Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 243

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Comprehensive review and future prospects on chip-scale thermal management: Core of data center’s thermal management

Li, Ziyong, Luo, Hailiang, Jiang, Yuguang, Liu, Haichao, Xu, Lian, Cao, Kunyuan, Wu, Hongjie, Gao, Peng, Liu, Hong · 2024 · Applied Thermal Engineering

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.applthermaleng.2024.123612

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Research works printed but not linked: 371

  1. Zhao, 2023, A critical review on the thermal management of data center for local hotspot elimination, Energ. Build., 297, 10.1016/j.enbuild.2023.113486 · DOI
  2. J. Athavale, M. Yoda, Y. Joshi, Thermal modeling of data centers for control and energy usage optimization 50, 123–186. · DOI
  3. Cho, 2023, Balanced comparative assessment of thermal performance and energy efficiency for three cooling solutions in data centers, Energy, 285, 10.1016/j.energy.2023.129370 · DOI
  4. Du, 2023, Dynamic thermal environment management technologies for data center: A review, Renew. Sustain. Energy Rev., 187, 10.1016/j.rser.2023.113761 · doi:10.1016/j.rser.2023.113761
  5. Wang, 2023, Carbon awareness oriented data center location and configuration: An integrated optimization method, Energy, 278, 10.1016/j.energy.2023.127744 · DOI
  6. Park, 2023, A liquid desiccant-assisted free-cooling system for energy-efficient data centers in hot and humid climates, Case Stud. Therm. Eng., 52, 10.1016/j.csite.2023.103683 · DOI
  7. Isazadeh, 2023, Thermal management in legacy air-cooled data centers: An overview and perspectives, Renew. Sustain. Energy Rev., 187, 10.1016/j.rser.2023.113707 · doi:10.1016/j.rser.2023.113707
  8. G.D. Chethana, B. Sadashive Gowda, Thermal management of air and liquid cooled data centres: A review, Materials Today: Proceedings 45 (2021) 145–149. · doi:10.1016/j.matpr.2020.10.396
  9. Dai, 2021, A Multi-Scale Thermal Analysis Method for Data Centers with Application in a Ship Data Center, J. Therm. Sci., 30, 1973, 10.1007/s11630-021-1494-4 · DOI
  10. Smoyer, 2019, Brief Historical Perspective in Thermal Management and the Shift Toward Management at the Nanoscale, Heat Transfer Eng., 40, 269, 10.1080/01457632.2018.1426265 · DOI
  11. Zulkifli Ahmad, 2023, Mohamad Adzhar Md Zawawi, Chapter 6 - Electronic packaging and thermal management, 389
  12. Rakshith, 2022, Cooling of high heat flux miniaturized electronic devices using thermal ground plane: An overview, Renew. Sustain. Energy Rev., 170, 10.1016/j.rser.2022.112956 · DOI
  13. Zhang, 2021, A review of the state-of-the-art in electronic cooling, e-Prime - Advances in Electrical Engineering, Electronics and Energy, 1
  14. Du, 2023, An overview of heat transfer enhancement methods in microchannel heat sinks, Chem. Eng. Sci., 280, 10.1016/j.ces.2023.119081 · DOI
  15. Zhu, 2023, Development and Prospects of Manifold Microchannel Heat Sink Research, J. Refrigeration, 44, 15
  16. Yin, 2022, Spray Cooling as a High-Efficient Thermal Management Solution: A Review, Energies, 15, 8547, 10.3390/en15228547 · doi:10.3390/en15228547
  17. Pedram, 2006, Thermal Modeling, Analysis, and Management in VLSI Circuits: Principles and Methods, Proc. IEEE, 94, 1487, 10.1109/JPROC.2006.879797 · DOI · Paper page
  18. Wang, 2018, 3D Integrated Circuit Cooling with Microfluidics, Micromachines, 9, 10.3390/mi9060287 · doi:10.3390/mi9060287
  19. Du, 2023, Research progress of microchannel cooling technology for high-density microsystems, Miroelectron. Comput., 87
  20. Chen, 2023, Research on factors of heat dissipation of CPU chips in FCBGA package, Comput. Eng. Sci., 45, 406
  21. Kheirabadi, 2016, Cooling of server electronics: A design review of existing technology, Appl. Therm. Eng., 105, 622, 10.1016/j.applthermaleng.2016.03.056 · doi:10.1016/j.applthermaleng.2016.03.056
  22. Yang, 2023, Embedded microfluidic cooling technology for large-area processing chips, Miroelectron. Comput., 105
  23. L.-T. Yeh, Thermal management of microelectronic equipment: Heat transfer theory, analysis methods, and design practices / L.T. Yeh, Ph.D., P.E, ASME Press, New York, NY, 2016.
