f · Cited by 224
Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing
Tanase-Opedal, M., Espinosa, E., Rodríguez, A., & Chinga-Carrasco, G. (2019) · Materials · doi:10.3390/ma12183006 · Cited by 224
Production and 3D printing processing of bio-based thermoplastic filament
Gkartzou, E., Koumoulos, E. P., & Charitidis, C. A. (2017) · Manufacturing Review · doi:10.1051/mfreview/2016020 · Cited by 222
Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
Kim, Y., Yoon, C., Ham, S., Park, J., Kim, S., Kwon, O., & Tsai, P.-J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02805 · Cited by 220
Wang, M., Favi, P., Cheng, X., Golshan, N. H., Ziemer, K. S., Keidar, M., & Webster, T. J. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.030 · Cited by 217
Ravi, A. K., Deshpande, A., & Hsu, K. H. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.08.007 · Cited by 217
Zell, M. T., Padden, B. E., Paterick, A. J., Thakur, K. A. M., Kean, R. T., Hillmyer, M. A., & Munson, E. J. (2002) · Macromolecules · doi:10.1021/ma0204148 · Cited by 215
Synthesis, Structure and Properties of Poly(lactic acid)
(2018) · Advances in Polymer Science · doi:10.1007/978-3-319-64230-7 · Cited by 211
Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206
Cork–PLA composite filaments for fused deposition modelling
Daver, F., Lee, K. P. M., Brandt, M., & Shanks, R. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.008 · Cited by 190
Rice straw as a feedstock for biofuels: Availability, recalcitrance, and chemical properties
Satlewal, A., Agrawal, R., Bhagia, S., Das, P., & Ragauskas, A. J. (2018) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1818 · Cited by 188
Self-citationLiu, H., He, H., Peng, X., Huang, B., & Li, J. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4524 · Cited by 180
Hygromorphic materials for sustainable responsive architecture
Holstov, A., Bridgens, B., & Farmer, G. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.136 · Cited by 173
ORIGINAL RESEARCH: The eco-profile for current Ingeo ® polylactide production
Vink, E. T. H., Davies, S., & Kolstad, J. J. (2010) · Industrial Biotechnology · doi:10.1089/ind.2010.6.212 · Cited by 165
Barriers and enablers for prescribed burns for wildfire management in California
Miller, R. K., Field, C. B., & Mach, K. J. (2020) · Nature Sustainability · doi:10.1038/s41893-019-0451-7 · Cited by 165
Cisneros‐López, E. O., Pal, A. K., Rodriguez, A. U., Wu, F., Misra, M., Mielewski, D. F., Kızıltaş, A., & Mohanty, A. K. (2019) · Materials Today Sustainability · doi:10.1016/j.mtsust.2019.100027 · Cited by 160
Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen
Fuentes‐Audén, C., Herrera, J. A. S., Jerez, A., Navarro, F. J., Martínez-Boza, F. J., Partal, P., & Gallegos, C. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.09.006 · Cited by 154
Vibrational analysis of poly(L‐lactic acid)
Kister, G., Cassanas, G., Vert, M., Pauvert, B., & Terol, A. (1995) · Journal of Raman Spectroscopy · doi:10.1002/jrs.1250260409 · Cited by 152
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xiao, X., Chevali, V. S., Song, P., Dongning, H., & Wang, H. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107887 · Cited by 147
Nano-FTIR chemical mapping of minerals in biological materials
Amarie, S., Zaslansky, P., Kajihara, Y., Griesshaber, E., Schmahl, W. W., & Keilmann, F. (2012) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.3.35 · Cited by 144
Effect of Maleated Compatibilizer on Performance of PLA/Wheat Straw‐Based Green Composites
Nyambo, C., Mohanty, A. K., & Misra, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000403 · Cited by 141
Crystal Nucleation in Glassy Poly( l -lactic acid)
Androsch, R., & Lorenzo, M. L. D. (2013) · Macromolecules · doi:10.1021/ma401036j · Cited by 141
Effect of MAH-g-PLA on the Properties of Wood Fiber/Polylactic Acid Composites
