The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds
Open accessAbstract
Biodegradable elastomeric scaffolds are of increasing interest for applications in soft tissue repair and regeneration, particularly in mechanically active settings. The rate at which such a scaffold should degrade for optimal outcomes, however, is not generally known and the ability to select from similar scaffolds that vary in degradation behavior to allow such optimization is limited. Our objective was to synthesize a family of biodegradable polyurethane elastomers where partial substitution of polyester segments with polycarbonate segments in the polymer backbone would lead to slower degradation behavior. Specifically, we synthesized poly(ester carbonate)urethane ureas (PECUUs) using a blended soft segment of poly(caprolactone) (PCL) and poly(1,6-hexamethylene carbonate) (PHC), a 1,4-diisocyanatobutane hard segment and chain extension with putrescine. Soft segment PCL/PHC molar ratios of 100/0, 75/25, 50/50, 25/75, and 0/100 were investigated. Polymer tensile strengths varied from 14-34 MPa with breaking strains of 660-875%, initial moduli of 8-24 MPa and 100% recovery after 10% strain. Increased PHC content was associated with softer, more distensible films. Scaffolds produced by salt leaching supported smooth muscle cell adhesion and growth in vitro. PECUU in aqueous buffer in vitro and subcutaneous implants in rats of PECUU scaffolds showed degradation slower than comparable poly(ester urethane)urea and faster than poly(carbonate urethane)urea. These slower degrading thermoplastic polyurethanes provide opportunities to investigate the role of relative degradation rates for mechanically supportive scaffolds in a variety of soft tissue repair and reconstructive procedures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A tough biodegradable elastomer
Wang, Y., Ameer, G. A., Sheppard, B. J., & Langer, R. (2002) · Nature Biotechnology · doi:10.1038/nbt0602-602 · Cited by 1,314 · cited 1×
“Commonly investigated biodegradable elatomers include poly(glycerol sebacate) [5,6],”
Santerre, J. P., Woodhouse, K., Laroche, G., & Labow, R. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.079 · Cited by 718
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355 · cited 1×
“poly(hydroxyalkanoate)s [7], poly(ether ester)s [3,8] and poly(trimethylene carbonate) based polymers [9,10] and polyurethanes [4,11].”
Skarja, G. A., & Woodhouse, K. A. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00659 · Cited by 173 · cited 1×
“In previous studies single component polyesters, such as PCL [14,21,33], poly(lactide) (PLA) [34] and poly(hydroxybutyrate) (PHB) [35], or polycarbonates, such as poly(1,6-hexyl 1,2-ethyl carbonate) [13,36,37], poly(1,6-hexamethylene carbonate) [38,39] and poly(1,3-trimethylene carbonate) (PTMC) [24,40], in the polyur…”
Spaans, C. J., Belgraver, V. W., Rienstra, O., de Groot, J. H., Veth, R. P. H., & Pennings, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00113-7 · Cited by 91
Cited by
Modeling physiological events in 2D vs. 3D cell culture
Duval, K., Grover, H., Han, L.-H., Mou, Y., Pegoraro, A. F., Fredberg, J., & Chen, Z. (2017) · Physiology · doi:10.1152/physiol.00036.2016 · Cited by 1,849
Degradation and stabilization of polyurethane elastomers
Xie, F., Zhang, T., Bryant, P., Kurusingal, V., Colwell, J. M., & Laycock, B. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.12.003 · Cited by 722
Elastomeric biomaterials for tissue engineering
Chen, Q., Liang, S., & Thouas, G. A. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.003 · Cited by 564
Biobased polyurethanes for biomedical applications
Wendels, S., & Avérous, L. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.002 · Cited by 379
Kluin, J., Talacua, H., Smits, A. I. P. M., Emmert, M. Y., Brugmans, M. C. P., Fioretta, E. S., Dijkman, P. E., Söntjens, S. H. M., Duijvelshoff, R., Dekker, S., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.007 · Cited by 268
Metadata
- Authors
- Hong, Y., Guan, J., Fujimoto, K. L., Hashizume, R., Pelinescu, A. L., & Wagner, W. R.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2010-05
- Volume
- 31
- Issue
- 15
- Pages
- 4249-4258
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2090378839
- Cited by
- 188
- References
- 5
- FWCI
- 5.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds. https://app.cochat.ai/papers/10.1016/j.biomaterials.2010.02.005
- The paper
- Hong, Y., Guan, J., Fujimoto, K. L., Hashizume, R., Pelinescu, A. L., & Wagner, W. R. (2010). Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds. Biomaterials. https://doi.org/10.1016/j.biomaterials.2010.02.005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.