  24. Xu, 2022, Spray Cooling on Enhanced Surfaces: A Review of the Progress and Mechanisms, J. Electron. Packag, 144, 10.1115/1.4050046 · doi:10.1115/1.4050046
  25. Wang, 2023, Structural parameters study of porous medium heat exchanger for high-power chip cooling, Appl. Therm. Eng., 232, 10.1016/j.applthermaleng.2023.120906 · doi:10.1016/j.applthermaleng.2023.120906
  26. K.R. Aglawe, R.K. Yadav, S.B. Thool, Current Technologies on Electronics Cooling and Scope for Further Improvement: A Typical Review, in: R. Pratap Singh (Ed.), Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020) Optimization in Industrial and Manufacturing Systems and Applications, Springer, Cham, 2022, pp. 389–408. · doi:10.1007/978-3-030-73495-4_27
  27. Chuang, 2021, Boiling Enhanced Lidded Server Packages for Two-Phase Immersion Cooling Using Three-Dimensional Metal Printing and Metal Injection Molding Technologies, J. Electron. Packag, 143, 10.1115/1.4052711 · doi:10.1115/1.4052711
  28. Wang, 2017, A Quick Overview of Compact Air-Cooled Heat Sinks Applicable for Electronic Cooling—Recent Progress, Inventions, 2, 5, 10.3390/inventions2010005 · DOI
  29. Khattak, 2019, Air cooled heat sink geometries subjected to forced flow: A critical review, Int. J. Heat Mass Transf., 130, 141, 10.1016/j.ijheatmasstransfer.2018.08.048 · DOI
  30. Dhayanidhi, 2023, Heat transfer performance of air-cooled pin–fin heatsinks: a review, J Therm Anal Calorim, 148, 623, 10.1007/s10973-022-11691-z · doi:10.1007/s10973-022-11691-z
  31. S.S. Gore, A.S. Dhoble, Server processor heat sink analysis and modifications to improve its thermal performance, Materials Today: Proceedings 82 (2023) 208–216. · doi:10.1016/j.matpr.2023.01.118
  32. Abuşka, 2023, A comparative experimental thermal performance analysis of conical pin fin heat sink with staggered and modified staggered layout under forced convection, Therm. Sci. Eng. Prog., 37
  33. Chen, 2016, Analytical analysis and experimental verification of trapezoidal fin for assessment of heat sink performance and material saving, Appl. Therm. Eng., 98, 203, 10.1016/j.applthermaleng.2015.11.131 · doi:10.1016/j.applthermaleng.2015.11.131
  34. Chen, 2017, Analytical analysis and experimental verification of interleaved parallelogram heat sink, Appl. Therm. Eng., 112, 739, 10.1016/j.applthermaleng.2016.10.102 · doi:10.1016/j.applthermaleng.2016.10.102
  35. H.-L. Chen, C.-C. Wang, Analytical and experimental verification of interleaved trapezoidal heat sink, in: 2017 33rd Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), 2017, pp. 197–203. · doi:10.1109/semi-therm.2017.7896930
  36. Nilpueng, 2021, Effect of pin fin configuration on thermal performance of plate pin fin heat sinks, Case Stud. Therm. Eng., 27, 10.1016/j.csite.2021.101269 · doi:10.1016/j.csite.2021.101269
  37. Baranyuk, 2019, Investigation of the flow structure and heat transfer intensity of surfaces with split plate finning, Therm. Sci. Eng. Prog., 11, 28, 10.1016/j.tsep.2019.03.018 · doi:10.1016/j.tsep.2019.03.018
  38. Meijer, 2010, Engineering. Cooling energy-hungry data centers, Science, 328, 318, 10.1126/science.1182769 · DOI
  39. Hadad, 2020, Performance analysis and shape optimization of a water-cooled impingement micro-channel heat sink including manifolds, Int. J. Therm. Sci., 148, 10.1016/j.ijthermalsci.2019.106145 · doi:10.1016/j.ijthermalsci.2019.106145
  40. Gullbrand, 2019, Liquid Cooling of Compute System, J. Electron. Packag, 141, 10.1115/1.4042802 · DOI
  41. He, 2022, Performance analysis and structural optimization of a finned liquid-cooling radiator for chip heat dissipation, Appl. Energy, 327, 10.1016/j.apenergy.2022.120048 · doi:10.1016/j.apenergy.2022.120048
  42. Alihosseini, 2020, Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review, Appl. Therm. Eng., 170, 10.1016/j.applthermaleng.2020.114974 · DOI
  43. Lad, 2021, Reduced Order Design Optimization of Liquid Cooled Heat Sinks, J. Electron. Packag, 143, 10.1115/1.4052400 · DOI
  44. Zhao, 2016, Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling, Appl. Therm. Eng., 93, 1347, 10.1016/j.applthermaleng.2015.08.105 · DOI
  45. Li, 2023, Recent Development of Heat Sink and Related Design Methods, Energies, 16, 7133, 10.3390/en16207133 · DOI
  46. Tuckerman, 1981, High-performance heat sinking for VLSI, IEEE Electron Device Lett., 2, 126, 10.1109/EDL.1981.25367 · DOI · Paper page
  47. Ramesh, 2021, Latest Advancements in Heat Transfer Enhancement in the Micro-channel Heat Sinks: A Review, Arch Computat Methods Eng, 28, 3135, 10.1007/s11831-020-09495-1 · DOI · Paper page
  48. Harris, 2022, Overview of recent trends in microchannels for heat transfer and thermal management applications, Chem. Eng. Process. - Process Intesif., 181
  49. Sadique, 2022, Samsher, Heat transfer augmentation in microchannel heat sink using secondary flows: A review, Int. J. Heat Mass Transf., 194, 10.1016/j.ijheatmasstransfer.2022.123063 · DOI · Paper page
  50. Bhandari, 2023, Design modifications in micro pin fin configuration of microchannel heat sink for single phase liquid flow: A review, J. Storage Mater., 66
  51. Singh, 2023, A critical review on single-phase thermo-hydraulic enhancement in geometrically modified microchannel devices, Appl. Therm. Eng., 235, 10.1016/j.applthermaleng.2023.121729 · DOI