Zhang, L., Lv, S., Sun, C., Wan, L., Tan, H., & Zhang, Y. (2017) · Polymers · doi:10.3390/polym9110591 · Cited by 138
All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Wang, J., Chiappone, A., Roppolo, I., Shao, F., Fantino, E., Lorusso, M., Rentsch, D., Dietliker, K., Pirri, C. F., & Grützmacher, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201710951 · Cited by 131
Tarrés, Q., Melbø, J. K., Delgado‐Aguilar, M., Espinach, F. X., Mutjé, P., & Chinga‐Carrasco, G. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.009 · Cited by 130
Xu, W., Pranovich, A. V., Uppstu, P., Wang, X., Kronlund, D., Hemming, J. E., Öblom, H., Moritz, N., Preis, M., Sandler, N., et al. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.069 · Cited by 129
Heggset, E. B., Strand, B. L., Sundby, K. W., Simon, S., Chinga‐Carrasco, G., & Syverud, K. (2018) · Cellulose · doi:10.1007/s10570-018-2142-3 · Cited by 127
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02351 · Cited by 126
Siakeng, R., Jawaid, M., Ariffin, H., & Sapuan, S. M. (2018) · Polymer Composites · doi:10.1002/pc.24978 · Cited by 125
Nucleation and crystallization kinetics of poly(lactic acid)
Santis, F. D., Pantani, R., & Titomanlio, G. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.05.034 · Cited by 119
Hubbe, M. A., Rojas, O. J., & Lucia, L. A. (2015) · BioResources · doi:10.15376/biores.10.3.hubbe · Cited by 118
Long, H., Wu, Z., Dong, Q., Shen, Y., Zhou, W., Luo, Y. M., Zhang, C., & Dong, X. (2018) · Polymer Engineering and Science · doi:10.1002/pen.25043 · Cited by 118
Compatibility of Kraft Lignin, Organosolv Lignin and Lignosulfonate With PLA in 3D Printing
Mimini, V., Sykacek, E., Hashim, S. N. A. S., Holzweber, J., Hettegger, H., Fackler, K., Potthast, A., Mundigler, N., & Rosenau, T. (2019) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2018.1488875 · Cited by 118
Compatibilization of immiscible poly(l-lactide) and low density polyethylene blends
Kim, Y. F., Choi, C. N., Kim, Y. D., Lee, K. Y., & Lee, M. (2004) · Fibers and Polymers · doi:10.1007/bf02875524 · Cited by 114
Ecker, J. V., Haider, A., Burzic, I., Huber, A., Eder, G., & Hild, S. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2018-0149 · Cited by 114
Prasad, N., Agarwal, V. K., & Sinha, S. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-016-0416-x · Cited by 113
High-Strength Polylactic Acid (PLA) Biocomposites Reinforced by Epoxy-Modified Pine Fibers
Zhao, X., Li, K., Wang, Y., Tekinalp, H., Larsen, G. S., Rasmussen, D., Ginder, R. S., Wang, L., Gardner, D. J., Tajvidi, M., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03463 · Cited by 113
Self-citationDistributed Recycling of Post-Consumer Plastic Waste in Rural Areas
Kreiger, M. A., Anzalone, G. C., Mulder, M., Glover, A. G., & Pearce, J. M. (2013) · MRS Proceedings · doi:10.1557/opl.2013.258 · Cited by 112
Wang, Z., Xu, J., Lu, Y., Hu, L., Fan, Y., Ma, J., & Zhou, X. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.09.061 · Cited by 112
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11111778 · Cited by 112
McIlroy, C., & Graham, R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.018 · Cited by 106
Chandra, R. P., Lehtonen, L. K., & Ragauskas, A. J. (2004) · Biotechnology Progress · doi:10.1021/bp0300366 · Cited by 105
Self-citationExperimental analysis of an extrusion system for additive manufacturing based on polymer pellets
Volpato, N., Kretschek, D., Foggiatto, J. A., & Cruz, C. M. G. D. S. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7300-2 · Cited by 104
Recycling possibilities of bioplastics based on PLA/PHB blends
Plavec, R., Hlaváčiková, S., Omaníková, L., Feranc, J., Vanovčanová, Z., Tomanová, K., Bočkaj, J., Kruželák, J., Medlenová, E., Gálisová, I., et al. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106880 · Cited by 102
Comparative biodegradation of HDPE and LDPE using an indigenously developed microbial consortium.
