The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Some pin fins were experimentally and numerically investigated by Yang et al. [125] for microchannel heat sinks including five pin shapes: triangle, square, pentagon, hexagon, and circle. The circular pins showed the least pressure drop while triangular ones showed the highest flow blocking.”
From Compact and microchannel heat exchangers: A comprehensive review of air-side friction factor and heat transfer correlations (2018) · cites this paper as [125]
Citations
Cites
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Single-phase convective heat transfer in microchannels: a review of experimental results
Morini, G. L. (2004) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2004.01.003 · Cited by 679
Cooling performance of a microchannel heat sink with nanofluids
Jang, S. P., & Choi, S. U. S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.02.036 · Cited by 462
Numerical study of the inlet/outlet arrangement effect on microchannel heat sink performance
Chein, R., & Chen, J. (2009) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2008.12.019 · Cited by 267
Optimization of short micro pin fins in minichannels
Tullius, J. F., Tullius, T. K., & Bayazıtoğlu, Y. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.03.022 · Cited by 255
Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy Walls
Gong, L., Kota, K. M., Tao, W., & Joshi, Y. K. (2011) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4003284 · Cited by 218
Abdoli, A., Jimenez, G., & Dulikravich, G. S. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.12.021 · Cited by 185
A Review of Cooling in Microchannels
Tullius, J. F., Vajtai, R., & Bayazıtoğlu, Y. (2010) · Heat Transfer Engineering · doi:10.1080/01457632.2010.506390 · Cited by 182
Seyf, H. R., Zhou, Z., Ma, H. B., & Zhang, Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.08.052 · Cited by 160
Seyf, H., & Feizbakhshi, M. (2012) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2012.02.018 · Cited by 151
Cited by
He, Z., Yan, Y., & Zhang, Z. (2021) · Energy · doi:10.1016/j.energy.2020.119223 · Cited by 869
Thermal performance of open microchannel heat sink with variable pin fin height
Bhandari, P., & Prajapati, Y. K. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106609 · Cited by 295
Advances in micro milling: From tool fabrication to process outcomes
Chen, N., Li, H., Wu, J., Li, Z., Li, L., Liu, G., & He, N. (2020) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2020.103670 · Cited by 289
Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review
Alihosseini, Y., Targhi, M. Z., Heyhat, M. M., & Ghorbani, N. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.114974 · Cited by 214
Bhandari, P., Rawat, K. S., Prajapati, Y. K., Padalia, D., Ranakoti, L., & Singh, T. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107548 · Cited by 214
Latest Advancements in Heat Transfer Enhancement in the Micro-channel Heat Sinks: A Review
Ramesh, K. N., Sharma, T. K., & Rao, G. A. P. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09495-1 · Cited by 202
An overview of heat transfer enhancement methods in microchannel heat sinks
Du, L., & Hu, W. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119081 · Cited by 201
Hotspot thermal management using a microchannel-pinfin hybrid heat sink
Ansari, D., & Kim, K. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.07.043 · Cited by 193
Prajapati, Y. K. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.012 · Cited by 183
Polat, M. E., Ulger, F., & Çadırcı, S. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.107432 · Cited by 139
Qasem, N. A. A., & Zubair, S. M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.104 · Cited by 134
Study on the flow and heat transfer characteristics of pin-fin manifold microchannel heat sink
Pan, Y.-H., Zhao, R. J., Nian, Y., & Cheng, W.-L. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122052 · Cited by 134
Thermal management enhancement of electronic chips based on novel technologies
Chen, H., Zhang, T., Gao, Q., Lv, J., Chen, H., & Huang, H. (2025) · Energy · doi:10.1016/j.energy.2025.134575 · Cited by 131
Zhou, F., Zhou, W., Zhang, C., Qiu, Q., Yuan, D., & Chu, X. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115296 · Cited by 124
A gyroid TPMS heat sink for electronic cooling
Ansari, D., & Duwig, C. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118918 · Cited by 108
Heat transfer optimization based on finned microchannel heat sink
Zhang, F., Wu, B., & Du, B. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.107357 · Cited by 106
Advances in Liquid Metal Science and Technology in Chip Cooling and Thermal Management
Yang, X., & Liu, J. (2018) · Advances in heat transfer · doi:10.1016/bs.aiht.2018.07.002 · Cited by 100
