The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review
Abstract
As the power lithium-ion batteries are applied to provide energy for electric vehicles, higher requirements for battery thermal management system (BTMS) have been put forward. The operating temperature, reliability, safety and cycle life of batteries is the key points that people concern. The liquid cooling system is considered as an efficient cooling method, which can control the maximum temperature of the battery and the temperature difference between the batteries in a reasonable range to prolong the cycle life of the battery. This review summarizes the latest research papers of battery liquid cooling system from three aspects, including the performance of coolant, classification of liquid cooling system and design of battery pack. In terms of coolants, the properties and applications of different liquids such as water and oil, as well as different additives such as nanoparticles, are compared. For the classification of liquid cooling system, the difference between active and passive cooling, internal and external cooling, direct and indirect cooling are introduced. As for the design of battery pack, the series, parallel and series-parallel configurations are introduced and the advantages and disadvantages of the different configurations are analyzed. The differences in the design scheme between direct and indirect cooling system are compared. The influences on the cooling performance of battery pack with different parameter design of the cooling plate and the cooling jacket of indirect cooling system are discussed in depth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhancing Thermal Conductivity of Fluids With Nanoparticles
Choi, S. U. S. (1995) · Developments and Applications of Non-Newtonian Flows · doi:10.1115/imece1995-0926 · Cited by 9,324
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
He, Y., Jin, Y., Chen, H., Ding, Y., Cang, D., & Lu, H. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.10.024 · Cited by 918
Comparison of different cooling methods for lithium ion battery cells
Chen, D., Jiang, J., Kim, G.-H., Yang, C., & Pesaran, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.015 · Cited by 817
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling
Qian, Z., Li, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.063 · Cited by 626
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Rao, Z., Qian, Z., Kuang, Y., & Li, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.059 · Cited by 535
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method
Liu, M.-S., Lin, M. C.-C., Tsai, C. Y., & Wang, C.-C. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.02.012 · Cited by 433
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Zhao, X., Zuo, W., Wang, H., Chen, J., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.115 · Cited by 404
Self-citationPanchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Zinth, V., von Lüders, C., Hofmann, M., Hattendorff, J., Buchberger, I., Erhard, S., Rebelo-Kornmeier, J., Jossen, A., & Gilles, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.168 · Cited by 361
Recycling rechargeable lithium ion batteries: Critical analysis of natural resource savings
Dewulf, J., Van der Vorst, G., Denturck, K., Van Langenhove, H., Ghyoot, W., Tytgat, J., & Vandeputte, K. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.08.004 · Cited by 348
Thermal management for high power lithium-ion battery by minichannel aluminum tubes
Lan, C., Xu, J., Qiao, Y., & Ma, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.070 · Cited by 336
Das, P. K. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.05.071 · Cited by 325
von Lüders, C., Zinth, V., Erhard, S. V., Osswald, P. J., Hofmann, M., Gilles, R., & Jossen, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.032 · Cited by 311
E, J., Pham, M., Zhao, D., Deng, Y., Le, D., Zuo, W., Zhu, H., Liu, T., Peng, Q., & Zhang, Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.250 · Cited by 311
Self-citationPrevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J., Lan, C., Qiao, Y., & Ma, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 308
Bai, F., Chen, M., Song, W., Feng, Z., Li, Y., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.141 · Cited by 303
Thermal management of Li-ion battery with liquid metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.054 · Cited by 285
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Battery thermal management by boiling heat-transfer
van Gils, R. W., Danilov, D., Notten, P. H. L., Speetjens, M. F. M., & Nijmeijer, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.006 · Cited by 266
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.05.126 · Cited by 261
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Alipanah, M., & Li, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.010 · Cited by 257
Development of cooling strategy for an air cooled lithium-ion battery pack
Sun, H., & Dixon, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.107 · Cited by 249
Influence of operating conditions on the optimum design of electric vehicle battery cooling plates
Jarrett, A., & Kim, I. Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.114 · Cited by 245
