The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Thermal behaviour and kinetics of coal/biomass blends during co-combustion
Open accessAbstract
The thermal characteristics and kinetics of coal, biomass (pine sawdust) and their blends were evaluated under combustion conditions using a non-isothermal thermogravimetric method (TGA). Biomass was blended with coal in the range of 5-80 wt.% to evaluate their co-combustion behaviour. No significant interactions were detected between the coal and biomass, since no deviations from their expected behaviour were observed in these experiments. Biomass combustion takes place in two steps: between 200 and 360 degrees C the volatiles are released and burned, and at 360-490 degrees C char combustion takes place. In contrast, coal is characterized by only one combustion stage at 315-615 degrees C. The coal/biomass blends presented three combustion steps, corresponding to the sum of the biomass and coal individual stages. Several solid-state mechanisms were tested by the Coats-Redfern method in order to find out the mechanisms responsible for the oxidation of the samples. The kinetic parameters were determined assuming single separate reactions for each stage of thermal conversion. The combustion process of coal consists of one reaction, whereas, in the case of the biomass and coal/biomass blends, this process consists of two or three independent reactions, respectively. The results showed that the chemical first order reaction is the most effective mechanism for the first step of biomass oxidation and for coal combustion. However, diffusion mechanisms were found to be responsible for the second step of biomass combustion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860
Munir, S., Daood, S. S., Nimmo, W., Cunliffe, A. M., & Gibbs, B. M. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.07.065 · Cited by 551
Biomass cofiring: the technology, the experience, the combustion consequences
Tillman, D. A. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00049-0 · Cited by 536
Pyrolysis characteristics and kinetics of biomass residuals mixtures with lignite☆
Vamvuka, D., Kakaras, E., Kastanaki, E., & Grammelis, P. (2003) · Fuel · doi:10.1016/s0016-2361(03)00153-4 · Cited by 514
Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysis
Zhou, L., Wang, Y., Huang, Q., & Cai, J. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.07.002 · Cited by 349
Kinetic study on thermal decomposition of woods in oxidative environment
Shen, D. K., Gu, S., Luo, K. H., Bridgwater, A. V., & Fang, M. X. (2009) · Fuel · doi:10.1016/j.fuel.2008.10.034 · Cited by 309
Yorulmaz, S. Y., & Atimtay, A. T. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.02.010 · Cited by 270
Thermogravimetric studies of the behavior of wheat straw with added coal during combustion
Wang, C., Wang, F., Yang, Q., & Liang, R. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.04.013 · Cited by 262
Devolatilization rate of biomasses and coal–biomass blends: an experimental investigation
Biagini, E., Lippi, F., Petarca, L., & Tognotti, L. (2002) · Fuel · doi:10.1016/s0016-2361(01)00204-6 · Cited by 255
A Comparative Reactivity and Kinetic Study on the Combustion of Coal-Biomass Char Blends
KASTANAKI, E., & VAMVUKA, D. (2006) · Fuel · doi:10.1016/j.fuel.2005.11.004 · Cited by 220
Combustion characteristics of different biomass materials
Haykırı-Açma, H. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00200-x · Cited by 212
Cai, J., Wang, Y., Zhou, L., & Huang, Q. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.06.006 · Cited by 209
Thermogravimetric studies of the behavior of lignite–biomass blends during devolatilization
Kastanaki, E., Vamvuka, D., Grammelis, P., & Kakaras, E. C. (2002) · Fuel Processing Technology · doi:10.1016/s0378-3820(02)00049-8 · Cited by 198
Kinetic modeling of thermal decomposition of natural cellulosic materials in air atmosphere
Liu, N., Fan, W., Dobashi, R., & Huang, L. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00161-9 · Cited by 157
05/00491 Thermogravimetry as a tool to classify waste components to be used for energy generation
(2005) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(05)80492-8 · Cited by 150
Modelling of pyrolysis of coal–biomass blends using thermogravimetric analysis
Sadhukhan, A. K., Gupta, P., Goyal, T., & Saha, R. K. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.03.047 · Cited by 145