  52. He, 2021, Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review, Energy, 216, 10.1016/j.energy.2020.119223 · DOI · Paper page
  53. Lu, 2021, Study on the Performance of a Y-Shaped Liquid Cooling Heat Sink Based on Constructal Law for Electronic Chip Cooling, J. Therm. Sci. Eng. Appl., 13, 10.1115/1.4047946 · doi:10.1115/1.4047946
  54. Drummond, 2018, Characterization of hierarchical manifold microchannel heat sink arrays under simultaneous background and hotspot heating conditions, Int. J. Heat Mass Transf., 126, 1289, 10.1016/j.ijheatmasstransfer.2018.05.127 · DOI · Paper page
  55. Drummond, 2018, A hierarchical manifold microchannel heat sink array for high-heat-flux two-phase cooling of electronics, Int. J. Heat Mass Transf., 117, 319, 10.1016/j.ijheatmasstransfer.2017.10.015 · DOI · Paper page
  56. A, 2023, Microchannel heat sink with microstructured wall — A critical study on fluid flow and heat transfer characteristics, Therm. Sci. Eng. .ress, 38
  57. Zhu, 2021, Fluid flow and heat transfer characteristics of microchannel heat sinks with different groove shapes, Int. J. Therm. Sci., 161, 10.1016/j.ijthermalsci.2020.106721 · doi:10.1016/j.ijthermalsci.2020.106721
  58. Shao, 2024, Multi-objective optimization of a microchannel heat sink combining cavities and longitudinal vortex generators based on CFD and NSGA-II genetic algorithm, Int. J. Heat Mass Transf., 220, 10.1016/j.ijheatmasstransfer.2023.125019 · doi:10.1016/j.ijheatmasstransfer.2023.125019
  59. Deng, 2021, A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks, Int. J. Heat Mass Transf., 175, 10.1016/j.ijheatmasstransfer.2021.121332 · doi:10.1016/j.ijheatmasstransfer.2021.121332
  60. Pu, 2024, Numerical study on temperature distribution uniformity and cooling performance of manifold microchannel heat sink, Appl. Therm. Eng., 237, 10.1016/j.applthermaleng.2023.121779 · DOI
  61. Marseglia, 2024, Enhancement of microchannel heat sink heat transfer: Comparison between different heat transfer enhancement strategies, Exp. Therm Fluid Sci., 150, 10.1016/j.expthermflusci.2023.111052 · DOI
  62. Maghrabie, 2023, Microchannel heat sinks with nanofluids for cooling electronic components: Performance enhancement, challenges, and limitations, Therm. Sci. Eng. Prog., 37
  63. Bahiraei, 2020, Irreversibility characteristics of a modified microchannel heat sink operated with nanofluid considering different shapes of nanoparticles, Int. J. Heat Mass Transf., 151, 10.1016/j.ijheatmasstransfer.2020.119359 · DOI
  64. Jung, 2021, Experimental investigation of heat transfer of Al2O3 nanofluid in a microchannel heat sink, Int. J. Heat Mass Transf., 179, 10.1016/j.ijheatmasstransfer.2021.121729 · doi:10.1016/j.ijheatmasstransfer.2021.121729
  65. Chamkha, 2018, On the nanofluids applications in microchannels: A comprehensive review, Powder Technol., 332, 287, 10.1016/j.powtec.2018.03.044 · DOI
  66. Abdollahi, 2018, Numerical investigation of fluid flow and heat transfer of nanofluids in microchannel with longitudinal fins, Ain Shams Eng. J., 9, 3411, 10.1016/j.asej.2017.05.011 · DOI
  67. Bahiraei, 2019, Efficacy of a hybrid nanofluid in a new microchannel heat sink equipped with both secondary channels and ribs, J. Mol. Liq., 273, 88, 10.1016/j.molliq.2018.10.003 · DOI
  68. Arani, 2017, Nanoparticle shape effects on thermal-hydraulic performance of boehmite alumina nanofluids in a sinusoidal–wavy mini-channel with phase shift and variable wavelength, Int. J. Mech. Sci., 128–129, 550, 10.1016/j.ijmecsci.2017.05.030 · DOI
  69. Rastogi, 2023, Interplay of geometry and shape-engineered-nanoparticles for efficient thermal performance in forced convection-based electronic cooling, Numerical Heat Transfer, Part A: Appl., 1, 10.1080/10407782.2023.2251090 · DOI
  70. Bahiraei, 2021, Impact of nanoparticle shape on thermohydraulic performance of a nanofluid in an enhanced microchannel heat sink for utilization in cooling of electronic components, Chin. J. Chem. Eng., 40, 36, 10.1016/j.cjche.2020.11.026 · DOI
  71. Prajapati, 2017, Flow boiling instabilities in microchannels and their promising solutions – A review, Exp. Therm Fluid Sci., 88, 576, 10.1016/j.expthermflusci.2017.07.014 · doi:10.1016/j.expthermflusci.2017.07.014
  72. Whitaker, 2024, Flow regimes and heat transfer mechanisms affecting supercritical transition in microchannels, Int. J. Heat Mass Transf., 218, 10.1016/j.ijheatmasstransfer.2023.124749 · doi:10.1016/j.ijheatmasstransfer.2023.124749
  73. Wu, 2014, On further enhancement of single-phase and flow boiling heat transfer in micro/minichannels, Renew. Sustain. Energy Rev., 40, 11, 10.1016/j.rser.2014.07.171 · doi:10.1016/j.rser.2014.07.171
  74. Abdellatif, 2024, Flow Instabilities in boiling channels and their suppression methodologies—A review, Nucl. Eng. Des., 421, 10.1016/j.nucengdes.2024.113114 · DOI
  75. Mao, 2021, A critical review on measures to suppress flow boiling instabilities in microchannels, Heat Mass Transfer, 57, 889, 10.1007/s00231-020-03009-2 · DOI
  76. Wang, 2022, Dynamic instabilities of flow boiling in micro-channels: A review, Appl. Therm. Eng., 214, 10.1016/j.applthermaleng.2022.118773 · doi:10.1016/j.applthermaleng.2022.118773
