Ultrasensitive strain sensors made from metal-coated carbon nanofiller/epoxy composites
Open accessThe DOI matches its Crossref record.
Abstract
A set of resistance-type strain sensors has been fabricated from metal-coated carbon nanofiller (CNF)/epoxy composites. Two nanofillers, i.e., multi-walled carbon nanotubes and vapor growth carbon fibers (VGCFs) with nickel, copper and silver coatings were used. The ultrahigh strain sensitivity was observed in these novel sensors as compared to the sensors made from the CNFs without metal-coating, and conventional strain gauges. In terms of gauge factor, the sensor made of VGCFs with silver coating is estimated to be 155, which is around 80 times higher than that in a metal-foil strain gauge. The possible mechanism responsible for the high sensitivity and its dependence with the networks of the CNFs with and without metal-coating and the geometries of the CNFs were thoroughly investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Recent Progress in Electronic Skin
Wang, X., Dong, L., Zhang, H., Yu, R., Pan, C., & Wang, Z. L. (2015) · Advanced Science · doi:10.1002/advs.201500169 · Cited by 976
Carbonized Cotton Fabric for High‐Performance Wearable Strain Sensors
Zhang, M., Wang, C., Wang, H., Jian, M., Hao, X., & Zhang, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604795 · Cited by 515
Zhao, S., Li, J., Cao, D., Zhang, G., Li, J., Li, K., Yang, Y., Wang, W., Jin, Y., Sun, R., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13800 · Cited by 443
Flexible Carbon Nanotube Films for High Performance Strain Sensors
Kanoun, O., Müller, C., Benchirouf, A., Sanli, A., Dinh, T., Al-Hamry, A., Bu, L., Gerlach, C., & Bouhamed, A. (2014) · Sensors · doi:10.3390/s140610042 · Cited by 315
Carbon Nanofiber-Based Functional Nanomaterials for Sensor Applications
Wang, Z., Wu, S., Wang, J., Yu, A., & Wei, G. (2019) · Nanomaterials · doi:10.3390/nano9071045 · Cited by 187
“The as-prepared Ag-coated CNFs/epoxy composite shows higher strain sensitivity and better conductivity than that of CNFs without Ag-coating, and has a gauge factor of 155, this value is ~80 times higher than that in a metal-foil strain gauge [65].”
BackgroundA hierarchically structured graphene foam and its potential as a large-scale strain-gauge sensor
Kuang, J., Liu, L., Gao, Y., Zhou, D., Chen, Z., Han, B., & Zhang, Z. (2013) · Nanoscale · doi:10.1039/c3nr03379a · Cited by 185
Metadata
- Authors
- Hu, N., Itoi, T., Akagi, T., Kojima, T., Xue, J., Yan, C., Atobe, S., Fukunaga, H., Yuan, W., Ning, H., Surina, Liu, Y., & Alamusi
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2013-01
- Volume
- 51
- Pages
- 202-212
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W1486166781
- Cited by
- 127
- References
- 0
- FWCI
- 3.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.