CoChat

Synthesis and physico-chemical characteristics of nanosized particles produced by laser ablation of a nickel target in water

Open access
Mahfouz, R., Cadete Santos Aires, F.J., Brenier, A., Jacquier, B., Bertolini, J.C. · 2008 · Applied Surface Science
Cited by 71

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Abstract Ablation of Ni targets in water by laser impact (532 nm, 40 mJ/pulse, 10 Hz and 8 ns duration) focused on massive samples (∼2 mm diameter) generates colloids with fine nanoparticles. The amount of metal released in the solution (measured by mass loss of the target or ICP) was found to increase first linearly with time, but slower after 8 min of impact. The size distribution of the nanoparticles thus produced was measured (by TEM) to be in the range 3–5.3 nm in diameter, with a tendency for the size to be smaller for larger number of laser shots. Actually, nickel oxide nanoparticles were produced, rather than nickel nanoparticles as it was shown by HRTEM. XPS photoemission measurements evidenced the presence of nickel oxide species on the crater of the nickel sample surface after laser ablation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apsusc.2008.02.022

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Research works printed but not linked: 17

  1. Takagi, 1954, J. Phys. Soc. Jpn., 9, 359, 10.1143/JPSJ.9.359 · DOI · Paper page
  2. Sakurai, 1995, Appl. Catal. A. Gen., 127, 93, 10.1016/0926-860X(95)00058-5 · DOI · Paper page
  3. Sanchez, 1996, Appl. Phys. Lett., 68, 134, 10.1063/1.116780 · doi:10.1063/1.116780
  4. Wilcoxon, 1998, J. Chem. Phys., 108, 9137, 10.1063/1.476360 · DOI · Paper page
  5. Haruta, 1993, J. Catal., 144, 175, 10.1006/jcat.1993.1322 · DOI · Paper page
  6. Hwang, 2000, J. Catal., 195, 336, 10.1006/jcat.2000.2992 · DOI
  7. Kim, 2005, J. Mol. Catal. A: Chem., 226, 231, 10.1016/j.molcata.2004.10.038 · DOI
  8. Link, 2000, J. Phys. Chem. B, 104, 6152, 10.1021/jp000679t · DOI · Paper page
  9. Link, 1999, J. Phys. Chem. B, 103, 4212, 10.1021/jp984796o · DOI · Paper page
  10. Smakin, 2001, Chem. Phys. Lett., 348, 182, 10.1016/S0009-2614(01)01136-8 · DOI · Paper page
  11. Tarasenko, 2006, Appl. Surf. Sci., 252, 4439, 10.1016/j.apsusc.2005.07.150 · DOI
  12. Kawasaki, 2006, Appl. Surf. Sci., 253, 2208, 10.1016/j.apsusc.2006.04.024 · DOI
  13. Hwang, 2000, J. Catal., 195, 336, 10.1006/jcat.2000.2992 · DOI
  14. Kazakevich, 2007, Appl. Surf. Sci., 253, 7831, 10.1016/j.apsusc.2007.02.159 · DOI
  15. Liu, 2007, Appl. Phys. Lett., 90, 044103, 10.1063/1.2434168 · DOI · Paper page
  16. Kim, 1974, Surf. Sci., 43, 625, 10.1016/0039-6028(74)90281-7 · DOI · Paper page
  17. McIntyre, 1975, Anal. Chem., 47, 2208, 10.1021/ac60363a034 · DOI · Paper page

Cited by

Metadata

Authors
Mahfouz, R., Cadete Santos Aires, F. J., Brenier, A., Jacquier, B., & Bertolini, J. C.
Venue
Applied Surface Science
Publisher
Elsevier BV
Published
2008-06
Volume
254
Issue
16
Pages
5181-5190
ISSN
0169-4332 (ISSN-L)
OpenAlex
W1997433620
Cited by
71
References
7
FWCI
2.13
Type
journal article
Language
en
Open access
green
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.