The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains
Open accessAbstract
We report on the modification of graphene oxide (GO) with poly(vinyl alcohol) (PVA) leading to the mechanical improvement of GO based materials. First, GO was covalently functionalised with PVA by esterification of carboxylic groups on GO with hydroxyl groups of PVA resulting in functionalised f-(PVA)GO. This was carried out for PVA of six different molecular weights. This functionalised graphene oxide could be formed into a paper-like material by vacuum filtration. Papers prepared from f-(PVA)GO showed significant increases in mechanical properties compared to those prepared with GO or with simple mixtures of GO and PVA. The best performance was achieved for PVA functional groups with molecular weights between 50 and 150 kg/mol. Improvements in Young’s moduli of 60% and tensile strength of 400% were observed relative to GO-only paper. The improved mechanical properties are attributed to enhanced inter-flake stress transfer due to the covalently bonded PVA. Second, functionalised f-(PVA)GO was used as filler in PVA-based composites. The application of a pre-selection method allowed the use of only the largest functionalised f-(PVA)GO flakes. This resulted in substantially reinforced PVA–f-(PVA)GO composites. Both modulus and strength increased by 40% relative to the pure polymer for f-(PVA)GO loadings below 0.3 vol.%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979 · cited 1×
“Graphene has generated intense excitement in recent years due to its remarkable properties [1,2].”
BackgroundPreparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Intermolecular and Surface Forces
(2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10024-6 · Cited by 16,923
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922 · cited 2×
“In fact much work has already been done [5–7] showing that graphene and graphene oxide (GO) [8,9] are potentially effective reinforcements [10–19].”
BackgroundImproved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Self-citation
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Wan, Y.-J., Tang, L.-C., Gong, L.-X., Yan, D., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.050 · Cited by 788
Gas barrier performance of graphene/polymer nanocomposites
Cui, Y., Kundalwal, S. I., & Kumar, S. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.018 · Cited by 715
Punetha, V. D., Rana, S., Yoo, H. J., Chaurasia, A., McLeskey, J. T., Ramasamy, M. S., Sahoo, N. G., & Cho, J. W. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.010 · Cited by 656
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide
Wan, Y.-J., Gong, L.-X., Tang, L.-C., Wu, L.-B., & Jiang, J.-X. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.023 · Cited by 635
A manufacturing perspective on graphene dispersions
Johnson, D. W., Dobson, B. P., & Coleman, K. S. (2015) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2015.11.004 · Cited by 440
General overview of graphene: Production, properties and application in polymer composites
Phiri, J., Gane, P., & Maloney, T. C. (2017) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2016.10.004 · Cited by 427
Kumar, A., Sharma, K., & Dixit, A. R. (2021) · Carbon Letters · doi:10.1007/s42823-020-00161-x · Cited by 355
Aziz, S. B. (2016) · Journal of Electronic Materials · doi:10.1007/s11664-015-4191-9 · Cited by 294
Recent advances in the synthesis and applications of graphene–polymer nanocomposites
Zhang, M., Li, Y., Su, Z., & Wei, G. (2015) · Polymer Chemistry · doi:10.1039/c5py00777a · Cited by 277
Singh, B. P., Jena, B. K., Bhattacharjee, S., & Besra, L. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.06.004 · Cited by 266
Metadata
- Authors
- Cano, M., Khan, U., Sainsbury, T., O’Neill, A., Wang, Z., McGovern, I. T., Maser, W. K., Benito, A. M., & Coleman, J. N.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2013-02
- Volume
- 52
- Pages
- 363-371
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2135897506
- Cited by
- 282
- References
- 44
- FWCI
- 8.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.