  77. Kandlikar, 2012, History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review, J. Heat Transfer, 134, 10.1115/1.4005126 · DOI · Paper page
  78. Kuo, 2009, Pressure effects on flow boiling instabilities in parallel microchannels, Int. J. Heat Mass Transf., 52, 271, 10.1016/j.ijheatmasstransfer.2008.06.015 · DOI
  79. Lan, 2023, Experimental investigation on the effects of swirling flow on flow boiling heat transfer and instability in a minichannel heat sink, Appl. Therm. Eng., 219, 10.1016/j.applthermaleng.2022.119512 · doi:10.1016/j.applthermaleng.2022.119512
  80. Liang, 2020, Review of channel flow boiling enhancement by surface modification, and instability suppression schemes, Int. J. Heat Mass Transf., 146, 10.1016/j.ijheatmasstransfer.2019.118864 · DOI · Paper page
  81. Khalesi, 2020, Supercritical CO2 conjugate heat transfer and flow analysis in a rectangular microchannel subject to uniformly heated substrate wall, Therm. Sci. Eng. Prog., 19
  82. Huang, 2024, Thermo-hydraulic characteristics and structural optimization of supercritical CO2-cooled microchannel heat sink, Int. Commun. Heat Mass Transfer, 154, 10.1016/j.icheatmasstransfer.2024.107438 · doi:10.1016/j.icheatmasstransfer.2024.107438
  83. U. Manda, Y. Peles, A Comparative Analysis of Ammonia and Supercritical Carbon Dioxide for Microchannel Cooling (2024). · doi:10.2139/ssrn.4763674
  84. U. Manda, Y. Peles, S. Putnam, Comparison of Heat Transfer Characteristics of Flow of Supercritical Carbon Dioxide and Water inside a Square Microchannel, in: 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm), 2021, pp. 1207–1213. · doi:10.1109/itherm51669.2021.9503192
  85. Manda, 2024, Effects of cross-sectional shape on flow and heat transfer of the laminar flow of supercritical carbon dioxide inside horizontal microchannels, Int. J. Therm. Sci., 201, 10.1016/j.ijthermalsci.2024.108992 · doi:10.1016/j.ijthermalsci.2024.108992
  86. U. Manda, Y. Peles, Performance Evaluation Criteria of a Star-Shaped Cross-Sectional Microchannel with Supercritical Carbon Dioxide (2024). · doi:10.2139/ssrn.4792854
  87. Derby, 2012, Condensation heat transfer in square, triangular, and semi-circular mini-channels, Int. J. Heat Mass Transf., 55, 187, 10.1016/j.ijheatmasstransfer.2011.09.002 · doi:10.1016/j.ijheatmasstransfer.2011.09.002
  88. Jajja, 2020, Geometry and orientation effects in non-uniformly heated microchannel heat exchangers using supercritical carbon dioxide, Exp. Therm Fluid Sci., 112, 10.1016/j.expthermflusci.2019.109979 · doi:10.1016/j.expthermflusci.2019.109979
  89. Parahovnik, 2022, Heat transfer mode shift to adiabatic thermalization in near-critical carbon dioxide with flow boiling in a microchannel, Int. J. Heat Mass Transf., 188, 10.1016/j.ijheatmasstransfer.2022.122629 · doi:10.1016/j.ijheatmasstransfer.2022.122629
  90. Manda, 2024, Effects of buoyancy in a laminar flow of supercritical carbon dioxide in a horizontal microchannel at different gravities, Int. Commun. Heat Mass Transfer, 150, 10.1016/j.icheatmasstransfer.2023.107195 · doi:10.1016/j.icheatmasstransfer.2023.107195
  91. Manda, 2022, Thermoacoustic waves and Piston Effect inside a microchannel with Carbon Dioxide near critical conditions, Therm. Sci. Eng. Prog., 36
  92. A. Joy, S. K.V., B. Baby, Review on fabrication and experimental study of microchannel heat sinks for cooling of electronic components, Materials Today: Proceedings 72 (2023) 2985–2991. · doi:10.1016/j.matpr.2022.08.186
  93. Aglawe, 2023, Fabrication, experimentation and numerical simulation of micro channel heat sink for enhancing thermal performance of electronic devices, Int J Interact Des Manuf, 10.1007/s12008-023-01482-7 · doi:10.1007/s12008-023-01482-7
  94. Collins, 2019, Evaluation of Additively Manufactured Microchannel Heat Sinks, IEEE Trans. Compon., Packag. Manufact. Technol., 9, 446, 10.1109/TCPMT.2018.2866972 · DOI
  95. J. Byiringiro, M. Chaanaoui, S. Vaudreuil, Potential of Additive Manufacturing for Complex System Configurations to Improve Heat Transfer, in: K. Zarbane, Z. Beidouri (Eds.), Proceedings of CASICAM 2022, Springer Nature Switzerland, Cham, 2023, pp. 265–275. · doi:10.1007/978-3-031-32927-2_24
  96. Zhou, 2022, All laser-based fabrication of microchannel heat sink, Mater. Des., 221, 10.1016/j.matdes.2022.110968 · DOI
  97. Back, 2019, Design, Fabrication, and Characterization of a Compact Hierarchical Manifold Microchannel Heat Sink Array for Two-Phase Cooling, IEEE Trans. Compon., Packag. Manufact. Technol., 9, 1291, 10.1109/TCPMT.2019.2899648 · DOI
  98. van Erp, 2020, Co-designing electronics with microfluidics for more sustainable cooling, Nature, 585, 211, 10.1038/s41586-020-2666-1 · DOI · Paper page
  99. Islam, 2020, Numerical Analysis of Liquid Cooling of 3D-ICs Using Embedded Channels, IEEE International Conference on Electro Information Technology (EIT), 2020, 233
  100. Rangarajan, 2023, A Review of Recent Developments in “On-Chip” Embedded Cooling Technologies for Heterogeneous Integrated Applications, Engineering, 26, 185, 10.1016/j.eng.2022.10.019 · doi:10.1016/j.eng.2022.10.019
  101. Sharma, 2015, Energy efficient hotspot-targeted embedded liquid cooling of electronics, Appl. Energy, 138, 414, 10.1016/j.apenergy.2014.10.068 · doi:10.1016/j.apenergy.2014.10.068
