The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Abstract
The technology employed for the preparation of tissue engineering scaffolds restricts the materials choice and the extent to which the architecture can be designed.Here we show the versatility of stereolithography with respect to materials and freedom of design.Porous scaffolds are designed with computer software and built with either a poly(D,L-lactide)-based resin or a poly(D,L-lactide-coε-caprolactone)-based resin.Characterisation of the scaffolds by micro computed tomography shows excellent reproduction of the designs.The mechanical properties are evaluated in compression, and show good agreement with finite element predictions.The mechanical properties of scaffolds can be controlled by the combination of material and scaffold pore architecture.The presented technology and materials enable an accurate preparation of tissue engineering scaffolds with a large freedom of design, and properties ranging from rigid and strong to highly flexible and elastic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials
Arruda, E. M., & Boyce, M. C. (1993) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(93)90013-6 · Cited by 3,239
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Biodegradable Polymer Scaffolds for Tissue Engineering
Freed, L. E., Vunjak-Novakovic, G., Biron, R. J., Eagles, D. B., Lesnoy, D. C., Barlow, S. K., & Langer, R. (1994) · Nature Biotechnology · doi:10.1038/nbt0794-689 · Cited by 1,235
Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model
Boyce, M. C., Parks, D. M., & Argon, A. S. (1988) · Mechanics of Materials · doi:10.1016/0167-6636(88)90003-8 · Cited by 1,110
Cell and molecular mechanics of biological materials
Bao, G., & Suresh, S. (2003) · Nature Materials · doi:10.1038/nmat1001 · Cited by 1,055
Sawhney, A. S., Pathak, C. P., & Hubbell, J. A. (1993) · Macromolecules · doi:10.1021/ma00056a005 · Cited by 974
Gesammelte Mathematische Abhandlungen: Erster Band
Schwarz, H. A. (1890) · Springer eBooks · doi:10.1007/978-3-642-50665-9 · Cited by 827
Infinite periodic minimal surfaces without self-intersections
Schoen, A. H. (1970) · NASA Technical Reports Server (NASA) · Cited by 827
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Osteochondral tissue engineering
Martin, I., Miot, S., Barbero, A., Jakob, M., & Wendt, D. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.03.008 · Cited by 378
Experimental measurement of the photonic properties of icosahedral quasicrystals
Man, W., Megens, M., Steinhardt, P. J., & Chaikin, P. M. (2005) · Nature · doi:10.1038/nature03977 · Cited by 243
Polymer Networks with Grafted Cell Adhesion Peptides for Highly Biospecific Cell Adhesive Substrates
Drumheller, P. D., & Hubbell, J. A. (1994) · Analytical Biochemistry · doi:10.1006/abio.1994.1506 · Cited by 191
Maruo, S., & Ikuta, K. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00043-2 · Cited by 151
Prediction of the Optimal Mechanical Properties for a Scaffold Used in Osteochondral Defect Repair
Kelly, D. J., & Prendergast, P. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2509 · Cited by 147
Антонов, Е. Н., Bagratashvili, V. N., Whitaker, M. J., Barry, J. J. A., Shakesheff, K. M., Коновалов, А. Н., Popov, V. K., & Howdle, S. M. (2004) · Advanced Materials · doi:10.1002/adma.200400838 · Cited by 136
Improved Left Ventricular Aneurysm Repair With Bioengineered Vascular Smooth Muscle Grafts
Matsubayashi, K., Fedak, P. W. M., Mickle, D. A. G., Weisel, R. D., Ozawa, T., & Li, R. (2003) · Circulation · doi:10.1161/01.cir.0000087450.34497.9a · Cited by 109
Cross‐Linked Poly( ε ‐caprolactone/ D , L ‐lactide) Copolymers with Elastic Properties
Helminen, A. O., Korhonen, H., & Seppälä, J. V. (2002) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200290039 · Cited by 95
Synthetic scaffold morphology controls human dermal connective tissue formation
Wang, H., Pieper, J., Péters, F. L. A. M. A., van Blitterswijk, C., & Lamme, E. N. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30232 · Cited by 92
Synthesis of bioabsorbable networks from methacrylate-endcapped polyesters
Storey, R. F., Warren, S. C., Allison, C. J., Wiggins, J. S., & Puckett, A. D. (1993) · Polymer · doi:10.1016/0032-3861(93)90203-m · Cited by 91
Cited by
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Self-citationPrinting and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Metadata
- Authors
- Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2010-09
- Volume
- 31
- Issue
- 27
- Pages
- 6909-6916
- ISSN
- 0142-9612
- OpenAlex
- W2109520485
- Cited by
- 530
- References
- 27
- FWCI
- 10.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.