A review of flow and heat transfer behaviour of nanofluids in micro channel heat sinks
Kumar, S., Kumar, A., Kothiyal, A. D., & Bisht, M. S. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.10.004 · Cited by 100
Mohammadi, A., & Koşar, A. (2018) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2018.1475525 · Cited by 93
Polat, M. E., & Çadırcı, S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123015 · Cited by 84
Li, C., Li, X., Huang, H., & Zheng, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120167 · Cited by 82
Research progress of the liquid cold plate cooling technology for server electronic chips: A review
Zhou, W., Dong, K., Sun, Q. F., Luo, W., Zhang, B., Guan, S., & Wang, G. (2022) · International Journal of Energy Research · doi:10.1002/er.7979 · Cited by 81
Self-citationEffects of splitter shape on thermal-hydraulic characteristics of plate-pin-fin heat sink (PPFHS)
Hosseinirad, E., Khoshvaght-Aliabadi, M., & Hormozi, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118586 · Cited by 78
Lan, Y., Feng, Z., Huang, K., Zhang, J., & Hu, Z. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105258 · Cited by 77
Thermo-hydraulic investigation of open micro prism pin fin heat sink having varying prism sides
Bhandari, P., Padalia, D., Ranakoti, L., Khargotra, R., Kovács, A., & Singh, T. (2023) · Alexandria Engineering Journal · doi:10.1016/j.aej.2023.02.016 · Cited by 75
Vaferi, K., Vajdi, M., Nekahi, S., Heydari, A., Moghanlou, F. S., Nami, H., & Jafarzadeh, H. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e21031 · Cited by 73
Ma, C., Sun, Y., Wu, Y., Zhang, Q., Wang, Y., & Ding, G. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123717 · Cited by 70
Self-citationLiu, L., Cao, Z., Xu, C., Zhang, L., & Sun, T. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122535 · Cited by 67
Bhandari, P., & Prajapati, Y. K. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107714 · Cited by 66
Moradikazerouni, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104097 · Cited by 65
A novel microchannel-twisted pinfin hybrid heat sink for hotspot mitigation
Raza, W., Ansari, D., Jeong, J. H., Samad, A., & Duwig, C. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122454 · Cited by 62
A novel composite pinfin heat sink for hotspot mitigation
Ansari, D., & Jeong, J. H. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119843 · Cited by 60
Fractal channel manifolds for microjet liquid-cooled heat sinks
Paniagua-Guerra, L. E., Sehgal, S., Gonzalez-Valle, C. U., & Ramos-Alvarado, B. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.039 · Cited by 58
Liao, W.-R., Chien, L., Ghalambaz, M., & Yan, W. (2019) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2019.104277 · Cited by 58
Ma, D., Xia, G., Wang, J., Yang, Y. C., Jia, Y., & Zong, L. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.052 · Cited by 57
Li, B., Cui, Y., Li, G., & Jiang, H. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122165 · Cited by 53
Ma, D., Xia, G., Wang, W., Jia, Y., & Yang, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113764 · Cited by 53
Cheng, Y., Luo, X., Wang, P., Yang, Z., Huang, J., Gu, J., & Zhao, W. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117748 · Cited by 53
Shape optimization of hotspot targeted micro pin fins for heterogeneous integration applications
Fallahtafti, N., Rangarajan, S., Hadad, Y., Arvin, C., Sikka, K. K., Hoang, C. H., Mohsenian, G., Radmard, V., Schiffres, S. N., & Sammakia, B. G. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122897 · Cited by 52
Sallar, H., Irfan, M., Khan, M. M., & Shahzad, M. W. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.108256 · Cited by 50
Hamidnia, M., Luo, Y., Li, Z., & Wang, X. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119581 · Cited by 50
Saha, S. K., & Khan, A. H. (2020) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2020.100711 · Cited by 50
Zheng, R., Wu, Y., Li, Y., Wang, G., Ding, G., & Sun, Y. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121925 · Cited by 50
Self-citationChen, Z., Feng, Z., Zhang, Q., Zhang, J., & Guo, F. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122583 · Cited by 50
A novel hybrid-composite microchannel heat sink for extreme hotspot mitigation
Ansari, D., Raza, W., Jeong, J. H., & Kim, K. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109473 · Cited by 47
Raihan, M. F. B., Al-Asadi, M. T., & Thompson, H. M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116097 · Cited by 46
Harris, M., Wu, H., Angelopoulou, A., Zhang, W., Hu, Z., & Xie, Y. (2024) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2024.102606 · Cited by 44
Performance analysis of microchannel heat sink with ribbed pinfins
Alam, M., Khan, M. N., Ansari, D., Rasheed, K., Bharti, P. K., & Dwivedi, A. (2024) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2024.109529 · Cited by 43
