The DOI matches its Crossref record.
Free surface electrospinning from a wire electrode
Abstract
Abstract Electrostatic jetting from a free liquid surface offers an alternative to conventional electrospinning in which jets are emitted from spinnerets. In this work we analyze a system in which a wire electrode is swept (in a rotary motion) through a bath containing a polymeric solution in contact with a high voltage, resulting in entrainment of the fluid, the formation of liquid droplets on the wire and electrostatic jetting from each liquid droplet. Solutions of polyvinylpyrrolidone in ethanol were used as test systems to evaluate each stage of the process. The volumes of individual droplets on the wire were measured by photographic methods and correlated with the viscosity, density and surface tension of the liquid, and with system parameters such as electrode rotation rate and wire diameter. The local electric field in the absence of liquid entrainment was modeled using conventional electrostatics, and jet initiation was found to occur consistently at the angular position where the electric field exceeds a critical value of 34 kV/cm, regardless of rotation rate. Two operating regimes were identified. The first is an entrainment-limited regime, in which all of the entrained liquid is jetted from the wire electrode. The second regime is field-limited, in which the residence time of the wire electrode in an electric field in excess of the critical value is too short to deplete the fluid on the wire. The productivity of the system was measured and compared to the theoretical values of liquid entrainment. As expected, highest productivity occurred at high applied potentials and high rotation rates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Developments of Advanced Electrospinning Techniques: A Critical Review
Li, Y., Zhu, J., Cheng, H., Li, G., Cho, H., Jiang, M., Gao, Q., & Zhang, X. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100410 · Cited by 578
Electrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560
Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies
Wang, C., Wang, J., Zeng, L., Qiao, Z., Liu, X., Liu, H., Zhang, J., & Ding, J. (2019) · Molecules · doi:10.3390/molecules24050834 · Cited by 331
Luo, X., Zaitoon, A., & Lim, L. (2022) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12942 · Cited by 294
An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process
AL-Jbour, N. D., Beg, M. D., Gimbun, J., & Alam, A. K. M. M. (2019) · Current Drug Delivery · doi:10.2174/1567201816666190123121425 · Cited by 92
Dolanský, J., Henke, P., Kubát, P., Fraix, A., Sortino, S., & Mosinger, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06233 · Cited by 52
Metadata
- Authors
- Forward, K. M., & Rutledge, G. C.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2012-02
- Volume
- 183
- Pages
- 492-503
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W1979268079
- Cited by
- 168
- References
- 0
- FWCI
- 6.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.