The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Large-scale 3D printing by a team of mobile robots
Abstract
Abstract Scalability is a problem common to most existing 3D printing processes, where the size of the design is strictly constrained by the chamber volume of the 3D printer. This issue is more pronounced in the building and construction industry, where it is impractical to have printers that are larger than actual buildings. One workaround consists in printing smaller pieces, which can then be assembled on-site. This workaround generates however additional design and process complexities, as well as creates potential weaknesses at the assembly interfaces. In this paper, we propose a 3D printing system that employs multiple mobile robots printing concurrently a large, single-piece, structure. We present our system in detail, and report simulation and experimental results. To our knowledge, this is the first physical demonstration of large-scale, concurrent, 3D printing of a concrete structure by multiple mobile robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential Monte Carlo Methods in Practice
(2001) · Springer eBooks · doi:10.1007/978-1-4757-3437-9 · Cited by 7,366
LaValle, S. M. (2006) · Cambridge University Press eBooks · doi:10.1017/cbo9780511546877 · Cited by 5,211
LaValle, S. M. (2006) · Cited by 4,177
Past, Present, and Future of Simultaneous Localization and Mapping: Toward the Robust-Perception Age
Cadena, C., Carlone, L., Carrillo, H., Latif, Y., Scaramuzza, D., Neira, J., Reid, I., & Leonard, J. J. (2016) · IEEE Transactions on Robotics · doi:10.1109/tro.2016.2624754 · Cited by 3,596
Past, present, and future of simultaneous localization and mapping: Toward the robust-perception age
Cadena, C., Carlone, L., Carrillo, H., Latif, Y., Scaramuzza, D., Neira, J., Reid, I. D., & Leonard, J. J. (2016) · Zurich Open Repository and Archive (University of Zurich) · doi:10.5167/uzh-138892 · Cited by 3,048
A solution to the simultaneous localization and map building (SLAM) problem
Dissanayake, M. W. M. G., Newman, P., Clark, S., Durrant-Whyte, H. F., & Csorba, M. (2001) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.938381 · Cited by 2,661
Automatic generation and detection of highly reliable fiducial markers under occlusion
Garrido-Jurado, S., Muñoz-Salinas, R., Madrid-Cuevas, F. J., & Marín-Jiménez, M. J. (2014) · Pattern Recognition · doi:10.1016/j.patcog.2014.01.005 · Cited by 2,604
Simultaneous localization and mapping (SLAM): part II
Bailey, T., & Durrant-Whyte, H. (2006) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2006.1678144 · Cited by 2,554
Improved Techniques for Grid Mapping With Rao-Blackwellized Particle Filters
Grisetti, G., Stachniss, C., & Burgard, W. (2007) · IEEE Transactions on Robotics · doi:10.1109/tro.2006.889486 · Cited by 2,439
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Cited by
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Davila Delgado, J. M., Oyedele, L., Ajayi, A., Akanbi, L., Akinade, O., Bilal, M., & Owolabi, H. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100868 · Cited by 607
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Craveiro, F., Duarte, J. P., Bartolo, H., & Bartolo, P. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.011 · Cited by 455
Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Metadata
- Authors
- Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q.-C.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 95
- Pages
- 98-106
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W2887785894
- Cited by
- 418
- References
- 39
- FWCI
- 25.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Large-scale 3D printing by a team of mobile robots. https://app.cochat.ai/papers/10.1016/j.autcon.2018.08.004
- The paper
- Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q.-C. (2018). Large-scale 3D printing by a team of mobile robots. Automation in Construction. https://doi.org/10.1016/j.autcon.2018.08.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.