Experimental investigation on EV battery cooling and heating by heat pipes
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Enhancing battery safety and thermal behaviour are critical for electric vehicles (EVs) because they affect the durability, energy storage, lifecycle, and efficiency of the battery. Prior studies of using air, liquid or phase change materials (PCM) to manage the battery thermal environment have been investigated over the last few years, but only a few take heat pipes into account. This paper aims to provide a full experimental characterisation of heat pipe battery cooling and heating covering a range of battery ‘off-normal’ conditions. Two representative battery cells and a substitute heat source ranging from 2.5 to 40 W/cell have been constructed. Results show that the proposed method is able to keep the battery surface temperature below 40 °C if the battery generates less than 10 W/cell, and helps reduce the battery temperature down to 70 °C under uncommon thermal abuse conditions (e.g. 20–40 W/cell). Additionally, the feasibility of using sintered copper-water heat pipes under sub-zero temperatures has been assessed experimentally by exposing the test rig to −15 °C/−20 °C for more than 14 h. Data indicates that the heat pipe was able to function immediately after long hours of cold exposure and that sub-zero temperature conditions had little impact on heat pipe performance. We therefore conclude that the proposed method of battery cooling and heating via heat pipes is a viable solution for EVs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
Sato, N. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00478-5 · Cited by 428
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Cited by
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Self-citationComparison of different cooling methods for lithium ion battery cells
Chen, D., Jiang, J., Kim, G.-H., Yang, C., & Pesaran, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.015 · Cited by 817
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Hu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Dai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 405
Self-citationZhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Chen, J., Kang, S., E, J., Huang, Z., Wei, K., Zhang, B., Zhu, H., Deng, Y., Zhang, F., & Liao, G. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227228 · Cited by 392
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
A comprehensive review on heat pipe based battery thermal management systems
Weragoda, D. M., Tian, G., Burkitbayev, A., Lo, K.-H., & Zhang, T. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120070 · Cited by 330
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
A comprehensive review of future thermal management systems for battery-electrified vehicles
Jaguemont, J., & Van Mierlo, J. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101551 · Cited by 304
Battery thermal management system for electric vehicle using heat pipes
Smith, J., Singh, R., Hinterberger, M., & Mochizuki, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.08.022 · Cited by 303
A comprehensive review on thermal management systems for power lithium-ion batteries
Zichen, W., & Changqing, D. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110685 · Cited by 294
Thakur, A. K., Prabakaran, R., Elkadeem, M. R., Sharshir, S. W., Arıcı, M., Wang, C., Zhao, W., Hwang, J.-Y., & Saidur, R. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101771 · Cited by 287
Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries
Patel, J. R., & Rathod, M. K. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228820 · Cited by 276
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Strategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification
Kong, L., Li, Y., & Feng, W. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-021-00109-3 · Cited by 265
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Shao, D., Hu, L., Zhang, J., Hu, R., Zhang, G., Jiang, L., Wang, X., & Wen, Y. (2024) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2024.100817 · Cited by 30
Metadata
- Authors
- Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2015-09
- Volume
- 88
- Pages
- 54-60
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W1981753001
- Cited by
- 329
- References
- 16
- FWCI
- 12.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.