Satlewal, A., Soni, R., Zaidi, M. G. H., Shouche, Y. S., & Goel, R. (2008) · PubMed · Cited by 100
Self-citationKumar, A., Tumu, V. R., Chowdhury, S. R., & Ramana Reddy, S. V. S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.057 · Cited by 99
Crystallization behavior of poly(lactic acid)/microfibrillated cellulose composite
Song, Y., Tashiro, K., Xu, D., Liu, J., & Bin, Y. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.054 · Cited by 96
Hu, X., Kang, H., Li, Y., Geng, Y., Wang, R., & Zhang, L. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.045 · Cited by 94
Dong, J., Li, M., Zhou, L., Lee, S., Mei, C., Xu, X., & Wu, Q. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24333 · Cited by 92
Bustos, G., Moldes, A. B., Alonsó, J. L., & Vázquez, M. (2004) · Food Microbiology · doi:10.1016/s0740-0020(03)00061-3 · Cited by 91
Cross‐Linked Nanocellulosic Materials and Their Applications
Liang, L., Bhagia, S., Li, M., Huang, C., & Ragauskas, A. J. (2019) · ChemSusChem · doi:10.1002/cssc.201901676 · Cited by 91
Self-citation3D Bioprinting of Lignocellulosic Biomaterials
Shavandi, A., Hosseini, S., Okoro, O. V., Nie, L., Babadi, F. E., & Melchels, F. P. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001472 · Cited by 89
Guen, M.-J. L., Hill, S., Smith, D. A., Theobald, B., Gaugler, E. C., Barakat, A., & Mayer‐Laigle, C. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00735 · Cited by 87
Shape fidelity and structure of 3D printed high consistency nanocellulose
Klar, V., Pere, J., Turpeinen, T., Kärki, P., Orelma, H., & Kuosmanen, P. (2019) · Scientific Reports · doi:10.1038/s41598-019-40469-x · Cited by 84
A dynamic model for nozzle clog monitoring in fused deposition modelling
Tlegenov, Y., Wong, Y. S., & Hong, G. S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0054 · Cited by 83
Infrared and antimicrobial studies on different lignins
Nada, A. M. A., El‐Diwany, A. I., & El-Shafei, A. (1989) · Acta Biotechnologica · doi:10.1002/abio.370090322 · Cited by 82
Improving interfacial adhesion in pla/wood biocomposites
Faludi, G., Dora, G., Renner, K. E., Móczó, J., & Pukánszky, B. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.09.009 · Cited by 80
Li, L., Chen, Y., Yu, T., Wang, N., Wang, C., & Wang, H. (2019) · Composites Communications · doi:10.1016/j.coco.2019.10.004 · Cited by 79
Effect of Compatibilizer on PLA/PP Blend for Injection Molding
Pivsa‐Art, S., Kord-Sa-Ard, J., Pivsa‐Art, W., Wongpajan, R., O-Charoen, N., Pavasupree, S., & Hamada, H. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.05.046 · Cited by 77
Nanoscale infrared spectroscopy as a non-destructive probe of extraterrestrial samples
Dominguez, G., McLeod, A. S., Gainsforth, Z., Kelly, P., Bechtel, H. A., Keilmann, F., Westphal, A. J., Thiemens, M. H., & Basov, D. N. (2014) · Nature Communications · doi:10.1038/ncomms6445 · Cited by 76
Costanzo, A., Spotorno, R., Candal, M., Fernández, M. M., Müller, A., Graham, R., Cavallo, D., & McIlroy, C. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101415 · Cited by 73
Bhagia, S., Li, H., Gao, X., Kumar, R., & Wyman, C. E. (2016) · Biotechnology for Biofuels · doi:10.1186/s13068-016-0660-5 · Cited by 67
Self-citationOkra (Abelmoschus esculentus) Fibre Based PLA Composites: Mechanical Behaviour and Biodegradation
Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., Foresti, M. L., Vázquez, A., & Kenny, J. M. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0571-5 · Cited by 64
Aqueous Dispersions of Esterified Lignin Particles for Hydrophobic Coatings
Hua, Q., Liu, L., Karaaslan, M. A., & Renneckar, S. H. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00515 · Cited by 64
Crystallization and Thermal Properties
Fambri, L., & Migliaresi, C. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch9 · Cited by 61
Farhat, W., Venditti, R. A., Ayoub, A. S., Prochazka, F., Fernández‐de‐Alba, C., Mignard, N., Taha, M., & Becquart, F. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.013 · Cited by 61
Johari, A. P., Kurmvanshi, S. K., Mohanty, S., & Nayak, S. K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.12.038 · Cited by 60
Biobased Poly(ethylene terephthalate)/Poly(lactic acid) Blends Tailored with Epoxide Compatibilizers
You, X., Snowdon, M. R., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b01353 · Cited by 60
Polylactic acid-based wood-plastic 3D printing composite and its properties
Liu, L., Lin, M., Zhang, X., & Lin, M. (2019) · BioResources · doi:10.15376/biores.14.4.8484-8498 · Cited by 59
Characterization and 3D printability of poly (lactic acid)/acetylated tannin composites
Liao, J., Brosse, N., Pizzi, A., Hoppe, S., Zhou, X., & Du, G. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112320 · Cited by 58
Improving the Economic Values of the Recycled Plastics Using Nanotechnology Associated Studies
Khan, W. S., Asmatulu, R., Davuluri, S. P., & Dandin, V. K. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2014.07.006 · Cited by 56
