Battery thermal management system employing phase change material with cell-to-cell air cooling
The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
In a conventional system, the cells of the entire battery pack are sandwiched in a single phase change material (PCM). The PCM material confining the corner cells may reject heat at a faster rate to the adjoining ambient air as compared to the cells located in the middle of the pack. In this work, the conventional battery layout system is modified to induce active and passive cooling for each cell of a battery module. For this, battery pack is arranged into several modules; each module comprised of six cylindrical cells in a 1S6P arrangement. Each cell is placed in a 4 mm cylindrical gap enclosure filled with phase change material and interconnected together for further cooling at inter-spacings. Cooling performance of such modified layout is reported at different discharge rates (2C and 4C) and ambient condition (27 °C, 35 °C and 40 °C). It is found that confined phase change material around each cell help in better heat dissipation from PCM and improved temperature uniformity in the module.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Brent, A. D., Voller, V. R., & Reid, K. J. (1988) · Numerical Heat Transfer · doi:10.1080/10407788808913615 · Cited by 1,699
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Thermal stability of phase change materials used in latent heat energy storage systems: A review
Rathod, M. K., & Banerjee, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.022 · Cited by 767
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
The low temperature performance of Li-ion batteries
Zhang, S. S., Xu, K., & Jow, T. R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00618-3 · Cited by 712
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Thermal modeling and design considerations of lithium-ion batteries
Al Hallaj, S., Maleki, H., Hong, J. S., & Selman, J. R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00178-0 · Cited by 454
Kamkari, B., Shokouhmand, H., & Bruno, F. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.014 · Cited by 434
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Al-Hallaj, S., & Selman, J. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00196-9 · Cited by 325
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
A comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Thermal management of Li-ion battery with liquid metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.054 · Cited by 285
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Sarı, A. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00251-0 · Cited by 245
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
Li, X., He, F., & Ma, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.073 · Cited by 210
Dynamic Thermal Model of Li-Ion Battery for Predictive Behavior in Hybrid and Fuel Cell Vehicles
Park, C., & Jaura, A. K. (2003) · SAE Technical Paper Series · doi:10.4271/2003-01-2286 · Cited by 205
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
(2003) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(03)92561-6 · Cited by 194
Weng, J., Yang, X., Zhang, G., Ouyang, D., Chen, M., & Wang, J. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.050 · Cited by 176
Wu, W., Wu, W., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.068 · Cited by 169
Optimization of thermal management system for Li-ion batteries using phase change material
Li, Y., Du, Y., Xu, T., Wu, H., Zhou, X., Ling, Z., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.055 · Cited by 164
He, F., Li, X., & Ma, L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.038 · Cited by 162
Panchal, S., Dinçer, İ., Agelin‐Chaab, M., Fraser, R., & Fowler, M. W. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.08.016 · Cited by 161
Yan, J., Li, K., Chen, H., Wang, Q., & Sun, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.058 · Cited by 157
Active cooling based battery thermal management using composite phase change materials
Zhao, Y., Zou, B., Li, C. S., & Ding, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.697 · Cited by 127
Cooling Li-ion batteries of racing solar car by using multiple phase change materials
Moraga, N. O., Xamán, J., & Araya, R. H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.183 · Cited by 124
Tao, Y. B., & He, Y. L. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.039 · Cited by 120
Heat transfer and thermal management of electric vehicle batteries with phase change materials
Ramandi, M. Y., Dinçer, İ., & Naterer, G. F. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0766-z · Cited by 114
Thermal performance of a novel confined flow Li-ion battery module
Jilte, R. D., Kumar, R., & Ma, L. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.099 · Cited by 110
Self-citationJilte, R. D., & Kumar, R. (2018) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2018.07.015 · Cited by 108
Self-citationA rechargeable lithium-ion battery module for underwater use
Pendergast, D. R., DeMauro, E. P., Fletcher, M., Stimson, E., & Mollendorf, J. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.071 · Cited by 80
Thermal impedance spectroscopy for Li-ion batteries using heat-pulse response analysis
Barsoukov, E., Jang, J. H., & Lee, H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00080-0 · Cited by 71
Thermal Management in Hybrid Power Systems Using Cylindrical and Prismatic Battery Cells
He, F., & Ma, L. (2015) · Heat Transfer Engineering · doi:10.1080/01457632.2015.1060776 · Cited by 65
Temperature response of a high power lithium-ion battery subjected to high current discharge
Wang, C., Lin, T., Huang, J., & Rao, Z. (2015) · Materials Research Innovations · doi:10.1179/1432891715z.0000000001318 · Cited by 41
Thermal performance of pouch Lithium-ion battery module cooled by phase change materials
Bai, F., Chen, M., Song, W., Li, Y., Feng, Z., & Li, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.891 · Cited by 36
Maximum Power Estimation of Lithium-Ion Batteries Accounting for Thermal and Electrical Constraints
Kim, Y., Mohan, S. N., Siegel, J. B., & Stefanopoulou, A. G. (2013) · doi:10.1115/dscc2013-3935 · Cited by 22
Cited by
A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles
Zhao, G., Wang, X., Negnevitsky, M., & Zhang, H. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230001 · Cited by 606
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Self-citationAkinlabi, A. A. H., & Solyali, D. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109815 · Cited by 428
A novel battery thermal management system using nano-enhanced phase change materials
Jilte, R., Afzal, A., & Panchal, S. (2021) · Energy · doi:10.1016/j.energy.2020.119564 · Cited by 422
Self-citation
Metadata
- Authors
- Jilte, R. D., Kumar, R., Ahmadi, M. H., & Chen, L.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 161
- Pages
- 114199
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2966607880
- Cited by
- 272
- References
- 58
- FWCI
- 12.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.