The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation
Open accessAbstract
The aim of the present work was to investigate the possibility of using femtosecond laser surface texturing as a method to reduce the colonization of Grade 2 Titanium alloy surfaces by Staphylococcus aureus and the subsequent formation of biofilm. The laser treatments were carried out with a Yb:KYW chirped-pulse-regenerative amplification laser system with a central wavelength of 1030 nm and a pulse duration of 500 fs. Two types of surface textures, consisting of laser-induced periodic surface structures (LIPSS) and nanopillars, were produced. The topography, chemical composition and phase constitution of these surfaces were investigated by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, micro-Raman spectroscopy, and X-ray diffraction. Surface wettability was assessed by the sessile drop method using water and diiodomethane as testing liquids. The response of S. aureus put into contact with the laser treated surfaces in controlled conditions was investigated by epifluorescence microscopy and scanning electron microscopy 48 h after cell seeding. The results achieved show that the laser treatment reduces significantly the bacterial adhesion to the surface as well as biofilm formation as compared to a reference polished surfaces and suggest that femtosecond laser texturing is a simple and promising method for endowing dental and orthopedic titanium implants with antibacterial properties, reducing the risk of implant-associated infections without requiring immobilized antibacterial substances, nanoparticles or coatings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Simple technique for measurements of pulsed Gaussian-beam spot sizes
Liu, J. M. (1982) · Optics Letters · doi:10.1364/ol.7.000196 · Cited by 1,887
A review of the biomaterials technologies for infection-resistant surfaces
Campoccia, D., Montanaro, L., & Arciola, C. R. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.089 · Cited by 1,358
Direct femtosecond laser surface nano/microstructuring and its applications
Vorobyev, A. Y., & Guo, C. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201200017 · Cited by 1,172
Bacterial adhesion and biofilms on surfaces
Garrett, T. R., Bhakoo, M., & Zhang, Z. (2008) · Progress in Natural Science · doi:10.1016/j.pnsc.2008.04.001 · Cited by 1,129
The significance of infection related to orthopedic devices and issues of antibiotic resistance
Campoccia, D., Montanaro, L., & Arciola, C. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.044 · Cited by 1,109
The interaction of cells and bacteria with surfaces structured at the nanometre scale
Anselme, K., Davidson, P., Popa, A. M., Giazzon, M., Liley, M., & Ploux, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.04.001 · Cited by 827
Cheng, P., Li, D., Boruvka, L., Rotenberg, Y., & Neumann, A. W. (1990) · Colloids and Surfaces · doi:10.1016/0166-6622(90)80286-d · Cited by 532
Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser Ablation
Fadeeva, E., Truong, V. K., Stiesch, M., Chichkov, B. N., Crawford, R. J., Wang, J., & Ivanova, E. P. (2011) · Langmuir · doi:10.1021/la104607g · Cited by 440
The influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium
Truong, V. K., Lapovok, R., Estrin, Y. S., Rundell, S., Wang, J. Y., Fluke, C. J., Crawford, R. J., & Ivanova, E. P. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.071 · Cited by 438
Simchi, A., Tamjid, E., Pishbin, F., & Boccaccini, A. R. (2011) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2010.10.005 · Cited by 404
Staphylococci and implant surfaces: a review
Harris, L. G., & Richards, R. G. (2006) · Injury · doi:10.1016/j.injury.2006.04.003 · Cited by 385
Surface topographical factors influencing bacterial attachment
Crawford, R. J., Webb, H. K., Truong, V. K., Hasan, J., & Ivanova, E. P. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2012.06.015 · Cited by 384
Astagneau, P., Rioux, C., Golliot, F., & Brücker, G. (2001) · Journal of Hospital Infection · doi:10.1053/jhin.2001.1003 · Cited by 352
Microbial biofilm growth vs. tissue integration: “The race for the surface” experimentally studied
Subbiahdoss, G., Kuijer, R., Grijpma, D. W., van der Mei, H. C., & Busscher, H. J. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.12.011 · Cited by 304