  102. Yang, 2024, Investigation of Z-type manifold microchannel cooling for ultra-high heat flux dissipation in power electronic devices, Int. J. Heat Mass Transf., 218, 10.1016/j.ijheatmasstransfer.2023.124792 · DOI
  103. R. van Erp, G. Kampitsis, L. Nela, R. Soleimanzadeh, N. Perera, E. Matioli, Bringing the Heat Sink Closer to the Heat: Evaluating Die-Embedded Microchannel Cooling of GaN-on-Si Power Devices, in: 2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), 2020, pp. 17–23. · DOI
  104. R. van Erp, E. Matioli, Microfluidic cooling for GaN electronic devices 407–439. · DOI
  105. Sharma, 2015, A novel method of energy efficient hotspot-targeted embedded liquid cooling for electronics: An experimental study, Int. J. Heat Mass Transf., 88, 684, 10.1016/j.ijheatmasstransfer.2015.04.047 · doi:10.1016/j.ijheatmasstransfer.2015.04.047
  106. Kuncoro, 2019, Immersion cooling as the next technology for data center cooling: A review, J. Phys.: Conf. Ser., 1402, 44057
  107. Pambudi, 2022, The immersion cooling technology: Current and future development in energy saving, Alex. Eng. J., 61, 9509, 10.1016/j.aej.2022.02.059 · DOI · Paper page
  108. Liang, 2019, Review of pool boiling enhancement by surface modification, Int. J. Heat Mass Transf., 128, 892, 10.1016/j.ijheatmasstransfer.2018.09.026 · doi:10.1016/j.ijheatmasstransfer.2018.09.026
  109. Shrigondekar, 2023, Investigations on performance of single-phase immersion cooling system, Int. J. Heat Mass Transf., 206, 10.1016/j.ijheatmasstransfer.2023.123961 · DOI
  110. G. Gupta, V. Nair, P. Bansode, R. Suthar, S.A. Pundla, J. Herring, J. Lamotte-Dawaghreh, K.B. Sivaraju, D. Agonafer, P. Mynampati, M. Sweeney, A Numerical Study Comparing Forced and Natural Convection in a High-Density Single-Phase Immersed Cooled Server, ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (2023). · doi:10.1115/ipack2023-112065
  111. S. Saini, G. Gupta, P. Bansode, P. Shahi, V.S. Simon, H. Modi, D. Agonafer, J. Shah, A Numerical Study on the Influence of Mixed Convection Heat Transfer in Single-Phase Immersion Cooling, ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (2023). · doi:10.1115/ipack2023-112005
  112. Huang, 2023, Natural and forced convection heat transfer characteristics of single-phase immersion cooling systems for data centers, Int. J. Heat Mass Transf., 207, 10.1016/j.ijheatmasstransfer.2023.124023 · DOI
  113. Ikhlaq, 2021, Synthetic Jet Cooling Technology for Electronics Thermal Management—A Critical Review, IEEE Trans. Compon., Packag. Manufact. Technol., 11, 1156, 10.1109/TCPMT.2021.3087829 · doi:10.1109/tcpmt.2021.3087829
  114. Sarkar, 2023, Review of jet impingement cooling of electronic devices: Emerging role of surface engineering, Int. J. Heat Mass Transf., 206, 10.1016/j.ijheatmasstransfer.2023.123888 · DOI · Paper page
  115. Cheng, 2020, Design of a single-phase immersion cooling system through experimental and numerical analysis, Int. J. Heat Mass Transf., 160, 10.1016/j.ijheatmasstransfer.2020.120203 · doi:10.1016/j.ijheatmasstransfer.2020.120203
  116. Ozer, 2023, Effect of the acoustic manipulation on single phase immersion cooling performance of discretely heated vertical plate, Int. J. Heat Mass Transf., 217, 10.1016/j.ijheatmasstransfer.2023.124649 · doi:10.1016/j.ijheatmasstransfer.2023.124649
  117. Hsu, 2018, Enhanced immersion cooling using two-tier micro- and nano-structures, Appl. Therm. Eng., 131, 864, 10.1016/j.applthermaleng.2017.12.067 · doi:10.1016/j.applthermaleng.2017.12.067
  118. El-Genk, 2012, Immersion cooling nucleate boiling of high power computer chips, Energ. Conver. Manage., 53, 205, 10.1016/j.enconman.2011.08.008 · doi:10.1016/j.enconman.2011.08.008
  119. Chen, 2024, Thermal performance evaluation of electronic fluorinated liquids for single-phase immersion liquid cooling, Int. J. Heat Mass Transf., 220, 10.1016/j.ijheatmasstransfer.2023.124951 · doi:10.1016/j.ijheatmasstransfer.2023.124951
  120. S. Thomas, C.B. Sobhan, J. Taha-Tijerina, T.N. Narayanan, P.M. Ajayan, Investigations on Transient Natural Convection in Boron Nitride-Mineral Oil Nanofluid Systems, ASME 2012 International Mechanical Engineering Congress and Exposition (2013) 671–678. · doi:10.1115/imece2012-87420
  121. A. Niazmand, P. Murthy, S. Saini, P. Shahi, P. Bansode, D. Agonafer, Numerical Analysis of Oil Immersion Cooling of a Server Using Mineral Oil and Al2O3 Nanofluid, in: ASME 2020 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, American Society of Mechanical Engineers, 10272020. · doi:10.1115/1.0003651v
  122. Luo, 2022, Research and optimization of thermophysical properties of sic oil-based nanofluids for data center immersion cooling, Int. Commun. Heat Mass Transfer, 131, 10.1016/j.icheatmasstransfer.2021.105863 · DOI
  123. Gebrael, 2022, High-efficiency cooling via the monolithic integration of copper on electronic devices, Nat Electron, 5, 394, 10.1038/s41928-022-00748-4 · DOI
  124. Birbarah, 2020, Water immersion cooling of high power density electronics, Int. J. Heat Mass Transf., 147, 10.1016/j.ijheatmasstransfer.2019.118918 · DOI · Paper page
  125. Bansode, 2020, Measurement of the Thermal Performance of a Custom-Build Single-Phase Immersion Cooled Server at Various High and Low Temperatures for Prolonged Time, J. Electron. Packag, 142, 10.1115/1.4045156 · doi:10.1115/1.4045156
