The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery
Open accessAbstract
Abstract This paper has presented a comparative study of the temperature and velocity distributions within the mini-channel cold plates placed on a prismatic lithium-ion battery cell using experimental and numerical techniques. The study was conducted for water cooling methods at 1C and 2C discharge rates and different operating temperatures of 5 °C, 15 °C, and 25 °C. A total of nineteen thermocouples were used for this experimental work, and were purposefully placed at different locations. Out of nineteen, ten T-type thermocouples were placed on the principal surface of the battery, and four K-type thermocouples were used to measure water inlet and outlet temperature. Computationally, the k-e model in ANSYS Fluent was used to simulate the flow in a mini-channel cold plate, and the data was validated with the experimental data for temperature profiles. The present results show that increased discharge rates and increased operating temperature results in increased temperature of the cold plates. Furthermore, the thermocouple sensors nearest the electrodes (anode and cathode) measured the higher temperatures than the sensors located at the center of the battery surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
(2019) · 2019 International Conference "Quality Management, Transport and Information Security, Information Technologies" (IT&QM&IS) · doi:10.1109/itqmis.2019.8928339 · Cited by 954
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Viscosity and Thermal Conductivity Equations for Nitrogen, Oxygen, Argon, and Air
Lemmon, E. W., & Jacobsen, R. T. (2004) · International Journal of Thermophysics · doi:10.1023/b:ijot.0000022327.04529.f3 · Cited by 776
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
Cited by
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Metadata
- Authors
- Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 122
- Pages
- 80-90
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2611079843
- Cited by
- 397
- References
- 41
- FWCI
- 18.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2017.05.010
- The paper
- Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017). Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2017.05.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.