The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles
Abstract
Abstract This paper presents the concept of a hybrid thermal management system (TMS), including air cooling and heat pipe for electric vehicles (EVs). Mathematical and thermal models are described to predict the thermal behavior of a battery module consisting of 24 cylindrical cells. Details of various thermal management techniques, especially natural air cooling and forced-air cooling TMS are discussed and compared. Moreover, several optimizations comprising the effect of cell spacing, air velocity, different ambient temperatures, and adding a heat pipe with copper sheets (HPCS) are proposed. The mathematical models are solved by COMSOL Multiphysics®, the commercial computational fluid dynamics (CFD) software. The simulation results are validated against experimental data indicating that the proposed cooling method is robust to optimize the TMS with HPCS, which provides guidelines for further design optimization for similar systems. Results indicate that the maximum module temperature for the cooling strategy using forced-air cooling, heat pipe, and HPCS reaches 42.4 °C, 37.5 °C, and 37.1 °C which can reduce the module temperature compared with natural air cooling by up to 34.5%, 42.1%, and 42.7% respectively. Furthermore, there is 39.2%, 66.5%, and 73.4% improvement in the temperature uniformity of the battery module for forced-air cooling, heat pipe, and HPCS respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Research works printed but not linked: 10
- Behi, 2018, Evaluation of a novel solar driven sorption cooling/heating system integrated with PCM storage compartment, Energy, 164, 449, 10.1016/j.energy.2018.08.166 · doi:10.1016/j.energy.2018.08.166
- Gao, 2019, Hazardous characteristics of charge and discharge of lithium-ion batteries under adiabatic environment and hot environment, Int. J. Heat Mass Transf., 141, 419, 10.1016/j.ijheatmasstransfer.2019.06.075 · doi:10.1016/j.ijheatmasstransfer.2019.06.075
- Behi, 2017, Investigation of PCM-assisted heat pipe for electronic cooling, Appl. Therm. Eng., 127, 1132, 10.1016/j.applthermaleng.2017.08.109 · doi:10.1016/j.applthermaleng.2017.08.109
- Gupta, 2018, Heat transfer mechanisms in heat pipes using nanofluids – A review, Exp. Therm. Fluid Sci., 90, 84, 10.1016/j.expthermflusci.2017.08.013 · doi:10.1016/j.expthermflusci.2017.08.013
- Jiaqiang, 2018, Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle, Appl. Therm. Eng., 144, 231, 10.1016/j.applthermaleng.2018.08.064 · doi:10.1016/j.applthermaleng.2018.08.064
- Sheikholeslami, 2016, Heat transfer improvement in a double pipe heat exchanger by means of perforated turbulators, Energy Convers. Manage., 127, 112, 10.1016/j.enconman.2016.08.090 · doi:10.1016/j.enconman.2016.08.090
- Sheikholeslami, 2016, Heat transfer enhancement in an air to water heat exchanger with discontinuous helical turbulators; experimental and numerical studies, Energy, 116, 341, 10.1016/j.energy.2016.09.120 · doi:10.1016/j.energy.2016.09.120
- Ghanbarpour, 2015, Entropy generation analysis of cylindrical heat pipe using nanofluid, Thermochim. Acta., 610, 37, 10.1016/j.tca.2015.04.028 · doi:10.1016/j.tca.2015.04.028
- Elnaggar, 2013, Experimental and Numerical Studies of Finned L-Shape Heat Pipe for Notebook-PC Cooling, IEEE Trans. Components, Packag. Manuf. Technol., 3, 978, 10.1109/TCPMT.2013.2245944 · doi:10.1109/tcpmt.2013.2245944
- Zhu, 1999, Analysis of cylindrical heat pipes incorporating the effects of liquid–vapor coupling and non-Darcian transport—a closed form solution, Int. J. Heat Mass Transf., 42, 3405, 10.1016/S0017-9310(99)00017-4 · doi:10.1016/s0017-9310(99)00017-4
Cited by
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097
Akbarzadeh, M., Kalogiannis, T., Jaguemont, J., Jin, L., Behi, H., Karimi, D., Beheshti, H., Van Mierlo, J., & Berecibar, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117503 · Cited by 431
Self-citationZhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
A comprehensive review on heat pipe based battery thermal management systems
Weragoda, D. M., Tian, G., Burkitbayev, A., Lo, K.-H., & Zhang, T. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120070 · Cited by 330
A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM
Murali, G., Sravya, G. S. N., Jaya, J., & Naga Vamsi, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111513 · Cited by 325
Metadata
- Authors
- Behi, H., Karimi, D., Behi, M., Ghanbarpour, M., Jaguemont, J., Sokkeh, M. A., Gandoman, F. H., Berecibar, M., & Van Mierlo, J.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 174
- Pages
- 115280
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W3015422452
- Cited by
- 365
- References
- 39
- FWCI
- 16.25
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Flanders Make
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2020.115280
- The paper
- Behi, H., Karimi, D., Behi, M., Ghanbarpour, M., Jaguemont, J., Sokkeh, M. A., Gandoman, F. H., Berecibar, M., & Van Mierlo, J. (2020). A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2020.115280
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.