Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Abstract Strong interface bonding and effective load-transfer are the guarantees for developing high strength metal matrix composites (MMCs). Herein, the effect of residual oxygen in functionalized carbon nanofillers (CNFs) on the interface structure and the synergistic strengthening behavior of carbon nanotube-reduced graphene oxide (CNT-RGO) hybrids were investigated in Cu matrix composites. It was demonstrated that disordered areas and Cu2O nanoparticles were in-situ formed at the CNF Cu interface in the oxygen-poor and oxygen-rich areas through diffusion of oxygen, respectively. Cu2O was grown from the Cu matrix by means of cube-on-cube to obtain the minimum interfacial energy, under which equivalent planes and directions of Cu2O and Cu matrix are matched across the Cu2O Cu interface. A possible formation/evolution mechanism of the disordered areas and Cu2O involving oxygen content and sintering temperature was proposed. The ultimate tensile strength of 412 MPa was achieved in 1.5 vol% CNT-RGO/Cu composite sintered at 1023 K, which is significantly higher than that of CNT/Cu and RGO/Cu composites (231 and 263 MPa, respectively). Synergistic strengthening effect of CNT-RGO hybrids was investigated and analyzed based on strengthening models, and the trade-off between Orowan strengthening and load-transfer effect in CNF/MMCs was discussed to understand the synergistic strengthening behavior of CNT-RGO hybrids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Tuinstra, F., & Koenig, J. L. (1970) · The Journal of Chemical Physics · doi:10.1063/1.1674108 · Cited by 10,717
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Mechanical Behavior of Materials
Meyers, M. A., & Chawla, K. K. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810947 · Cited by 3,376
Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum
Kelly, A., & Tyson, W. R. (1965) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(65)90035-9 · Cited by 2,479
Structural evolution during the reduction of chemically derived graphene oxide
Bagri, A., Mattevi, C., Acik, M., Chabal, Y. J., Chhowalla, M., & Shenoy, V. B. (2010) · Nature Chemistry · doi:10.1038/nchem.686 · Cited by 1,819
Langmuir−Blodgett Assembly of Graphite Oxide Single Layers
Cote, L. J., Kim, F., & Huang, J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja806262m · Cited by 1,750
Carbon nanotube reinforced metal matrix composites - a review
Bakshi, S. R., Lahiri, D., & Agarwal, A. (2010) · International Materials Reviews · doi:10.1179/095066009x12572530170543 · Cited by 1,446
Tjong, S. C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.08.001 · Cited by 1,155
An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites
Bakshi, S. R., & Agarwal, A. K. (2010) · Carbon · doi:10.1016/j.carbon.2010.09.054 · Cited by 505
Strengthening behavior of few-layered graphene/aluminum composites
Shin, S. E., Choi, H. J., Shin, J. H., & Bae, D. H. (2015) · Carbon · doi:10.1016/j.carbon.2014.10.044 · Cited by 477
Atomistic details of oxide surfaces and surface oxidation: the example of copper and its oxides
Gattinoni, C., & Michaelides, A. (2015) · Surface Science Reports · doi:10.1016/j.surfrep.2015.07.001 · Cited by 356
Graphene Oxide-Assisted Dispersion of Pristine Multiwalled Carbon Nanotubes in Aqueous Media
Zhang, C., Ren, L., Wang, X., & Liu, T. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp103745g · Cited by 348
Yang, M., Weng, L., Zhu, H., Fan, T., & Zhang, D. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.055 · Cited by 304
Sun, S., Zhang, X., Yang, Q., Liang, S., Zhang, X., & Yang, Z. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.03.006 · Cited by 283
Interface design of graphene/copper composites by matrix alloying with titanium
Chu, K., Wang, F., Wang, X.-H., Li, Y.-B., Geng, Z.-R., Huang, D.-J., & Zhang, H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.038 · Cited by 255
Chu, K., Wang, F., Li, Y.-B., Wang, X.-H., Huang, D.-J., & Geng, Z.-R. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.03.014 · Cited by 250
Interface structure and strengthening behavior of graphene/CuCr composites
Chu, K., Wang, F., Li, Y.-B., Wang, X.-H., Huang, D.-J., & Zhang, H. (2018) · Carbon · doi:10.1016/j.carbon.2018.03.018 · Cited by 250
Chu, K., Wang, J., Liu, Y.-P., & Geng, Z.-R. (2018) · Carbon · doi:10.1016/j.carbon.2018.08.004 · Cited by 229
Self-citationKim, K. T., Cha, S. I., Gemming, T., Eckert, J., & Hong, S. H. (2008) · Small · doi:10.1002/smll.200701223 · Cited by 208
Li, Z., Fan, G., Guo, Q., Li, Z., Su, Y., & Zhang, D. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.014 · Cited by 205
Strengthening effect of graphene derivatives in copper matrix composites
Zhang, D., & Zhan, Z. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.09.013 · Cited by 198
Palermo, V., Kinloch, I. A., Ligi, S., & Pugno, N. M. (2016) · Advanced Materials · doi:10.1002/adma.201505469 · Cited by 182
Zhang, X., Shi, C., Liu, E., He, F., Ma, L., Li, Q., Li, J., Bacsa, W., Zhao, N., & He, C. (2017) · Nanoscale · doi:10.1039/c6nr07335b · Cited by 174
LaGrow, A. P., Ward, M. R., Lloyd, D. C., Gai, P. L., & Boyes, E. D. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08842 · Cited by 162
Lateral size effect of graphene on mechanical properties of aluminum matrix nanolaminated composites
Zhao, M., Xiong, D., Tan, Z., Fan, G., Guo, Q., Guo, C., Li, Z., & Zhang, D. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.06.018 · Cited by 145
Yang, Z., Wang, L., Shi, Z., Wang, M., Cui, Y., Wei, B., Xu, S., Zhu, Y., & Fei, W. (2017) · Carbon · doi:10.1016/j.carbon.2017.10.095 · Cited by 136
Shuai, J., Xiong, L., Zhu, L. Z., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.027 · Cited by 119
Kim, K. T., Eckert, J., Liu, G., et al. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.09.039 · Cited by 102
Saba, F., Sajjadi, S. A., Haddad-Sabzevar, M., & Zhang, F. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.062 · Cited by 102
Guo, B., Zhang, X., Cen, X., Chen, B., Wang, X., Song, M. J., Ni, S., Yi, J., Shen, T., & Du, Y. (2018) · Carbon · doi:10.1016/j.carbon.2018.07.026 · Cited by 101
Self-citationLiu, F., Hu, N., Ning, H., Atobe, S., Yan, C., Liu, Y., Wu, L., Liu, X., Fu, S., Xu, C., et al. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.039 · Cited by 97
Self-citationKim, W. J., & Yu, Y.-P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.10.008 · Cited by 88
Niu, Z., Ma, W., Li, J., Dong, H., Ren, Y., Zhao, D., Zhou, W., & Xie, S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201532 · Cited by 47
Metadata
- Authors
- Chen, X., Tao, J., Liu, Y., Bao, R., Li, F., Li, C., & Yi, J.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 146
- Pages
- 736-755
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2916476546
- Cited by
- 170
- References
- 36
- FWCI
- 12.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.