Synthesis, characterization of carbon adsorbents derived from waste biomass and its application to CO2 capture
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Abstract Waste Entada Rheedii shell (ERS) was used for the preparation of biochar-based adsorbents for CO2 capture at ambient conditions. Three types of adsorbents were prepared by treating ERS with acid, base and neutral condition. The physico-chemical properties of synthesized carbons were derived by X-ray diffraction, N2 adsorption, Fourier-transform infrared spectroscopy, 13C-Nuclear magnetic resonance spectroscopy, Laser Raman, Field emission scanning electron microscopy (FESEM), CHNS elemental and thermo gravimetric analysis. Characterization results indicated that the surface area and presence of basic sites in the carbon depended on the nature of pre-treatment of shell. The CO2 adsorption ability of the ERS derived carbons was tested at ambient temperatures. Carbon prepared after acid treatment showed superior CO2 adsorption capacity. The reasons for high CO2 adsorption behavior of the carbons were explained by its characteristics. The adsorption capacity in presence of moisture was also estimated. These carbon adsorbents also exhibited recyclability without any change in its adsorption capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Understanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
About reactions occurring during chemical activation with hydroxides
Lillo-Ródenas, M. A., Juan-Juan, J., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.008 · Cited by 389
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Yuan, X., Lee, J. G., Yun, H., Deng, S., Kim, Y. J., Lee, J. E., Kwak, S. K., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125350 · Cited by 194
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Improvement of CO2 uptake of activated carbons by treatment with mineral acids
Gęsikiewicz-Puchalska, A., Zgrzebnicki, M., Michalkiewicz, B., Narkiewicz, U., Morawski, A. W., & Wrobel, R. J. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.005 · Cited by 66
Cited by
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
Metadata
- Authors
- Mallesh, D., Anbarasan, J., Mahesh Kumar, P., Upendar, K., Chandrashekar, P., Rao, B. V. S. K., & Lingaiah, N.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 530
- Pages
- 147226
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W3043400768
- Cited by
- 70
- References
- 9
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.