The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters
Open accessAbstract
In this paper, 3D printing as a novel printing process was considered for deposition of polymers on synthetic fabrics to introduce more flexible, resource-efficient and cost effective textile functionalization processes than conventional printing process like screen and inkjet printing. The aim is to develop an integrated or tailored production process for smart and functional textiles which avoid unnecessary use of water, energy, chemicals and minimize the waste to improve ecological footprint and productivity. Adhesion of polymer and nanocomposite layers which were 3D printed directly onto the textile fabrics using fused deposition modeling (FDM) technique was investigated. Different variables which may affect the adhesion properties including 3D printing process parameters, fabric type and filler type incorporated in polymer were considered. A rectangular shape according to the peeling standard was designed as 3D computer-aided design (CAD) to find out the effect of the different variables. The polymers were printed in different series of experimental design: nylon on polyamide 66 (PA66) fabrics, polylactic acid (PLA) on PA66 fabric, PLA on PLA fabric, and finally nanosize carbon black/PLA (CB/PLA) and multi-wall carbon nanotubes/PLA (CNT/PLA) nanocomposites on PLA fabrics. The adhesion forces were quantified using the innovative sample preparing method combining with the peeling standard method. Results showed that different variables of 3D printing process like extruder temperature, platform temperature and printing speed can have significant effect on adhesion force of polymers to fabrics while direct 3D printing. A model was proposed specifically for deposition of a commercial 3D printer Nylon filament on PA66 fabrics. In the following, among the printed polymers, PLA and its composites had high adhesion force to PLA fabrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Zeng, W., Shu, L., Li, Q., Chen, S., Wang, F., & Tao, X. (2014) · Advanced Materials · doi:10.1002/adma.201400633 · Cited by 2,019
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Design and Analysis of Experiments
(2007) · Modern Engineering Statistics · doi:10.1002/9780470187548.ch12 · Cited by 1,424
Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications
(2010) · Wiley eBooks · doi:10.1002/9780470649848 · Cited by 1,058
Awaja, F., Gilbert, M., Kelly, G., Fox, B., & Pigram, P. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.007 · Cited by 928
95/04670 Carbon black science and technology
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)96467-q · Cited by 650
Carbon Black: Science and Technology
Donnet, J.-B., Bansal, R. C., & Wang, M.-J. (2018) · Routledge eBooks · doi:10.1201/9781315138763 · Cited by 495
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 256
Electrical conductivity of carbonaceous powders
Celzard, A., Marêché, J. F., Payot, F., & Furdin, G. (2002) · Carbon · doi:10.1016/s0008-6223(02)00196-3 · Cited by 255
Direct 3D printing of polymers onto textiles: experimental studies and applications
Pei, E., Shen, J., & Watling, J. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0126 · Cited by 240
Promising applications of graphene and graphene-based nanostructures
Nguyen, B. H., & Nguyen, V. H. (2016) · Advances in Natural Sciences: Nanoscience and Nanotechnology · doi:10.1088/2043-6262/7/2/023002 · Cited by 235
Eco-Challenges of Bio-Based Polymer Composites
Avella, M., Buzarovska, A., Errico, M. E., Gentile, G., & Grozdanov, A. (2009) · Materials · doi:10.3390/ma2030911 · Cited by 176
The role of diffusion phenomena in polymer-to-polymer adhesion
Voyutskii, S. S., & Vakula, V. L. (1963) · Journal of Applied Polymer Science · doi:10.1002/app.1963.070070207 · Cited by 161
Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites
Kuan, C., Kuan, H., Ma, C.-C. M., & Chen, C. (2007) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2007.10.060 · Cited by 152
Waterproof and durable screen printed silver conductive tracks on textiles
Yang, K., Torah, R. N., Wei, Y., Beeby, S., & Tudor, J. (2013) · Textile Research Journal · doi:10.1177/0040517513490063 · Cited by 139
Paul, G., Torah, R. N., Beeby, S., & Tudor, J. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.11.026 · Cited by 127
Electrical Conductive Textiles Obtained by Screen Printing
Kazanı, İ., Hertleer, C., Mey, G. D., Schwarz, A., Guxho, G., & Langenhove, L. V. (2012) · Ghent University Academic Bibliography (Ghent University) · Cited by 107
An investigation into the durability of screen-printed conductive tracks on textiles
Paul, G., Torah, R. N., Yang, K., Beeby, S., & Tudor, J. (2014) · Measurement Science and Technology · doi:10.1088/0957-0233/25/2/025006 · Cited by 62
Chua, C. K. (1997) · Cited by 39
Multicomponent Polymeric Materials
Kim, J., Thomas, S., & Saha, P. (2016) · Springer series in materials science · doi:10.1007/978-94-017-7324-9 · Cited by 32
Cited by
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Metadata
- Authors
- Hashemi Sanatgar, R., Campagne, C., & Nierstrasz, V.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 403
- Pages
- 551-563
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2576659355
- Cited by
- 368
- References
- 20
- FWCI
- 23.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.