The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Calcium alginate–bentonite–activated carbon composite beads as highly effective adsorbent for methylene blue
Abstract
Abstract Three adsorbents, namely, bentonite–alginate beads, activated carbon–alginate beads, and activated carbon–bentonite–alginate beads (ABA) were prepared for the adsorption of methylene blue (MB). The effects of solution pH (3–11), temperature (30, 40, and 50 °C), initial concentration (25–500 mg/L), and contact time were investigated. Results showed that the maximum monolayer adsorption capacity of ABA beads for the adsorption of MB was 756.97 mg/g at 30 °C. Furthermore, the adsorption kinetics illustrated the suitability of employing the pseudo-second-order kinetic model. The equilibrium adsorption data fitted the Freundlich isotherm well. In addition, the ABA composite exhibited more than 70% adsorption uptake capacity after six regeneration cycles. The outcomes of this study suggest the potential of ABA composite for cationic dye removal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
Kinetics of Adsorption on Carbon from Solution
Weber, W. J., & Morris, J. C. (1963) · Journal of the Sanitary Engineering Division · doi:10.1061/jsedai.0000430 · Cited by 9,844
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Self-citationGiles, C. H., MacEwan, T. H., Nakhwa, S. N., & Smith, D. (1960) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9600003973 · Cited by 3,212
The Exchange Adsorption of Ions from Aqueous Solutions by Organic Zeolites. II. Kinetics1
Boyd, G. E., Adamson, A. W., & Myers, L. S. (1947) · Journal of the American Chemical Society · doi:10.1021/ja01203a066 · Cited by 2,667
Sing, K. S. W. (1982) · Pure and Applied Chemistry · doi:10.1351/pac198254112201 · Cited by 2,091
ZUR THEORIE DER SOGENANNTEN ADSORPTION GELÖSTER STOFFE. KUNGLIGA SVENSKA VETENSKAPSAKADEMIENS
Kolasniski, K. W. (2001) · Cited by 1,736
Metal–carboxylate interactions in metal–alginate complexes studied with FTIR spectroscopy
Papageorgiou, S. K., Kouvelos, E. P., Favvas, E. P., Sapalidis, A. A., Romanos, G. E., & Katsaros, F. K. (2010) · Carbohydrate Research · doi:10.1016/j.carres.2009.12.010 · Cited by 904
Krug, R. R., Hunter, W. G., & Grieger, R. A. (1976) · The Journal of Physical Chemistry · doi:10.1021/j100562a006 · Cited by 724
Vargas, A. M. M., Cazetta, A. L., Kunita, M. H., Silva, T. L., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.067 · Cited by 585
Adsorption Processes for Water Treatment
(1987) · Elsevier eBooks · doi:10.1016/c2013-0-04267-3 · Cited by 564
Removal of organic dyes by magnetic alginate beads
Rocher, V., Siaugue, J.-M., Cabuil, V., & Bee, A. (2008) · Water Research · doi:10.1016/j.watres.2007.09.024 · Cited by 552
Study on the adsorption of Neutral Red from aqueous solution onto halloysite nanotubes
Luo, P., Zhao, Y., Zhang, B., Liu, J., Yang, Y., & Liu, J. (2010) · Water Research · doi:10.1016/j.watres.2009.10.042 · Cited by 544
Methylene blue adsorption on graphene oxide/calcium alginate composites
Li, Y., Du, Q., Liu, T., Sun, J., Wang, Y., Wu, S., Wang, Z., Xia, Y., & Xia, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.094 · Cited by 491
Adsorption of methylene blue on adsorbent materials produced from cotton stalk
Deng, H., Lu, J., Li, G., Zhang, G., & Wang, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.06.013 · Cited by 390
Sakkas, V. A., Islam, M. A., Stalikas, C., & Albanis, T. A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.050 · Cited by 381
Self-citationZhou, C., Wu, Q., Lei, T., & Negulescu, I. I. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.034 · Cited by 372
Hassan, A. F., Abdel-Mohsen, A. M., & Fouda, M. M. G. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.104 · Cited by 346
Njoku, V. O., Foo, K. Y., Asif, M., & Hameed, B. H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.115 · Cited by 326
Self-citationRemoval of copper from aqueous solution by carbon nanotube/calcium alginate composites
Li, Y., Liu, F., Xia, B., Du, Q., Zhang, P., Wang, D., Wang, Z., & Xia, Y. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.12.114 · Cited by 324
Errais, E., Duplay, J., Darragi, F., M'Rabet, I., Aubert, A., Huber, F., & Morvan, G. (2011) · Desalination · doi:10.1016/j.desal.2011.02.031 · Cited by 290
Auta, M., & Hameed, B. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.017 · Cited by 287
Self-citationActivated carbon developed from orange peels: Batch and dynamic competitive adsorption of basic dyes
Fernandez, M. E., Nunell, G. V., Bonelli, P. R., & Cukierman, A. L. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.09.015 · Cited by 281
