Development of a draft-tube airlift bioreactor for Botryococcus braunii with an optimized inner structure using computational fluid dynamics
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
The key parameters of the inner structure of a cylindrical airlift bioreactor, including the ratio of the cross-section area of the downcomer to the cross-section area of the riser, clearance from the upper edge of the draft tube to the water level, and clearance from the low edge of the draft tube to the bottom of the reactor, significantly affected the biomass production of Botryococcus braunii. In order to achieve high algal cultivation performance, the optimal structural parameters of the bioreactor were determined using computational fluid dynamics (CFD) simulation. The simulated results were validated by experimental data collected from the microalgal cultures in both 2 and 40-L airlift bioreactors. The CFD model developed in this study provides a powerful means for optimizing bioreactor design and scale-up without the need to perform numerous time-consuming bioreactor experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tubular photobioreactor design for algal cultures
Molina, E., Fernández, J., Acién, F. G., & Chisti, Y. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(01)00353-4 · Cited by 620
Microalgal bioreactors: Challenges and opportunities
Xu, L., Weathers, P. J., Xiong, X., & Liu, C. (2009) · Engineering in Life Sciences · doi:10.1002/elsc.200800111 · Cited by 387 · cited 1×
“Airlift reactors allow for rapid mixing while producing weak shear stress, which makes them suitable for microalgae cultures (Xu et al., 2009; Camacho et al., 2011; Luo and Al-Dahhan, 2004; Yu et al., 2009).”
BackgroundComparative evaluation of compact photobioreactors for large-scale monoculture of microalgae
Sánchez Mirón, A., Contreras Gómez, A., Garcı́a Camacho, F., Molina Grima, E., & Chisti, Y. (1999) · Journal of Biotechnology · doi:10.1016/s0168-1656(99)00079-6 · Cited by 352
Degen, J., Uebele, A., Retze, A., Schmid-Staiger, U., & Trösch, W. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(01)00350-9 · Cited by 290
Principles for attaining maximal microalgal productivity in photobioreactors: an overview
Richmond, A. (2004) · Asian Pacific Phycology in the 21st Century: Prospects and Challenges · doi:10.1007/978-94-007-0944-7_5 · Cited by 182
Barbosa, M. J., Janssen, M., Ham, N., Tramper, J., & Wijffels, R. H. (2003) · Biotechnology and Bioengineering · doi:10.1002/bit.10563 · Cited by 181 · cited 2×
“In order to provide sufficient light for microalgae, it is necessary to design and optimize the internal structural parameters of the airlift bioreactor to improve mixing, light penetration, and gas injection (Degen et al., 2001; Barbosa et al., 2003; Vega-Estrada et al., 2005).”
BackgroundPrinciples for attaining maximal microalgal productivity in photobioreactors: an overview
Richmond, A. (2004) · Hydrobiologia · doi:10.1023/b:hydr.0000020365.06145.36 · Cited by 167
Numerical investigation of hydrodynamic and mixing conditions in a torus photobioreactor
Pruvost, J., Pottier, L., & Legrand, J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.02.027 · Cited by 154 · cited 1×
“Light plays a significant role in the photoautotrophic cultivation of microalgae, and its availability in airlift bioreactors is influenced by the aeration rate, gas holdup, and the velocity of the liquid (Sanchez Miron et al., 1999; Li et al., 2011; Pruvost et al., 2006).”
BackgroundLuo, H., & Al‐Dahhan, M. H. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.10831 · Cited by 136
Photobioreactor scale-up for a shear-sensitive dinoflagellate microalga
Camacho, F. G., Rodríguez, J. J. G., Mirón, A. S., Belarbi, E. H., Chisti, Y., & Grima, E. M. (2011) · Process Biochemistry · doi:10.1016/j.procbio.2011.01.005 · Cited by 72 · cited 1×
“Airlift reactors allow for rapid mixing while producing weak shear stress, which makes them suitable for microalgae cultures (Xu et al., 2009; Camacho et al., 2011; Luo and Al-Dahhan, 2004; Yu et al., 2009).”
BackgroundA novel method using CFD to optimize the inner structure parameters of flat photobioreactors
Yu, G., Li, Y., Shen, G., Wang, W., Lin, C., Wu, H., & Chen, Z. (2009) · Journal of Applied Phycology · doi:10.1007/s10811-009-9407-z · Cited by 66
Cited by
Microalgae cultivation in photobioreactors: An overview of light characteristics
Wang, S., Stiles, A. R., Guo, C., & Liu, C. (2014) · Engineering in Life Sciences · doi:10.1002/elsc.201300170 · Cited by 169
Self-citationHuang, J., Li, Y., Wan, M., Yan, Y., Feng, F., Qu, X., Wang, J., Shen, G., Li, W., Fan, J., et al. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.134 · Cited by 134
Huang, J., Feng, F., Wan, M., Ying, J., Li, Y., Qu, X., Pan, R., Shen, G., & Li, W. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.067 · Cited by 102
Wang, L.-L., Tao, Y., & Mao, X.-Z. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.04.100 · Cited by 86
Simulation of algal photobioreactors: recent developments and challenges
Gao, X., Kong, B., & Vigil, R. D. (2018) · Biotechnology Letters · doi:10.1007/s10529-018-2595-3 · Cited by 60
Metadata
- Authors
- Xu, L., Liu, R., Wang, F., & Liu, C.-Z.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2012-09
- Volume
- 119
- Pages
- 300-305
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2030940543
- Cited by
- 52
- References
- 11
- FWCI
- 1.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.