The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery
Open accessAbstract
This paper has presented a comparative study of the temperature and velocity distributions within the mini-channel cold plates placed on a prismatic lithium-ion battery cell using experimental and numerical techniques. The study was conducted for water cooling methods at 1C and 2C discharge rates and different operating temperatures of 5 °C, 15 °C, and 25 °C. A total of nineteen thermocouples were used for this experimental work, and were purposefully placed at different locations. Out of nineteen, ten T-type thermocouples were placed on the principal surface of the battery, and four K-type thermocouples were used to measure water inlet and outlet temperature. Computationally, the k-e model in ANSYS Fluent was used to simulate the flow in a mini-channel cold plate, and the data was validated with the experimental data for temperature profiles. The present results show that increased discharge rates and increased operating temperature results in increased temperature of the cold plates. Furthermore, the thermocouple sensors nearest the electrodes (anode and cathode) measured the higher temperatures than the sensors located at the center of the battery surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
(2019) · 2019 International Conference "Quality Management, Transport and Information Security, Information Technologies" (IT&QM&IS) · doi:10.1109/itqmis.2019.8928339 · Cited by 954
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Viscosity and Thermal Conductivity Equations for Nitrogen, Oxygen, Argon, and Air
Lemmon, E. W., & Jacobsen, R. T. (2004) · International Journal of Thermophysics · doi:10.1023/b:ijot.0000022327.04529.f3 · Cited by 776
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Park, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.102 · Cited by 497
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486 · cited 1×
“In addition, the temperature, which is an important factor, affects several aspects of a lithium-ion battery, including the thermal and electrochemical behaviors, and ultimately performance and the cycle life cost [17, 18, 19].”
BackgroundZhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Thermal Modeling of the Lithium/Polymer Battery: I . Discharge Behavior of a Single Cell
Pals, C. R., & Newman, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2049974 · Cited by 315
Recent developments and likely advances in lithium-ion batteries
Ritchie, A. G., & HOWARD, W. F. J. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.014 · Cited by 309
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Self-citationLin, C., Xu, S., Chang, G., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.068 · Cited by 263
Giuliano, M. R., Prasad, A. K., & Advani, S. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.074 · Cited by 194
Chen, Y., & Evans, J. W. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059263 · Cited by 177
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.03.005 · Cited by 173
Self-citationSolid-State Thermal Management for Lithium-Ion EV Batteries
Alaoui, C. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2214246 · Cited by 166
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 165
Experimental study of an OHP-cooled thermal management system for electric vehicle power battery
Rao, Z., Huo, Y., & Liu, X. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.03.017 · Cited by 162
Advanced lithium ion battery charger
Teofilo, V. L., Merritt, L., & Hollandsworth, R. P. (1997) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/62.636803 · Cited by 158
Ge, H., Huang, J., Zhang, J., & Li, Z. Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0961602jes · Cited by 152
Panchal, S., Dinçer, İ., Agelin‐Chaab, M., Fraser, R., & Fowler, M. W. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.08.016 · Cited by 150
Self-citationThermal Performance of EV and HEV Battery Modules and Packs
Pesaran, A. A., & Burch, S. D. (1997) · Cited by 121
Development of an Advanced Two-Dimensional Thermal Model for Large size Lithium-ion Pouch Cells
Samba, A., Omar, N., Gualous, H., Firouz, Y., den Bossche, P. V., Mierlo, J. V., & Tala-Ighil, B. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.113 · Cited by 118
Thermal analysis and management of lithium–titanate batteries
Giuliano, M. R., Advani, S. G., & Prasad, A. K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.099 · Cited by 115
Heat transfer in the dynamic cycling of lithium–titanate batteries
Wang, Q., Sun, Q., Ping, P., et al. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.11.007 · Cited by 86
Yeow, K. F., Teng, H., Thelliez, M., et al. (2012) · SAE International journal of alternative powertrains · doi:10.4271/2012-01-0331 · Cited by 69
Thermal Management in Hybrid Power Systems Using Cylindrical and Prismatic Battery Cells
He, F., & Ma, L. (2015) · Heat Transfer Engineering · doi:10.1080/01457632.2015.1060776 · Cited by 65
Temperature response of a high power lithium-ion battery subjected to high current discharge
Wang, C., Lin, T., Huang, J., & Rao, Z. (2015) · Materials Research Innovations · doi:10.1179/1432891715z.0000000001318 · Cited by 41
Prognostics and health monitoring for lithium-ion battery
Xing, Y., Miao, Q., Tsui, K., & PECHT, M. G. (2011) · IEEE International Conference on Intelligence and Security Informatics (ISI) · doi:10.1109/isi.2011.5984090 · Cited by 39
Industrial lithium ion battery safety - What are the tradeoffs?
McDowall, J., Biensan, P., & Broussely, M. (2007) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.2007.4448871 · Cited by 36
Aerodynamic and thermal analysis of a heat source at the underside of a passenger vehicle
Khasow, R. (2014) · e-scholar@UOIT (University of Ontario Institute of Technology) · Cited by 1
Self-citation
Cited by
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Metadata
- Authors
- Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 122
- Pages
- 80-90
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2611079843
- Cited by
- 397
- References
- 41
- FWCI
- 18.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.