Microwave-assisted co-pyrolysis of Chlorella vulgaris and wood sawdust using different additives
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The microwave-assisted co-pyrolysis of Chlorella vulgaris (CV), wood sawdust (WS) and their blends with additives were investigated. There was a higher liquid and solid yield with silicon carbide (SiC) than activated carbon (AC) in most of samples. Microwave-assisted pyrolysis with additives behaved a positive effect on deoxygenation and aromatization, but not apparent denitrification. With the increase of CV proportion, aromatic hydrocarbons decreased, but aliphatic hydrocarbons increased using AC. High selectivity of phenols was reached at the sample of WS (relative content as 43.6%) using SiC; High selectivity of alkenes was reached at the sample of CV (relative content as 31.2%) and alkanes at the blend sample of 70% CV and 30% WS (relative content as 9.45%). Bio-oil and biochar from microwave-assisted pyrolysis of WS had higher calorific value than that of CV both with AC and SiC. Calorific value of bio-oil decreased by 33.3% after mixing CV with WS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermochemical conversion of microalgal biomass into biofuels: A review
Chen, W.-H., Lin, B.-J., Huang, M.-Y., & Chang, J.-S. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.050 · Cited by 579
Volatile production from pyrolysis of cellulose, hemicellulose and lignin
Zhao, C., Jiang, E., & Chen, A. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.08.004 · Cited by 458
Pyrolysis of poplar wood sawdust by TG-FTIR and Py–GC/MS
Gu, X., Ma, X., Li, L., Liu, C., Cheng, K., & Li, Z. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.009 · Cited by 308
Self-citationEffects of feedstock characteristics on microwave-assisted pyrolysis – A review
Zhang, Y., Chen, P., Liu, S., Peng, P., Min, M., Cheng, Y., Anderson, E., Zhou, N., Fan, L., Liu, C., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.046 · Cited by 260
Fan, L., Chen, P., Zhang, Y., Liu, S., Liu, Y., Wang, Y., Dai, L., & Ruan, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.072 · Cited by 218
Fast microwave-assisted catalytic co-pyrolysis of microalgae and scum for bio-oil production
Xie, Q., Addy, M., Liu, S., Zhang, B., Cheng, Y., Wan, Y., Li, Y., Liu, Y., Lin, X., Chen, P., et al. (2015) · Fuel · doi:10.1016/j.fuel.2015.08.020 · Cited by 156
Salema, A. A., Ani, F. N., Mouris, J., & Hutcheon, R. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.06.006 · Cited by 91
Cited by
A review on the pyrolysis of algal biomass for biochar and bio-oil – Bottlenecks and scope
Sekar, M., Mathimani, T., Alagumalai, A., Chi, N. T. L., Duc, P. A., Bhatia, S. K., Brindhadevi, K., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119190 · Cited by 293
Algae as green energy reserve: Technological outlook on biofuel production
Anto, S., Mukherjee, S. S., Muthappa, R., Mathimani, T., Deviram, G., Kumar, S. S., Verma, T. N., & Pugazhendhi, A. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2019.125079 · Cited by 277
Fast microwave-assisted pyrolysis of wastes for biofuels production – A review
Zhang, Y., Cui, Y., Liu, S., Fan, L., Zhou, N., Peng, P., Wang, Y., Guo, F., Min, M., Cheng, Y., et al. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122480 · Cited by 214
Investigation on co-pyrolysis of lignocellulosic biomass and amino acids using TG-FTIR and Py-GC/MS
Chen, H., Xie, Y., Chen, W., Xia, M., Li, K., Chen, Z., Chen, Y., & Yang, H. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.06.010 · Cited by 161
Nzediegwu, C., Arshad, M., Ulah, A., Naeth, M. A., & Chang, S. X. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124282 · Cited by 154
Vijayaraghavan, K. (2019) · Environmental Technology Reviews · doi:10.1080/21622515.2019.1631393 · Cited by 146
“This is due to their inherent advantages such as uniform, selective and volumetric heating, enhanced energy efficiency and rapid rate of heating [18,19].”
Background
Metadata
- Authors
- Chen, L., Yu, Z., Xu, H., Wan, K., Liao, Y., & Ma, X.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 273
- Pages
- 34-39
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2899502040
- Cited by
- 87
- References
- 7
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.