Recent development in thermoplastic/wood composites and nanocomposites: A review
Borah, J. S., & Kim, D. S. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-016-0183-6 · Cited by 56
New opportunities to valorize biomass wastes into green materials
Spiridon, I., Darie-Niță, R. N., Hitruc, E. G., Ludwiczak, J. M., Spiridon, I. A., & Niculaua, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.143 · Cited by 55
Microbial degradation of poly-(l-lactic acid) oligomers
Karjomaa, S., Suortti, T., Lempiäinen, R., Selin, J., & Itävaara, M. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00204-8 · Cited by 50
Wood and natural fiber composites current trend in consumer goods and automotive parts
Partanen, A., & Carus, M. (2016) · Reinforced Plastics · doi:10.1016/j.repl.2016.01.004 · Cited by 50
(2018) · Advanced Sustainable Systems · doi:10.1002/(issn)2366-7486 · Cited by 50
Yang, T.-H., Yang, T.-H., Chao, W.-C., & Leu, S. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.019 · Cited by 49
Wang, Q., Ji, C., Sun, J., Yao, Q., Liu, J., Saeed, R. M. Y., & Zhu, Q. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48374 · Cited by 41
Rheological, Mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites
Safdari, F., Bagheriasl, D., Carreau, P. J., Heuzey, M. C., & Kamal, M. R. (2016) · Polymer Composites · doi:10.1002/pc.24127 · Cited by 40
Thermal Properties and Thermodynamics of Poly(l-lactic acid)
Pyda, M., & Czerniecka‐Kubicka, A. (2017) · Advances in polymer science · doi:10.1007/12_2017_19 · Cited by 40
Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
F42 Committee (2019) · doi:10.1520/isoastm52921-13r19 · Cited by 38
Dobreva, T., Pereña, J. M., Pérez, E., Benavente, R., & García, M. (2010) · Polymer Composites · doi:10.1002/pc.20882 · Cited by 37
UV-Initiated Ring Opening Polymerization of l -Lactide Using a Photobase Generator
Placet, E., Pinaud, J., Gimello, O., & Lacroix‐Desmazes, P. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00251 · Cited by 35
Chemical Structure of Poly(Lactic Acid)
Jiang, X., Luo, Y., Tian, X., Huang, D., Reddy, N., & Yang, Y. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch6 · Cited by 34
Peltola, H. B., Immonen, K., Johansson, L., Virkajärvi, J., & Sandquist, D. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47955 · Cited by 34
Feng, X., Yang, Z., Rostom, S., Dadmun, M., Wang, S., Wang, Q., & Xie, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.050 · Cited by 30
FTIR Nanospectroscopy Shows Molecular Structures of Plant Biominerals and Cell Walls
Zancajo, V. M. R., Lindtner, T., Eisele, M., Huber, A. J., Elbaum, R., & Kneipp, J. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.0c00271 · Cited by 29
Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion
McIlroy, C., Seppala, J. E., & Kotula, A. P. (2019) · ACS symposium series · doi:10.1021/bk-2019-1315.ch006 · Cited by 26
Opportunities for wood plastic composite products in the U.S. highway construction sector
Thompson, D. W., Hansen, E., Knowles, C., & Muszyński, L. (2010) · BioResources · doi:10.15376/biores.5.3.1336-1352 · Cited by 26
Bio-treatment of poplar via amino acid for interface control in biocomposites
Zhao, X., Li, K., Wang, Y., Tekinalp, H., Richard, A., Webb, E., & Ozcan, S. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108276 · Cited by 25
Self-citationBhagia, S., Ferreira, J., Kothari, N., Nunez, A., Liu, X., Dias, N. D. S., Suarez, D. L., Kumar, R., & Wyman, C. E. (2018) · Biotechnology and Bioengineering · doi:10.1002/bit.26582 · Cited by 21
Self-citationSolid state 13C‐NMR study of a plasticized PLA/PHB polymer blend
Baran, A., Vrábel, P., Olčák, D., & Chodák, I. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46296 · Cited by 17
Degradation of Biodegradable Polymers in Real and Simulated Composting Conditions
Kijchavengkul, T., Kale, G., & Auras, R. A. (2009) · ACS symposium series · doi:10.1021/bk-2009-1004.ch003 · Cited by 14
Recent Trends and Advances in the Biodegradation of Conventional Plastics
Kalita, N. K., Kalamdhad, A. S., & Katiyar, V. (2020) · Materials horizons · doi:10.1007/978-981-15-1251-3_17 · Cited by 14
Characterization of PLA/Lignin Biocomposites for 3D Printing
Obielodan, J. O., Vergenz, K., Aqil, D., Wu, J. K., & Ellistrem, L. J. M. (2019) · doi:10.26153/tsw/17335 · Cited by 11
Perego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
Cited by
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Self-citationMori, R. (2023) · RSC Sustainability · doi:10.1039/d2su00014h · Cited by 335
Sustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
Self-citationBikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Metadata
- Authors
- Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., Pu, Y., Ozcan, S., & Ragauskas, A. J.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 24
- Pages
- 101078
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W3166745548
- Cited by
- 337
- References
- 151
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.