The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Open accessAbstract
The utilisation of automation technology and processes control found in the automotive and aerospace industries is not paralleled in modern day construction. The industry also struggles to improve health and safety issues and still uses traditional methods of procurement. These problems are compounded by the diminishing skills in the labour force. Methods of production must change if these issues are to be resolved. Rapid Manufacturing is a family of digitally controlled additive processes that have the potential to impact on construction processes. This paper outlines some of the major issues facing construction technology and gives examples of the use of large scale Digital Fabrication in the industry. The term ‘Freeform Construction’ is defined. Potential applications derived from an industrial workshop are presented and results from a series of preliminary studies indicate the viability of mega-scale Rapid Manufacturing for construction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Proceedings of the Institution of Mechanical Engineers
(1987) · Computer-Aided Design · doi:10.1016/0010-4485(87)90099-6 · Cited by 1,329
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Analysis of rapid manufacturing—using layer manufacturing processes for production
Hopkinson, N., & Dicknes, P. (2003) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/095440603762554596 · Cited by 412
Exploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
(2011) · Making Sense of Construction Improvement · doi:10.1002/9781444341102.ch5 · Cited by 314
THE RECLAIMED AND RECYCLED CONSTRUCTION MATERIALS HANDBOOK
Coventry, S., Woolveridge, C., & Hillier, S. (1999) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 65
Self-contained automated construction deposition system
Williams, R. L., Albus, J. S., & Bostelman, R. V. (2004) · Automation in Construction · doi:10.1016/j.autcon.2004.01.001 · Cited by 24
Experiences with the construction of a building assembly robot
Leyh, W. (1995) · Automation in Construction · doi:10.1016/0926-5805(94)00034-k · Cited by 20
Cited by
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Self-citationMix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Self-citationVision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Self-citationA critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Metadata
- Authors
- Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2007-03
- Volume
- 16
- Issue
- 2
- Pages
- 224-231
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W1968939492
- Cited by
- 536
- References
- 8
- FWCI
- 14.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.