Thermal events occurring during the combustion of biomass residue
(2002) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(02)80439-8 · Cited by 139
The thermogravimetric behaviour of coal
Cumming, J. W., & McLaughlin, J. (1982) · Thermochimica Acta · doi:10.1016/0040-6031(82)80037-3 · Cited by 119
Global degradation kinetics of pine needles in air
Safi, M., Mishra, I. M., & Prasad, B. (2003) · Thermochimica Acta · doi:10.1016/j.tca.2003.09.017 · Cited by 118
Effect of co-combustion on the burnout of lignite/biomass blends: A Turkish case study
Haykiri-Acma, H., & Yaman, S. (2007) · Waste Management · doi:10.1016/j.wasman.2007.08.028 · Cited by 113
Kinetic study for the thermal decomposition of cellulose and pine sawdust in an air atmosphere
Bilbao, R., Mastral, J. F., Aldea, M. E., & Ceamanos, J. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00957-6 · Cited by 110
Global interinsic kinetics of wood oxidation
Branca, C., & Blasi, C. D. (2003) · Fuel · doi:10.1016/s0016-2361(03)00220-5 · Cited by 102
Pyrolysis and combustion behaviour of coal–MBM blends
Skodras, G., Grammelis, P., & Basinas, P. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.007 · Cited by 89
Fitzpatrick, E. M., Bartle, K. D., Kubacki, M. L., Jones, J. M., Pourkashanian, M. M., Ross, A. B., Williams, A., & Kubica, K. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.037 · Cited by 83
A TG/DTA study on the effect of coal blending on ignition behaviour
Arenillas, A., Rubiera, F., Arias, B., Pis, J. J., Faundez-Baez, J. M., Gordon, A. L., & Garcı́a, X. (2004) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/b:jtan.0000028039.72613.73 · Cited by 81
Self-citationKinetic Modeling of Coal/Agricultural By-Product Blends
Vamvuka, D., Pasadakis, N., Kastanaki, E., Grammelis, P., & Kakaras, E. C. (2003) · Energy & Fuels · doi:10.1021/ef020179u · Cited by 78
A study of the self-heating of fresh and oxidized coals by differential thermal analysis
Pis, J., de la Puente, G., Fuente, E., Morán, A., & Rubiera, F. (1996) · Thermochimica Acta · doi:10.1016/s0040-6031(96)90066-0 · Cited by 74
Self-citationNon-isothermal versus isothermal technique to evaluate kinetic parameters of coal pyrolysis
Lázaro, M. J., Moliner, R., & Suelves, I. (1998) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00083-7 · Cited by 61
Effect of the grinding behaviour of coal blends on coal utilisation for combustion
Rubiera, F., Arenillas, A., Fuente, E., et al. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00158-8 · Cited by 61
Self-citationModification of combustion behaviour and NO emissions by coal blending
Rubiera, F., Arenillas, A., Arias, B., & Pis, J. J. (2002) · Fuel Processing Technology · doi:10.1016/s0378-3820(02)00074-7 · Cited by 50
Self-citationDetermination of the kinetic parameters of oat straw using thermogravimetric analysis
Ghaly, A. E., Ergüdenler, A., & Taweel, A. M. A. (1993) · Biomass and Bioenergy · doi:10.1016/0961-9534(93)90041-2 · Cited by 19
Influence of biological desulphurisation on coal combustion performance
Rubiera, F., Morán, A., Martı́nez, O., Fuente, E., & Pis, J. J. (1997) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00025-8 · Cited by 18
Self-citation
Cited by
Syed-Hassan, S. S. A., Wang, Y., Hu, S., Su, S., & Xiang, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.262 · Cited by 641
Characterization of Spanish biomass wastes for energy use
García, R., Pizarro, C., Lavín, A. G., & Bueno, J. L. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.004 · Cited by 465
TG–FTIR and Py–GC/MS analysis on pyrolysis and combustion of pine sawdust
Gao, N., Li, A., Quan, C., Du, L., & Duan, Y. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.11.009 · Cited by 410
Coal–biomass co-combustion: An overview
Sahu, S. G., Chakraborty, N., & Sarkar, P. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.106 · Cited by 406
Peng, C., Zhai, Y., Zhu, Y., Xu, B., Wang, T., Li, C., & Zeng, G. (2016) · Fuel · doi:10.1016/j.fuel.2016.02.068 · Cited by 397
Metadata
- Authors
- Gil, M. V., Casal, D., Pevida, C., Pis, J. J., & Rubiera, F.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2010-07
- Volume
- 101
- Issue
- 14
- Pages
- 5601-5608
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W1973497326
- Cited by
- 540
- References
- 33
- FWCI
- 14.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.