Hadad, Y., Rangarajan, S., Nemati, K., Ramakrishnan, B., Pejman, R., Chiarot, P. R., & Sammakia, B. G. (2019) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.106145 · Cited by 42
Hou, F., Zhang, H., Huang, D., Fan, J., Liu, F., Lin, T., Cao, L., Fan, X., Ferreira, J. A., & Zhang, G. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2985117 · Cited by 42
Miao, Y., Zhang, T., Xu, X., Yang, S., Chen, H., & Huang, H. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127697 · Cited by 41
Hotspot management using a hybrid heat sink with stepped pin-fins
Ansari, D., & Kim, K. (2019) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2019.1599272 · Cited by 41
Kumar, A., Nath, S., & Bhanja, D. (2018) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2018.1448611 · Cited by 40
Li, Y., Wang, T., Wang, Z., Yang, J., Cao, W., & Ma, X. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122443 · Cited by 39
Wu, A., Cheng, Q., & Wang, H. (2025) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2025.109758 · Cited by 39
Jaffal, H. M., Freegah, B., Al‐Taee, A. A. H., & Hasan, A. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100866 · Cited by 39
Ao, C., Zhou, N., Xu, B., & Chen, Z. (2025) · Energy · doi:10.1016/j.energy.2025.137392 · Cited by 38
Local hotspot thermal management using metal foam integrated heat sink
Tikadar, A., & Kumar, S. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119632 · Cited by 38
Kambli, A., & Dey, P. (2023) · Heat and Mass Transfer · doi:10.1007/s00231-023-03358-8 · Cited by 36
Performance of high-concentration photovoltaic cells cooled by a hybrid microchannel heat sink
Alihosseini, Y., Oghabneshin, Y., Bari, A. R., Moslemi, S., Roozbehi, A. R., Targhi, M. Z., & Guo, W. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122206 · Cited by 35
Effects of piezoelectric fan on overall performance of air-based micro pin-fin heat sink
Li, X.-J., Zhang, J., & Tan, X. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.018 · Cited by 35
Experimental evaluation of a compact two-phase cooling system for high heat flux electronic packages
Hou, F., Wang, W., Zhang, H., Chen, C., Chen, C., Lin, T., Cao, L., Zhang, G. Q., & Ferreira, J. A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114338 · Cited by 35
Zhao, C., Wang, G., Deng, H., & Wang, Y. (2025) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2025.110079 · Cited by 34
Self-citationMulti-parameter optimization for micro-channel heat sink under different constraint conditions
Ma, D., Xia, G., Jia, Y., Li, Y. F., & Wang, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.123 · Cited by 34
Experimental study of heat transfer performance of a tube with different shaped pin fins
Huang, L., Li, Q., & Zhai, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.014 · Cited by 33
González, A., Ruz, Ó., & Castillo, E. F. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101635 · Cited by 33
Elahi, K. M., Chowdhury, N. M., Haque, M. R., Rashid, M. M., Hossain, M. M., & Sadi, T. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105088 · Cited by 32
Experimental investigation of heat transfer in pin-fins heat sinks for cooling applications
Alnaimat, F., & Ziauddin, M. (2020) · Heat and Mass Transfer · doi:10.1007/s00231-020-02947-1 · Cited by 32
Microchannel Heat Sinks—A Comprehensive Review
Ghani, U., Wazir, M. A., Akhtar, K., Wajib, M., & Shaukat, S. (2024) · Electronic Materials · doi:10.3390/electronicmat5040017 · Cited by 31
Li, C., Zheng, Y., Huang, H., Zhang, W., Hu, Y.-C., & Shang, Y. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109562 · Cited by 31
Performance optimisation of microchannel pin-fins using 2D CFD
Jaseliūnaitė, J., & Šeporaitis, M. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118040 · Cited by 31
Daadoua, M., Mathew, B., & Alnaimat, F. (2023) · International Journal of Thermofluids · doi:10.1016/j.ijft.2023.100542 · Cited by 31
Wang, Z., Zheng, S., Xu, S., & Dai, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122178 · Cited by 29
Hydraulic and thermal performances of micro pin fin heat sink with increasing pin fin height
Li, H., & Jing, D. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.103912 · Cited by 29
Ansari, D., & Jeong, J. H. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115519 · Cited by 29
Keshavarz, F., Lavasani, A. M., & Bayat, H. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7711-z · Cited by 29
Prospects of hybrid cooling technologies for thermal management of electronic gadgets: A review
Nandan, R., Arumuru, V., & Das, M. K. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127766 · Cited by 28
Jahanbakhshi, A., Nadooshan, A. A., & Bayareh, M. (2022) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2022.04.004 · Cited by 28