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Lai, Y., Du, S., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.079 · Cited by 234
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Hussain, A., Tso, C. Y., & Chao, C. Y. H. (2016) · Energy · doi:10.1016/j.energy.2016.09.008 · Cited by 227
Malik, M., Dinçer, İ., Rosen, M. A., Mathew, M., & Fowler, M. W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.029 · Cited by 221
Heat generation in lithium-ion batteries with different nominal capacities and chemistries
Nazari, A., & Farhad, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.126 · Cited by 209
An, Z., Jia, L., Li, X., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.053 · Cited by 208
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Karimi, G., Azizi, M., & Babapoor, A. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.08.005 · Cited by 202
Liquid cooling based on thermal silica plate for battery thermal management system
Wang, C., Zhang, G., Meng, L., Li, X., Situ, W., Lv, Y., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3801 · Cited by 202
Zakaria, I., Azmi, W. H., Mohamed, W. A. N. W., Mamat, R., & Najafi, G. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.12.015 · Cited by 195
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Self-citationZhang, T., Gao, Q., Wang, G., Gu, Y., Wang, Y., Bao, W., & Zhang, D. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.01.069 · Cited by 184
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Huo, Y., & Rao, Z. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.128 · Cited by 167
Zhang, B., Jiaqiang, E., Gong, J., Yuan, W., Zuo, W., Yu, L., & Fu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.051 · Cited by 166
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 165
Numerical investigation of water cooling for a lithium-ion bipolar battery pack
Tong, W., Somasundaram, K., Birgersson, E., Mujumdar, A. S., & Yap, C. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.03.005 · Cited by 158
Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells
Shah, K., Chalise, D., & Jain, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.133 · Cited by 155
Exploring the efficacy of nanofluids for lithium-ion battery thermal management
Mondal, B., Lopez, C. F., & Mukherjee, P. P. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.130 · Cited by 148
Temperature-dependent electrochemical heat generation in a commercial lithium-ion battery
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.015 · Cited by 146
Three-dimensional thermal modeling of a lithium-ion battery pack
Sun, H., Wang, X., Tossan, B., & Dixon, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.081 · Cited by 146
Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions
Ping, P., Wang, Q., Chung, Y. M., & Wen, J. X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.073 · Cited by 140
One-dimensional physics-based reduced-order model of lithium-ion dynamics
Lee, J. L., Chemistruck, A., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.075 · Cited by 133
Nanofluid-based cooling of cylindrical lithium-ion battery packs employing forced air flow
Sefidan, A. M., Sojoudi, A., & Saha, S. C. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.03.006 · Cited by 133
Jalkanen, K., Aho, T., & Vuorilehto, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.199 · Cited by 132
Deng, Y., Liu, H., Zhao, X., Jiaqiang, E., & Chen, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.093 · Cited by 132
Self-citationWorwood, D., Kellner, Q., Wojtala, M., Widanage, W. D., McGlen, R. J., Greenwood, D. G., & Marco, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.023 · Cited by 129
Thermal management of lithium-ion battery pack with liquid cooling
Saw, L. H., Tay, A. A. O., & Zhang, L. W. (2015) · Annual IEEE Semiconductor Thermal Measurement and Management Symposium/Proceedings · doi:10.1109/semi-therm.2015.7100176 · Cited by 128
Liu, T., Jiaqiang, E., Yang, W., An, H., & Cai, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.090 · Cited by 119
Research and development of electric vehicles for clean transportation
Wada, M. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)62335-9 · Cited by 119
Thermal characterization of large size lithium-ion pouch cell based on 1d electro-thermal model
Vertiz, G., Oyarbide, M., Macicior, H., Miguel, O., Cantero, I., Arroiabe, P. F., & Ulacia, I. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.092 · Cited by 118
Development of an Advanced Two-Dimensional Thermal Model for Large size Lithium-ion Pouch Cells
Samba, A., Omar, N., Gualous, H., Firouz, Y., den Bossche, P. V., Mierlo, J. V., & Tala-Ighil, B. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.113 · Cited by 118
Thermal analysis of high-power lithium-ion battery packs using flow network approach
Karimi, G., & Dehghan, A. R. (2014) · International Journal of Energy Research · doi:10.1002/er.3173 · Cited by 118
Jiaqiang, E., Zuo, W., Gao, J., Peng, Q., Zhang, Z., & Hieu, P. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.031 · Cited by 117
Thermal analysis and simulation of a Li-ion battery pack for a lightweight commercial EV
Cicconi, P., Landi, D., & Germani, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.008 · Cited by 114
Investigation on a hydrogel based passive thermal management system for lithium ion batteries
