The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Nano-PCMs for enhanced energy storage and passive cooling applications
Abstract
It is well known that the heat transfer associated with a phase change process is much higher than sensible enthalpy change even in forced convection. In particular, the vaporization process has been widely studied because it exploits the highest heat transfer coefficient; this heat transfer mechanism is used in both passive (i.e. heat pipes) and active (i.e. refrigerating machines) cooling devices. However, the solid-liquid phase change process is another interesting possibility to reject even high heat loads, especially when they are intermittent. The term Phase Change Materials (PCMs) commonly refers to those materials, which use the solid-liquid phase change process to adsorb and then release heat loads (Mancin et al., 2015). The present work aims at investigating the feasibility of a new challenging use of Aluminum Oxide (Al 2 O 3 ) and Carbon Black (CB) nanoparticles to enhance the thermal properties: thermal conductivity, specific heat, and latent heat of pure paraffin waxes to obtain a new class of PCMs, the so-called nano-PCMs. The nano-PCMs were obtained by seeding 1 wt% of nanoparticles in paraffin waxes with melting temperatures of 20 °C and 25 °C. The thermophysical properties were then measured to understand the effects of the nanoparticles on the thermal properties of both the solid and liquid PCM. These new nano-PCMs can represent a feasible and interesting way to mitigate or eliminate the intrinsic limitations in the use of paraffin waxes as PCMs for both energy storage and passive cooling applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Soares, N., Costa, J. J., Gaspar, A. R., & Santos, P. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.12.042 · Cited by 1,061
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., & Kenny, J. M. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-448 · Cited by 381
Cited by
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
A review of performance of zero energy buildings and energy efficiency solutions
Belussi, L., Barozzi, B., Bellazzi, A., Danza, L., Devitofrancesco, A., Fanciulli, C., Ghellere, M., Guazzi, G., Meroni, I., Salamone, F., et al. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100772 · Cited by 468
Self-citationAdvances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Tariq, S. L., Ali, H. M., Akram, M. A., Janjua, M. M., & Ahmadlouydarab, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115305 · Cited by 405
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Metadata
- Authors
- Colla, L., Fedele, L., Mancin, S., Danza, L., & Manca, O.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 110
- Pages
- 584-589
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2314529780
- Cited by
- 283
- References
- 20
- FWCI
- 15.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nano-PCMs for enhanced energy storage and passive cooling applications. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2016.03.161
- The paper
- Colla, L., Fedele, L., Mancin, S., Danza, L., & Manca, O. (2017). Nano-PCMs for enhanced energy storage and passive cooling applications. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2016.03.161
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.