Rasangika, A. H. D. K., Nasif, M. S., & Al‐Waked, R. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102332 · Cited by 28
Experimental investigation of heat transfer from different pin fin in a rectangular channel
Çalışkan, S., Doğan, A., & Kotçioğlu, İ. (2018) · Experimental Heat Transfer · doi:10.1080/08916152.2018.1526228 · Cited by 28
Qin, L., Hua, J., Zhao, X., Zhu, Y., Li, D., & Liu, Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114186 · Cited by 28
Hydraulic and Thermal Performance of Microchannel Heat Sink Inserted with Pin Fins
Xie, G., Zhao, L., Dong, Y., Li, Y., Zhang, S., & Yang, C. (2021) · Micromachines · doi:10.3390/mi12030245 · Cited by 27
Bari, A. R., Targhi, M. Z., & Heyhat, M. M. (2023) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/hff-10-2022-0608 · Cited by 27
Conjugate study on heat transfer enhancement of a TPMS-based hybrid heat sink design
Shen, J., Zhang, Q., & Wang, Z. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124350 · Cited by 26
Numerical study of variable density and height flow guided pin fin in an open microchannel heat sink
Shi, Z., Lan, X., Cao, J., Zhao, N., & Cheng, Y. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.125405 · Cited by 25
Thermo-hydraulic performance evaluation of a novel design recharging microchannel
Samal, S. K., & Moharana, M. K. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.09.006 · Cited by 24
Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins
Xie, H. T., Yang, B., Zhang, S., & Song, M. (2020) · International Journal of Energy Research · doi:10.1002/er.5135 · Cited by 24
Composite pin‐fin heat sink for effective hotspot reduction
Khan, M. A., Ali, H. M., Rehman, T., Arsalanloo, A., & Niyas, H. (2024) · Heat Transfer · doi:10.1002/htj.23016 · Cited by 23
Abdo, A., Saitō, T., Ookawara, S. A., Radwan, A., & Ahmed, M. A. (2021) · International Journal of Energy Research · doi:10.1002/er.6359 · Cited by 23
Castillo, E. F., Santos, A., & González, A. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104328 · Cited by 22
Failure analysis on the pin fin heat sink for the power module of new energy vehicles
Chen, J., Gong, Y., & Yang, Z. (2022) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2022.106870 · Cited by 21
A parametric study of laminar convective heat transfer in fractal minichannels with hexagonal fins
Yang, X., Wei, L., Cao, F., Zhang, L., Zhao, L., Meng, X., & Jin, L. (2019) · International Journal of Energy Research · doi:10.1002/er.4942 · Cited by 21
Heat sinks with minichannels and flow distributors based on constructal law
Arriaga, E. M. N., Hernández-Guerrero, A., Luviano‐Ortiz, J. L., & Bejan, A. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105122 · Cited by 20
Li, Y., Wang, T., Wang, Z., Zhu, C., Yang, J., & Yang, B. (2024) · Energies · doi:10.3390/en17215301 · Cited by 19
Kim, C., Lee, M., & Park, C. Y. (2018) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-018-0249-y · Cited by 19
Microfluidic silicon interposer for thermal management of GaN device integration
Yu, M., Zhang, H., Huang, M., Zhang, H., & Zhu, J. F. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120681 · Cited by 18
Wang, D., Xue, L., Liu, C., Chen, H., Xia, C., Qian, Q., & Cheng, L. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105597 · Cited by 18
A Review on the Role of Microflow Parameter Measurements for Microfluidics Applications
Kotreshappa, S. L., Nayak, C. G., & Venkata, S. K. (2023) · Systems · doi:10.3390/systems11030113 · Cited by 18
Madi, K., Raafat, A., & Alnuaimi, S. K. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101283 · Cited by 17
Sukhor, N. B., Tijani, A. S., Kubenthiran, J., & Muritala, I. K. (2021) · International Journal of Green Energy · doi:10.1080/15435075.2021.1890086 · Cited by 17
Metadata
- Authors
- Yang, D., Wang, Y., Ding, G., Jin, Z., Zhao, J., & Wang, G.
- Affiliations
- Shanghai Jiao Tong University (CN)
- Corresponding author
- Wang, Yan
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 112
- Pages
- 1547-1556
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2511432550
- Cited by
- 235
- References
- 19
- Citations by year
- 2026: 28 · 2025: 38 · 2024: 39 · 2023: 32 · 2022: 22 · 2021: 22 · 2020: 18 · 2019: 17 · 2018: 13 · 2017: 6
- FWCI
- 10.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Applied Thermal Engineering (publishedVersion)
- Funders
- National Natural Science Foundation of China (51305265)
- Major State Basic Research Development Program of China (613204)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Boiling Studies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer Mechanisms
- Keywords
- microchannel heat sinks, heat transfer enhancement, pressure drop, thermal resistance, single-phase cooling, deionized water coolant, staggered pin fins
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.