  126. Kim, 2007, Spray cooling heat transfer: The state of the art, Int. J. Heat Fluid Flow, 28, 753, 10.1016/j.ijheatfluidflow.2006.09.003 · DOI · Paper page
  127. Anandan, 2008, Thermal management of electronics: A review of literature, Therm Sci, 12, 5, 10.2298/TSCI0802005A · DOI · Paper page
  128. Liang, 2017, Review of spray cooling – Part 1: Single-phase and nucleate boiling regimes, and critical heat flux, Int. J. Heat Mass Transf., 115, 1174, 10.1016/j.ijheatmasstransfer.2017.06.029 · DOI · Paper page
  129. Liang, 2017, Review of spray cooling – Part 2: High temperature boiling regimes and quenching applications, Int. J. Heat Mass Transf., 115, 1206, 10.1016/j.ijheatmasstransfer.2017.06.022 · doi:10.1016/j.ijheatmasstransfer.2017.06.022
  130. Zhang, 2022, Advanced Study of Spray Cooling: From Theories to Applications, Energies, 15, 9219, 10.3390/en15239219 · DOI
  131. Breitenbach, 2018, From drop impact physics to spray cooling models: a critical review, Exp Fluids, 59
  132. GaneshKumar, 2024, Spray cooling for hydrogen vehicle, electronic devices, solar and building (low temperature) applications: A state-of-art review, Renew. Sustain. Energy Rev., 189, 10.1016/j.rser.2023.113931 · doi:10.1016/j.rser.2023.113931
  133. Chen, 2016, Experimental study on optimal spray parameters of piezoelectric atomizer based spray cooling, Int. J. Heat Mass Transf., 103, 57, 10.1016/j.ijheatmasstransfer.2016.07.037 · doi:10.1016/j.ijheatmasstransfer.2016.07.037
  134. Yang, 2023, Review of internal cavitating flow in injection nozzles, external atomization and cooling in liquid nitrogen spray cooling systems, Cryogenics, 131, 10.1016/j.cryogenics.2023.103661 · DOI
  135. Xue, 2018, Numerical study of liquid nitrogen cavitating flow through nozzles of various shapes, Cryogenics, 94, 62, 10.1016/j.cryogenics.2018.07.009 · doi:10.1016/j.cryogenics.2018.07.009
  136. Vladyko, 2023, Influence of the Nozzle-to-Surface Distance on Spray Cooling Efficiency, Fluids, 8, 191, 10.3390/fluids8070191 · doi:10.3390/fluids8070191
  137. Gao, 2017, Effects of nozzle positioning on single-phase spray cooling, Int. J. Heat Mass Transf., 115, 1247, 10.1016/j.ijheatmasstransfer.2017.08.095 · doi:10.1016/j.ijheatmasstransfer.2017.08.095
  138. Yang, 2022, Numerical investigation on heat transfer enhancement and surface temperature non-uniformity improvement of spray cooling, Int. J. Therm. Sci., 173, 10.1016/j.ijthermalsci.2021.107374 · DOI
  139. Liu, 2019, Experimental study on heat transfer performance enhancement by micro-structured surfaces for inclination spray application, Int. J. Heat Mass Transf., 133, 631, 10.1016/j.ijheatmasstransfer.2018.12.177 · doi:10.1016/j.ijheatmasstransfer.2018.12.177
  140. Wang, 2023, Coupling dynamic thermal analysis and surface modification to enhance heat dissipation of R410A spray cooling for high-power electronics, Energy, 284, 10.1016/j.energy.2023.129224 · doi:10.1016/j.energy.2023.129224
  141. Zhao, 2024, Experimental investigation of heat transfer performance in gas-atomized spray cooling, Int. J. Heat Mass Transf., 218, 10.1016/j.ijheatmasstransfer.2023.124768 · doi:10.1016/j.ijheatmasstransfer.2023.124768
  142. J. Kansy, T. Kalmbach, A. Loges, T. Wetzel, A. Wiebelt, Experimental investigation of the influences of fluid properties on heat transfer for spray cooling, JEH(T) 28 (2021) 61–76. · doi:10.1615/jenhheattransf.2021038201
  143. Smakulski, 2016, A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques, Appl. Therm. Eng., 104, 636, 10.1016/j.applthermaleng.2016.05.096 · DOI · Paper page
  144. M. Asim, F.R. Siddiqui, Hybrid Nanofluids-Next-Generation Fluids for Spray-Cooling-Based Thermal Management of High-Heat-Flux Devices, Nanomaterials (Basel, Switzerland) 12 (2022). · DOI
  145. Marseglia, 2022, Thermofluid characterization of nanofluids in spray cooling, Appl. Therm. Eng., 210, 10.1016/j.applthermaleng.2022.118411 · doi:10.1016/j.applthermaleng.2022.118411
  146. Zhang, 2018, Enhancement mechanism of high alcohol surfactant on spray cooling: Experimental study, Int. J. Heat Mass Transf., 126, 363, 10.1016/j.ijheatmasstransfer.2018.05.130 · doi:10.1016/j.ijheatmasstransfer.2018.05.130
  147. Li, 2021, Theoretical study of heat transfer enhancement mechanism of high alcohol surfactant in spray cooling, Int. J. Therm. Sci., 163, 10.1016/j.ijthermalsci.2020.106816 · doi:10.1016/j.ijthermalsci.2020.106816
  148. Wang, 2022, Numerical study on heat transfer enhancement by spray-sublimation cooling with dry ice particles, Appl. Therm. Eng., 214, 10.1016/j.applthermaleng.2022.118809 · DOI
  149. Ning, 2023, Effect of dry ice jet velocity on cooling characteristics of electronic chip based on optimized geometry, Exp. Heat Transfer, 1, 10.1080/08916152.2023.2232370 · doi:10.1080/08916152.2023.2232370
  150. Benther, 2021, Heat transfer during multiple droplet impingement and spray cooling: Review and prospects for enhanced surfaces, Int. J. Heat Mass Transf., 178, 10.1016/j.ijheatmasstransfer.2021.121587 · DOI
  151. Xu, 2020, Experimental investigation of closed loop spray cooling with micro- and hybrid micro-/nano-engineered surfaces, Appl. Therm. Eng., 180, 10.1016/j.applthermaleng.2020.115697 · doi:10.1016/j.applthermaleng.2020.115697
