The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Thermal behaviour and kinetics of coal/biomass blends during co-combustion
Open accessAbstract
The thermal characteristics and kinetics of coal, biomass (pine sawdust) and their blends were evaluated under combustion conditions using a non-isothermal thermogravimetric method (TGA). Biomass was blended with coal in the range of 5-80 wt.% to evaluate their co-combustion behaviour. No significant interactions were detected between the coal and biomass, since no deviations from their expected behaviour were observed in these experiments. Biomass combustion takes place in two steps: between 200 and 360 degrees C the volatiles are released and burned, and at 360-490 degrees C char combustion takes place. In contrast, coal is characterized by only one combustion stage at 315-615 degrees C. The coal/biomass blends presented three combustion steps, corresponding to the sum of the biomass and coal individual stages. Several solid-state mechanisms were tested by the Coats-Redfern method in order to find out the mechanisms responsible for the oxidation of the samples. The kinetic parameters were determined assuming single separate reactions for each stage of thermal conversion. The combustion process of coal consists of one reaction, whereas, in the case of the biomass and coal/biomass blends, this process consists of two or three independent reactions, respectively. The results showed that the chemical first order reaction is the most effective mechanism for the first step of biomass oxidation and for coal combustion. However, diffusion mechanisms were found to be responsible for the second step of biomass combustion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860
Munir, S., Daood, S. S., Nimmo, W., Cunliffe, A. M., & Gibbs, B. M. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.07.065 · Cited by 551
Biomass cofiring: the technology, the experience, the combustion consequences
Tillman, D. A. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00049-0 · Cited by 536
Pyrolysis characteristics and kinetics of biomass residuals mixtures with lignite☆
Vamvuka, D., Kakaras, E., Kastanaki, E., & Grammelis, P. (2003) · Fuel · doi:10.1016/s0016-2361(03)00153-4 · Cited by 514
Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysis
Zhou, L., Wang, Y., Huang, Q., & Cai, J. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.07.002 · Cited by 349
Kinetic study on thermal decomposition of woods in oxidative environment
Shen, D. K., Gu, S., Luo, K. H., Bridgwater, A. V., & Fang, M. X. (2009) · Fuel · doi:10.1016/j.fuel.2008.10.034 · Cited by 309
Yorulmaz, S. Y., & Atimtay, A. T. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.02.010 · Cited by 270
Thermogravimetric studies of the behavior of wheat straw with added coal during combustion
Wang, C., Wang, F., Yang, Q., & Liang, R. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.04.013 · Cited by 262
Devolatilization rate of biomasses and coal–biomass blends: an experimental investigation
Biagini, E., Lippi, F., Petarca, L., & Tognotti, L. (2002) · Fuel · doi:10.1016/s0016-2361(01)00204-6 · Cited by 255
Cited by
Syed-Hassan, S. S. A., Wang, Y., Hu, S., Su, S., & Xiang, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.262 · Cited by 641
Characterization of Spanish biomass wastes for energy use
García, R., Pizarro, C., Lavín, A. G., & Bueno, J. L. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.004 · Cited by 465
TG–FTIR and Py–GC/MS analysis on pyrolysis and combustion of pine sawdust
Gao, N., Li, A., Quan, C., Du, L., & Duan, Y. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.11.009 · Cited by 410
Coal–biomass co-combustion: An overview
Sahu, S. G., Chakraborty, N., & Sarkar, P. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.106 · Cited by 406
Peng, C., Zhai, Y., Zhu, Y., Xu, B., Wang, T., Li, C., & Zeng, G. (2016) · Fuel · doi:10.1016/j.fuel.2016.02.068 · Cited by 397
Idris, S. S., Rahman, N. A., & Ismail, K. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.07.065 · Cited by 337
Hydrothermal carbonization of tobacco stalk for fuel application
Cai, J., Li, B., Chen, C., Wang, J., Zhao, M., & Zhang, K. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.08.098 · Cited by 253
Hydrothermal Carbonization of Waste Biomass for Energy Generation
Liu, Z., & Balasubramanian, R. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.10.022 · Cited by 114
“A first-order kinetic reaction is the most frequently used assumption for solid fuel decomposition/combustion [6,9].”
BackgroundHadey, C., Allouch, M., Alami, M., Boukhlifi, F., & Loulidi, I. (2022) · The Scientific World Journal · doi:10.1155/2022/2554475 · Cited by 53
Zhang, X., Li, Y., Wang, M., Han, L., & Liu, X. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03754 · Cited by 37
Riva, L., Cardarelli, A., Andersen, G. J., Buø, T. V., Barbanera, M., Bartocci, P., Fantozzi, F., & Nielsen, H. K. (2020) · Fuel · doi:10.1016/j.fuel.2020.118395 · Cited by 27
Metadata
- Authors
- Gil, M. V., Casal, D., Pevida, C., Pis, J. J., & Rubiera, F.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2010-07
- Volume
- 101
- Issue
- 14
- Pages
- 5601-5608
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W1973497326
- Cited by
- 540
- References
- 33
- FWCI
- 14.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.