Interaction of staphylococci with bone
Wright, J. A., & Nair, S. P. (2010) · International Journal of Medical Microbiology · doi:10.1016/j.ijmm.2009.10.003 · Cited by 255
Differential response of Staphylococci and osteoblasts to varying titanium surface roughness
Wu, Y., Zitelli, J. P., TenHuisen, K. S., Yu, X., & Libera, M. R. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.10.001 · Cited by 248
Tailoring the surface properties of Ti6Al4V by controlled chemical oxidation
Variola, F., Yi, J.-H., Richert, L., Wuest, J. D., Rosei, F., & Nanci, A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.11.040 · Cited by 238
Impact of Nanoscale Roughness of Titanium Thin Film Surfaces on Bacterial Retention
Ivanova, E. P., Truong, V. K., Wang, J. Y., Berndt, C. C., Jones, R. T., Yusuf, I. I., Peake, I., Schmidt, H. W., Fluke, C., Barnes, D., et al. (2010) · Langmuir · doi:10.1021/la902623c · Cited by 205
Laser-induced periodic surface structures: Fingerprints of light localization
Skolski, J. Z. P., Römer, G. R. B. E., Oboňa, J. V., Ocelík, V., Veld, A. J. H. I. ‘., & Hosson, J. T. M. D. (2012) · Physical Review B · doi:10.1103/physrevb.85.075320 · Cited by 159
Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers
Aguilar, C. A., Lu, Y., Mao, S. S., & Chen, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.053 · Cited by 157
Impact of Nanoscale Topography on Genomics and Proteomics of Adherent Bacteria
Rizzello, L., Sorce, B., Sabella, S., Vecchio, G., Galeone, A., Brunetti, V., Cingolani, R., & Pompa, P. P. (2011) · ACS Nano · doi:10.1021/nn102692m · Cited by 125
Short-range order in ultrathin film titanium dioxide studied by Raman spectroscopy
Yakovlev, V. V., Scarel, G., Aita, C. R., et al. (2000) · Applied Physics Letters · doi:10.1063/1.125953 · Cited by 82
Pichavant, L., Amador, G., Jacqueline, C., Brouillaud, B., Héroguez, V., & Durrieu, M. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.06.033 · Cited by 80
Self-citationGiordano, C., Saino, E., Rimondini, L., Pedeferri, M., Visai, L., Cigada, A., & Chiesa, R. (2011) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2011.07.054 · Cited by 70
Determination of irradiation parameters for laser-induced periodic surface structures
Eichstädt, J., Römer, G. R. B. E., & Veld, A. J. H. I. ‘. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.09.120 · Cited by 64
Staphylococcus aureus: The enduring pathogen in surgery
Humphreys, H. (2012) · The Surgeon · doi:10.1016/j.surge.2012.05.003 · Cited by 55
Staphylococcal and streptococcal infections
Török, M. E., & Day, N. (2013) · Medicine · doi:10.1016/j.mpmed.2013.10.016 · Cited by 29
Laser surface patterning using a Michelson interferometer and femtosecond laser radiation
Oliveira, V., Polushkin, N. I., Conde, O., & Vilar, R. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.03.024 · Cited by 27
Self-citation
Cited by
Bacterial biofilm formation on implantable devices and approaches to its treatment and prevention
Khatoon, Z., McTiernan, C. D., Suuronen, E. J., Mah, T.-F., & Alarcon, E. I. (2018) · Heliyon · doi:10.1016/j.heliyon.2018.e01067 · Cited by 1,187
Laser-Induced Periodic Surface Structures— A Scientific Evergreen
Bonse, J., Hohm, S., Kirner, S. V., Rosenfeld, A., & Kruger, J. (2017) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2016.2614183 · Cited by 907
Mechano-bactericidal actions of nanostructured surfaces
Linklater, D. P., Baulin, V. A., Juodkazis, S., Crawford, R. J., Stoodley, P., & Ivanova, E. P. (2021) · Nature Reviews Microbiology · doi:10.1038/s41579-020-0414-z · Cited by 578
Jaggessar, A., Shahali, H., Mathew, A., & Yarlagadda, P. K. D. V. (2017) · Journal of Nanobiotechnology · doi:10.1186/s12951-017-0306-1 · Cited by 441
Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review
Yang, K., Shi, J., Wang, L., Chen, Y., Liang, C., Yang, L., & Wang, L.-N. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.05.028 · Cited by 330
Metadata
- Authors
- Cunha, A., Elie, A.-M., Plawinski, L., Serro, A. P., Botelho do Rego, A. M., Almeida, A., Urdaci, M. C., Durrieu, M.-C., & Vilar, R.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 360
- Pages
- 485-493
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2194558241
- Cited by
- 290
- References
- 30
- FWCI
- 13.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.