  152. Zhou, 2019, Heat transfer enhancement due to surface modification in the close-loop R410A flash evaporation spray cooling, Int. J. Heat Mass Transf., 139, 1047, 10.1016/j.ijheatmasstransfer.2019.05.063 · doi:10.1016/j.ijheatmasstransfer.2019.05.063
  153. Singh, 2023, Experimental investigations on heat transfer enhancement of enhanced surfaces in spray cooling using HFE-649, Int. J. Multiph. Flow, 161, 10.1016/j.ijmultiphaseflow.2023.104387 · doi:10.1016/j.ijmultiphaseflow.2023.104387
  154. Zhou, 2023, Enhancement of heat transfer on micro- and macro- structural surfaces in close-loop R410A flashing spray cooling system for heat dissipation of high-power electronics, Appl. Therm. Eng., 223, 10.1016/j.applthermaleng.2023.119978 · doi:10.1016/j.applthermaleng.2023.119978
  155. Lin, 2023, Effects of wide-range copper surface wettability on spray cooling heat transfer, Exp. Therm Fluid Sci., 143, 10.1016/j.expthermflusci.2022.110834 · doi:10.1016/j.expthermflusci.2022.110834
  156. Cheng, 2016, Spray cooling and flash evaporation cooling: The current development and application, Renew. Sustain. Energy Rev., 55, 614, 10.1016/j.rser.2015.11.014 · DOI · Paper page
  157. Smith, 2023, Promoting fountain behaviors with cone surface structures under impinging jets, Appl. Therm. Eng., 232, 10.1016/j.applthermaleng.2023.120888 · doi:10.1016/j.applthermaleng.2023.120888
  158. Ikhlaq, 2020, Nozzle exit conditions and the heat transfer in non-swirling and weakly swirling turbulent impinging jets, Heat Mass Transfer, 56, 269, 10.1007/s00231-019-02710-1 · DOI
  159. Devahdhanush, 2021, Review of Critical Heat Flux (CHF) in Jet Impingement Boiling, Int. J. Heat Mass Transf., 169
  160. Di Zhang, 2022, Hu, Flow Characteristics of Oblique Submerged Impinging Jet at Various Impinging Heights, JMSE, 10, 399, 10.3390/jmse10030399 · doi:10.3390/jmse10030399
  161. Yang, 2023, Comparative study on flow and heat transfer characteristics of swirling impingement jet issuing from different nozzles, Int. J. Therm. Sci., 184, 10.1016/j.ijthermalsci.2022.107914 · doi:10.1016/j.ijthermalsci.2022.107914
  162. Kotb, 2023, On the impingement of heat transfer using swirled air jets, Front. Mech. Eng., 9, 10.3389/fmech.2023.1120985 · doi:10.3389/fmech.2023.1120985
  163. Devahdhanush, 2021, Critical Heat Flux of Confined Round Single Jet and Jet Array Impingement Boiling, Int. J. Heat Mass Transf., 169
  164. Ekkad, 2021, A Modern Review on Jet Impingement Heat Transfer Methods, J. Heat Transfer, 143, 10.1115/1.4049496 · doi:10.1115/1.4049496
  165. San, 2014, Effects of jet-to-jet spacing and jet height on heat transfer characteristics of an impinging jet array, Int. J. Heat Mass Transf., 71, 8, 10.1016/j.ijheatmasstransfer.2013.11.079 · doi:10.1016/j.ijheatmasstransfer.2013.11.079
  166. Plant, 2023, A review of jet impingement cooling, International Journal of Thermofluids, 17, 10.1016/j.ijft.2023.100312 · doi:10.1016/j.ijft.2023.100312
  167. Ja'fari, 2023, Synthetic jet actuators: Overview and applications, International Journal of Thermofluids, 20, 10.1016/j.ijft.2023.100438 · DOI
  168. Arumuru, 2023, A novel synthetic jet based heat sink with PCM filled cylindrical fins for efficient electronic cooling, J. Storage Mater., 58
  169. Mohammadpour, 2020, Investigation of nanoparticle effects on jet impingement heat transfer: A review, J. Mol. Liq., 316, 10.1016/j.molliq.2020.113819 · doi:10.1016/j.molliq.2020.113819
  170. Amjadian, 2020, Heat transfer characteristics of impinging jet on a hot surface with constant heat flux using Cu2O–water nanofluid: An experimental study, Int. Commun. Heat Mass Transfer, 112, 10.1016/j.icheatmasstransfer.2020.104509 · doi:10.1016/j.icheatmasstransfer.2020.104509
  171. Kaya, 2023, Experimental investigation of effect of iron oxide nanofluids with different morphology on heat transfer of multiple impinging jets, Exp. Heat Transfer, 36, 719, 10.1080/08916152.2023.2212671 · doi:10.1080/08916152.2023.2212671
  172. Fallahtafti, 2022, Shape optimization of hotspot targeted micro pin fins for heterogeneous integration applications, Int. J. Heat Mass Transf., 192, 10.1016/j.ijheatmasstransfer.2022.122897 · doi:10.1016/j.ijheatmasstransfer.2022.122897
  173. Radmard, 2021, Multi-objective optimization of a chip-attached micro pin fin liquid cooling system, Appl. Therm. Eng., 195, 10.1016/j.applthermaleng.2021.117187 · DOI
  174. Wiriyasart, 2020, Heat spreading of liquid jet impingement cooling of cold plate heat sink with different fin shapes, Case Studies in Thermal Engineering, 20, 10.1016/j.csite.2020.100638 · DOI
  175. Şeşen, 2013, Submerged jet impingement cooling using nanostructured plates, Int. J. Heat Mass Transf., 59, 414, 10.1016/j.ijheatmasstransfer.2012.12.039 · doi:10.1016/j.ijheatmasstransfer.2012.12.039
  176. Pandey, 2022, A descriptive review of the thermal transport mechanisms in mono and hybrid nanofluid-filled heat pipes and current developments, Therm. Sci. Eng. Prog., 31
  177. Naruka, 2020, Experimental inquisition of heat pipe: performance evaluation for different fluids, Exp. Heat Transfer, 33, 668, 10.1080/08916152.2020.1713254 · doi:10.1080/08916152.2020.1713254
  178. Gao, 2023, Application of nanofluids in heat pipes, J Therm Anal Calorim, 148, 5149, 10.1007/s10973-023-12115-2 · doi:10.1007/s10973-023-12115-2
