The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
2D metal carbides and nitrides (MXenes) for sensors and biosensors
Abstract
MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti3C2X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Li, Y., Shao, H., Lin, Z., Lu, J., Liu, L., Duployer, B., Persson, P. O. Å., Eklund, P., Hultman, L., Li, M., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0657-0 · Cited by 1,657
Li, M., Lu, J., Luo, K., Li, Y., Chang, K., Chen, K., Zhou, J., Rosen, J., Hultman, L., Eklund, P., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00574 · Cited by 1,530
Two-Dimensional Ultrathin MXene Ceramic Nanosheets for Photothermal Conversion
Lin, H., Wang, X., Yu, L., Chen, Y., & Shi, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04339 · Cited by 1,314
Ten Years of Progress in the Synthesis and Development of MXenes
Naguib, M., Barsoum, M. W., & Gogotsi, Y. (2021) · Advanced Materials · doi:10.1002/adma.202103393 · Cited by 1,257
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Zhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Cited by
Azimzadeh, M., Khashayar, P., Mousazadeh, M., Daneshpour, M., Rostami, M., Goodlett, D. R., Manji, K., Fardindoost, S., Akbari, M., & Hoorfar, M. (2025) · Talanta · doi:10.1016/j.talanta.2025.127991 · Cited by 16
Metadata
- Authors
- Alwarappan, S., Nesakumar, N., Sun, D., Hu, T. Y., & Li, C.-Z.
- Venue
- Biosensors and Bioelectronics
- Publisher
- Elsevier BV
- Published
- 2022-06
- Volume
- 205
- Pages
- 113943
- ISSN
- 0956-5663 (ISSN-L)
- OpenAlex
- W4206101587
- Cited by
- 262
- References
- 119
- FWCI
- 15.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 2D metal carbides and nitrides (MXenes) for sensors and biosensors. https://app.cochat.ai/papers/10.1016/j.bios.2021.113943
- The paper
- Alwarappan, S., Nesakumar, N., Sun, D., Hu, T. Y., & Li, C.-Z. (2022). 2D metal carbides and nitrides (MXenes) for sensors and biosensors. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2021.113943
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.