The DOI matches its Crossref record; 360 of the 360 references it cites were found in a registry or an index.
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Abstract
As the global imperative to CO 2 emissions intensifies, carbon capture and storage (CCS) technologies, particularly CO 2 post-combustion capture, emerge as essential components in the transition toward a sustainable, low-carbon future. This review offers an exhaustive examination of the current state-of-the-art and recent advancements in CO 2 post-combustion capture techniques, including absorption, adsorption, membrane and cryogenic technologies. It presents an in-depth analysis aimed at understanding their relative efficiencies, challenges, and potentials in contributing to global CO 2 reduction goals. The review methodically evaluates each capture technique, starting with solvent-based absorption, which benefits from extensive research and industrial application but faces challenges, such as a high energy demand for solvent regeneration and environmental concerns. It then transitions to adsorption-based methods, highlighting their advantages in terms of energy efficiency, alongside the development of novel adsorbents that offer improved capacity and selectivity. Membrane technologies are also explored, with a focus on their potential for low-energy separation and the ongoing innovations aimed at enhancing their permeability and selectivity for CO 2 . Finally, cryogenic separation is discussed for its ability to achieve high-purity CO 2 capture through low-temperature processes, addressing specific operational challenges. The review promotes a multidisciplinary approach that combines advancements in chemical engineering, materials science, and environmental policy to accelerate the deployment of efficient and cost-effective CO 2 post-combustion capture technologies. Specifically, it emphasizes the need for continued research/development and enhanced collaboration/innovation within the scientific community and industry players to address the scalability, economic viability, and environmental impact of these technologies, ensuring that they can effectively contribute to the decarbonization of the energy sector.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
How a century of ammonia synthesis changed the world
Erisman, J. W., Sutton, M. A., Galloway, J., Klimont, Z., & Winiwarter, W. (2008) · Nature Geoscience · doi:10.1038/ngeo325 · Cited by 4,607
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Cited by
Hanson, E., Nwakile, C., & Hammed, V. O. (2025) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100381 · Cited by 308
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Joarder, M. S. A., Islam, M. S., Hasan, M. H., Kutub, A., Kabir, M. F., Rashid, F., & Joarder, T. A. (2025) · Environmental Science and Pollution Research · doi:10.1007/s11356-025-36284-9 · Cited by 51
Dini, P., & Paolini, D. (2025) · Batteries · doi:10.3390/batteries11030107 · Cited by 40
Metadata
- Authors
- Raganati, F., & Ammendola, P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-07-15
- Volume
- 38
- Issue
- 15
- Pages
- 13858-13905
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W4400646404
- Cited by
- 296
- References
- 360
- FWCI
- 39.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions. https://app.cochat.ai/papers/10.1021/acs.energyfuels.4c02513
- The paper
- Raganati, F., & Ammendola, P. (2024). CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.4c02513
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.