  179. Ghorabaee, 2021, The use of nanofluids in thermosyphon heat pipe: A comprehensive review, Powder Technol., 394, 250, 10.1016/j.powtec.2021.08.045 · DOI
  180. Pastukhov, 2003, Miniature loop heat pipes for electronics cooling, Appl. Therm. Eng., 23, 1125, 10.1016/S1359-4311(03)00046-2 · doi:10.1016/s1359-4311(03)00046-2
  181. Eluru, 2021, Significance of Magnetic Nano Fluids in Pulsating Heat Pipes – A Review, Energy Sources Part A, 1, 10.1080/15567036.2021.1968075 · doi:10.1080/15567036.2021.1968075
  182. Pandya, 2021, Influence of the geometrical parameters and particle concentration levels of hybrid nanofluid on the thermal performance of axial grooved heat pipe, Therm. Sci. Eng. Prog., 21
  183. Guo, 2022, Effects of filling ratio, geometry parameters and coolant temperature on the heat transfer performance of a wraparound heat pipe, Appl. Therm. Eng., 200, 10.1016/j.applthermaleng.2021.117724 · doi:10.1016/j.applthermaleng.2021.117724
  184. Barba, 2021, Effects of filling ratio of a long cryogenic Pulsating Heat Pipe, Appl. Therm. Eng., 194, 10.1016/j.applthermaleng.2021.117072 · doi:10.1016/j.applthermaleng.2021.117072
  185. Szymanski, 2022, Current Trends in Wick Structure Construction in Loop Heat Pipes Applications: A Review, Materials, 15, 5765, 10.3390/ma15165765 · doi:10.3390/ma15165765
  186. Jiang, 2014, Fabrication and thermal performance of porous crack composite wick flattened heat pipe, Appl. Therm. Eng., 66, 140, 10.1016/j.applthermaleng.2014.01.034 · doi:10.1016/j.applthermaleng.2014.01.034
  187. Guangwen, 2021, Fabrication and capillary performance of a novel composite wick for ultra-thin heat pipes, Int. J. Heat Mass Transf., 176, 10.1016/j.ijheatmasstransfer.2021.121467 · doi:10.1016/j.ijheatmasstransfer.2021.121467
  188. Wu, 2023, Effect of PTFE wick thickness on Loop heat pipe performance, Therm. Sci. Eng. Prog., 42
  189. Yi, 2023, Experimental study on thermal performance of ultra-thin heat pipe with a novel composite wick structure, Int. J. Therm. Sci., 193, 10.1016/j.ijthermalsci.2023.108539 · doi:10.1016/j.ijthermalsci.2023.108539
  190. Liu, 2023, High-performance multi-morphology porous wick fabricated using a composite pore former, Int. Commun. Heat Mass Transfer, 148, 10.1016/j.icheatmasstransfer.2023.107019 · doi:10.1016/j.icheatmasstransfer.2023.107019
  191. Meng, 2023, Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing, Int. Commun. Heat Mass Transfer, 140, 10.1016/j.icheatmasstransfer.2022.106496 · doi:10.1016/j.icheatmasstransfer.2022.106496
  192. Gu, 2023, Enhancing heat transfer performance in 3D-printed integrated vapor chamber using composite structures, Appl. Therm. Eng., 234, 10.1016/j.applthermaleng.2023.121292 · doi:10.1016/j.applthermaleng.2023.121292
  193. Yun, 2024, Design and fabrication of heat pipes using additive manufacturing for thermal management, Appl. Therm. Eng., 236, 10.1016/j.applthermaleng.2023.121561 · doi:10.1016/j.applthermaleng.2023.121561
  194. Rajale, 2023, A review on the heat transfer performance of pulsating heat pipes, Aust. J. Mech. Eng., 21, 1658, 10.1080/14484846.2021.2024340 · doi:10.1080/14484846.2021.2024340
  195. Zhang, 2008, Advances and Unsolved Issues in Pulsating Heat Pipes, Heat Transfer Eng., 29, 20, 10.1080/01457630701677114 · doi:10.1080/01457630701677114
  196. Su, 2023, Recent advances in visualization of pulsating heat pipes: A review, Appl. Therm. Eng., 221, 10.1016/j.applthermaleng.2022.119867 · doi:10.1016/j.applthermaleng.2022.119867
  197. Yao, 2023, Effects of vibration conditions on thermo-hydrodynamic performances of oscillating heat pipes with various diameters, Int. Commun. Heat Mass Transfer, 149, 10.1016/j.icheatmasstransfer.2023.107118 · doi:10.1016/j.icheatmasstransfer.2023.107118
  198. Lee, 2018, Effects of the number of turns and the inclination angle on the operating limit of micro pulsating heat pipes, Int. J. Heat Mass Transf., 124, 1172, 10.1016/j.ijheatmasstransfer.2018.04.054 · doi:10.1016/j.ijheatmasstransfer.2018.04.054
  199. Frey, 2023, Experimental investigation of pulsating heat pipes with different evaporator roughness values, Appl. Therm. Eng., 233, 10.1016/j.applthermaleng.2023.120999 · doi:10.1016/j.applthermaleng.2023.120999
  200. Wang, 2024, Chaotic index analysis of ethanol-based graphene nanofluid pulsating heat pipe, Appl. Therm. Eng., 236, 10.1016/j.applthermaleng.2023.121870 · DOI

200 of 371 shown

Cited by

See all 243

Metadata

Authors
Li, Z., Luo, H., Jiang, Y., Liu, H., Xu, L., Cao, K., Wu, H., Gao, P., & Liu, H.
Venue
Applied Thermal Engineering
Publisher
Elsevier BV
Published
2024-08
Volume
251
Pages
123612
ISSN
1359-4311 (ISSN-L)
OpenAlex
W4399389540
Cited by
243
References
3
FWCI
32.74
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comprehensive review and future prospects on chip-scale thermal management: Core of data center’s thermal management. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2024.123612
The paper
Li, Z., Luo, H., Jiang, Y., Liu, H., Xu, L., Cao, K., Wu, H., Gao, P., & Liu, H. (2024). Comprehensive review and future prospects on chip-scale thermal management: Core of data center’s thermal management. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2024.123612

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.