Zhang, S., Zhao, R. L., Liu, J., & Gu, J. (2014) · Energy · doi:10.1016/j.energy.2014.03.012 · Cited by 111
Boiling Liquid Battery Cooling for Electric Vehicle
Hirano, H., Tajima, T., Hasegawa, T., SEKIGUCHI, T., & Uchino, M. (2014) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2014.6940931 · Cited by 111
Wang, S., Li, Y., Li, Y., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.159 · Cited by 106
Vita, A. D., Maheshwari, A., Destro, M., Santarelli, M., & Carello, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.184 · Cited by 106
An experimental study of lithium ion battery thermal management using flexible hydrogel films
Zhao, R. L., Zhang, S., Gu, J., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.138 · Cited by 101
Effects of channel shape on the cooling performance of hybrid micro-channel and slot-jet module
Zhang, Y., Wang, S., & Ding, P. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.092 · Cited by 101
Battery Thermal Management Design Modeling
Kim, G., & Pesaran, A. (2007) · World Electric Vehicle Journal · doi:10.3390/wevj1010126 · Cited by 100
Bahiraei, F., Fartaj, A., & Nazri, G. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.09.084 · Cited by 98
Wang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
Jiaqiang, E., Liu, T., Yang, W., Deng, Y., & Gong, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.090 · Cited by 91
Self-citationSchmidt, J. P., Weber, A., & Ivers‐Tiffée, E. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.05.153 · Cited by 89
Wei, Z., Zhao, J., Skyllas‐Kazacos, M., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.108 · Cited by 88
Local Heat Generation in a Single Stack Lithium Ion Battery Cell
Heubner, C., Schneider, M., Lämmel, C., & Michaelis, A. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.10.182 · Cited by 74
Murashko, K., Pyrhonen, J. J., & Laurila, L. I. E. (2013) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2013.2255291 · Cited by 70
Chen, K., & Li, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.060 · Cited by 70
Wang, H., He, F., & Ma, L. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.041 · Cited by 70
Yeow, K. F., Teng, H., Thelliez, M., et al. (2012) · SAE International journal of alternative powertrains · doi:10.4271/2012-01-0331 · Cited by 69
Analysis of performances of a manifold microchannel heat sink with nanofluids
Yue, Y., Mohammadian, S. K., & Zhang, Y. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.11.016 · Cited by 62
Practical Considerations Relating to Immersion Cooling of Power Electronics in Traction Systems
Barnes, C. M., & Tuma, P. E. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049864 · Cited by 61
He, F., Wang, H., & Ma, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.069 · Cited by 60
Heat transfer performance of T-Y type micro-channel heat sink with liquid GaInSn coolant
Liu, H., An, X.-K., & Wang, C. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.06.008 · Cited by 58
Thermal management of a large prismatic battery pack based on reciprocating flow and active control
Wang, H., & Ma, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.060 · Cited by 58
Cho, G., Choi, J., Park, J.-H., & Won, S. (2014) · International Journal of Automotive Technology · doi:10.1007/s12239-014-0083-x · Cited by 56
Damay, N., Forgez, C., Bichat, M., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.083 · Cited by 56
Murashko, K., Mityakov, A. V., Mityakov, V. Y., Sapozhnikov, S. Z., Jokiniemi, J. K., & Pyrhonen, J. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.130 · Cited by 55
Esmaeili, J., & Jannesari, H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.052 · Cited by 48
Thermal Management Analysis of a Lithium-Ion Battery Pack using Flow Network Approach
Karimi, G., & Dehghan, A. R. (2012) · International Journal of Mechanical Engineering and Mechatronics · doi:10.11159/ijmem.2012.011 · Cited by 34
Design, fabrication and test of an integrated multi-microchannel heat sink for electronics cooling
Silvério, V., Cardoso, S., Gaspar, J., Freitas, P. P., & Moreira, A. L. N. (2015) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2015.09.023 · Cited by 32
Li-ion battery cooling system integrates in nano-fluid environment
Tran, L. B., Lopez, J., Lopez, J., Uriostegui, A., Barrera, A., & Wiggins, N. (2016) · Applied Nanoscience · doi:10.1007/s13204-016-0539-6 · Cited by 24
Lumped Parameter Modeling of Electrochemical and Thermal Dynamics in Lithium-Ion Batteries
Schmidt, A., Bitzer, M., Imre, Á. W., et al. (2010) · IFAC Proceedings Volumes · doi:10.3182/20100712-3-de-2013.00010 · Cited by 10
Cited by
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Immersion cooling for lithium-ion batteries – A review
Roe, C., Feng, X., White, G., Li, R., Wang, H., Rui, X., Li, C., Zhang, F., Null, V., Parkes, M., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231094 · Cited by 590
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Kumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Metadata
- Authors
- Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 142
- Pages
- 10-29
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2809975514
- Cited by
- 542
- References
- 110
- FWCI
- 16.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.