Sellimi, S., Younes, I., Ayed, H. B., Maalej, H., Montero, V., Rinaudo, M., Dahia, M., Mechichi, T., Hajji, M., & Nasri, M. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.10.016 · Cited by 278
Pezoti, O., Cazetta, A. L., Souza, I. P. A. F., Bedin, K. C., Martins, A. C., Silva, T. L., & Almeida, V. C. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.02.007 · Cited by 261
Giles, C. H. (1961) · Textile Research Journal · doi:10.1177/004051756103100207 · Cited by 238
Macedo, J. D. S., da Costa Júnior, N. B., Almeida, L. E., Vieira, E. F. D. S., Cestari, A. R., Gimenez, I. D. F., Villarreal Carreño, N. L., & Barreto, L. S. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.01.021 · Cited by 216
Oladipo, A. A., & Gazi, M. (2014) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2014.04.007 · Cited by 207
Salman, J. M., Njoku, V. O., & Hameed, B. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.024 · Cited by 199
Self-citationCoagulation-flocculation of azo dye Acid Orange 7 with green refined laterite soil
Lau, Y.-Y., Wong, Y.-S., Teng, T.-T., Morad, N., Rafatullah, M., & Ong, S.-A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.02.100 · Cited by 190
Wang, Y., Wang, W., & Wang, A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.090 · Cited by 178
Error Analysis of Adsorption Isotherm Models for Acid Dyes onto Bamboo Derived Activated Carbon
Chan, L. S., Cheung, W. H., Allen, S. J., & McKay, G. (2012) · Chinese Journal of Chemical Engineering · doi:10.1016/s1004-9541(11)60216-4 · Cited by 174
Sorption study of an acid dye from an aqueous solutions using modified clays
BOUBERKA, Z., KACHA, S., KAMECHE, M., ELMALEH, S., & DERRICHE, Z. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.11.026 · Cited by 168
Controlled release of the fungicide thiram from starch–alginate–clay based formulation
Singh, B., Sharma, D. K., Kumar, R., & Gupta, A. K. (2009) · Applied Clay Science · doi:10.1016/j.clay.2009.03.001 · Cited by 154
Anionic RR120 dye adsorption onto raw clay: Surface properties and adsorption mechanism
Errais, E., Duplay, J., Elhabiri, M., et al. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.03.057 · Cited by 137
Njoku, V. O., Islam, M. A., Asif, M., & Hameed, B. H. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.08.020 · Cited by 129
Self-citationAuta, M., & Hameed, B. H. (2012) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.12.012 · Cited by 124
Self-citationMahmoodi, N. M., Hayati, B., Arami, M., et al. (2011) · Desalination · doi:10.1016/j.desal.2011.02.034 · Cited by 120
Tan, W. S., & Ting, A. S. Y. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.12.056 · Cited by 106
Bosscher, D., van Caillie, M., & Deelstra, H. A. (2001) · Nutrition · doi:10.1016/s0899-9007(01)00541-x · Cited by 97
Gómez, J. M., Galán, J., Rodríguez, A., & Walker, G. (2014) · Journal of Environmental Management · doi:10.1016/j.jenvman.2014.07.041 · Cited by 86
Agulhon, P., Robitzer, M., Habas, J., et al. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.097 · Cited by 82
Removal of paraquat from water by an Algerian bentonite
Sidhoum, D. A., Socías-Viciana, M. M., Ureña-Amate, M. D., Derdour, A., González-Pradas, E., & Debbagh-Boutarbouch, N. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.07.007 · Cited by 55
Cited by
Simonin, J.-P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.079 · Cited by 2,100
Alginate-based composites for environmental applications: a critical review
Wang, B., Wan, Y., Zheng, Y., Lee, X., Liu, T., Yu, Z., Huang, J., Ok, Y. S., Chen, J., & Gao, B. (2019) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1547621 · Cited by 502
Review on recent advances of carbon based adsorbent for methylene blue removal from waste water
Santoso, E., Ediati, R., Kusumawati, Y., Bahruji, H., Sulistiono, D. O., & Prasetyoko, D. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.100233 · Cited by 500
Han, H., Rafiq, M. K., Zhou, T., Xu, R., Mašek, O., & Li, X. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.003 · Cited by 485
Lyu, H., Gao, B., He, F., Zimmerman, A. R., Ding, C., Tang, J., & Crittenden, J. C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.130 · Cited by 387
Metadata
- Authors
- Benhouria, A., Islam, M. A., Zaghouane-Boudiaf, H., Boutahala, M., & Hameed, B. H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2015-06
- Volume
- 270
- Pages
- 621-630
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2018279095
- Cited by
- 385
- References
- 44
- FWCI
- 20.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.