Removal of Chromium(VI) from aqueous solution using guar gum–nano zinc oxide biocomposite adsorbent
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Guar gum–nano zinc oxide (GG/nZnO) biocomposite was used as an adsorbent for enhanced removal of Cr(VI) from aqueous solution. The maximum adsorption was achieved at 50 min contact time, 25 mg/L Cr(VI) conc., 1.0 g/L adsorbent dose and 7.0 pH. Langmuir, Freundlich, Dubinin–Kaganer–Radushkevich and Temkin isotherm models were used to interpret the experimental data. The data obeyed both Langmuir and Freundlich models (R2 = 0.99) indicating a multilayer adsorption of Cr(VI) onto the heterogeneous surface. The linear plots of Temkin isotherm showed adsorbent-adsorbate interactions. Moreover, the energy obtained from DKR isotherm (1.58–2.24 kJ/mol) indicated a physical adsorption of the metal ions onto the adsorbent surface, which implies more feasibility of the regeneration of the adsorbent. GG/nZnO biocomposite adsorbent showed an improved adsorption capacity for Cr(VI) (qm = 55.56 mg/g) as compared to other adsorbents reported in the literature. Adsorption process followed pseudo-second order kinetics; controlled by both liquid-film and intra-particle diffusion mechanisms. Thermodynamic parameters (ΔGo, ΔHo and ΔSo) reflected the feasibility, spontaneity and exothermic nature of adsorption. The results suggested that GG/nZnO biocomposite is economical, eco-friendly and capable to remove Cr(VI) from natural water resources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Advances in water treatment by adsorption technology
Ali, I., & Gupta, V. K. (2006) · Nature Protocols · doi:10.1038/nprot.2006.370 · Cited by 1,525
Self-citationChromium removal from water by activated carbon developed from waste rubber tires
Gupta, V. K., Ali, I., Saleh, T. A., Siddiqui, M. N., & Agarwal, S. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-012-0950-9 · Cited by 429
Self-citation
Cited by
Prasad, S., Yadav, K. K., Kumar, S., Gupta, N., Cabral-Pinto, M. M. S., Rezania, S., Radwan, N., & Alam, J. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.112174 · Cited by 744
Nasrollahzadeh, M., Sajjadi, M., Iravani, S., & Varma, R. S. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116986 · Cited by 718
Guar gum and its composites as potential materials for diverse applications: A review
Sharma, G., Sharma, S., Kumar, A., Al-Muhtaseb, A. H., Naushad, M., Ghfar, A. A., Mola, G. T., & Stadler, F. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.053 · Cited by 562
Self-citationWang, L., Shi, C., Wang, L., Pan, L., Zhang, X., & Zou, J.-J. (2020) · Nanoscale · doi:10.1039/c9nr09274a · Cited by 523
Environmental application of nanotechnology: air, soil, and water
Ibrahim, R. K., Hayyan, M., AlSaadi, M. A., Hayyan, A., & Ibrahim, S. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6457-z · Cited by 418
Somsesta, N., Sricharoenchaikul, V., & Aht-Ong, D. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122221 · Cited by 317
Environmental applications of chitosan and cellulosic biopolymers: A comprehensive outlook
Kanmani, P., Aravind, J., Kamaraj, M., Sureshbabu, P., & Karthikeyan, S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.03.119 · Cited by 316
Xanthan gum-derived materials for applications in environment and eco-friendly materials: A review
Abu Elella, M. H., Goda, E. S., Gab-Allah, M. A., Hong, S. E., Pandit, B., Lee, S., Gamal, H., Rehman, A. U., & Yoon, K. R. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104702 · Cited by 283
Removal of hexavalent chromium from aqueous solutions by adsorption on modified groundnut hull
Owalude, S. O., & Tella, A. C. (2016) · Beni-Suef University Journal of Basic and Applied Sciences · doi:10.1016/j.bjbas.2016.11.005 · Cited by 158
Metadata
- Authors
- Khan, T. A., Nazir, M., Ali, I., & Kumar, A.
- Venue
- Arabian Journal of Chemistry
- Publisher
- Scientific Scholar
- Published
- 2017-05
- Volume
- 10
- Pages
- S2388-S2398
- ISSN
- 1878-5352 (ISSN-L)
- OpenAlex
- W2036771412
- Cited by
- 207
- References
- 3
- FWCI
- 5.75
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.