Lithium ion sieve synthesized via an improved solid state method and adsorption performance for West Taijinar Salt Lake brine
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract Monoclinic β-Li2TiO3 (LTO) is regarded as a lithium adsorbent precursor. In order to inhibit agglomeration during solid state reaction, C2H3LiO2·2H2O instead of Li2CO3 was firstly used as the lithium resource to synthesize LTO. Lithium ion sieve H2TiO3 (HTO) was then obtained by acid treatment of LTO. Physicochemical properties of obtained LTO and HTO were characterized via powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and particle size distribution analysis (PSD). Lithium adsorption selectivity and stability of prepared HTO for West Taijinar Salt Lake were investigated. Solid state reaction mechanism of C2H3LiO2·2H2O and TiO2 was investigated by TG-DTA analysis. Results show that melting of C2H3LiO2·2H2O (at 64.5 °C) during the early calcination stage could form liquid–solid phase and remarkably improve mixing of C2H3LiO2·2H2O and TiO2. Compared to Li2CO3 used as the lithium resource, huge heat and gases released during the reaction of dehydrated C2H3LiO2·2H2O and TiO2 (between 380 °C and 515 °C) accelerate the nucleation process and effectively inhibits agglomeration, which leads to a smaller particle size (∼70 nm). It is shown that lithium uptake and adsorption rate were improved because of easier mass transfer during the ion-exchange process. Lithium adsorption behavior could be well described by the Langmuir isotherm and pseudo-second-order kinetic model. Seperation factor α (Li/Mg) of obtained HTO in West Taijinar Salt Lake brine reached 5441.17, meaning remarkable lithium adsorption selectivity in real lake brine. Besides, adsorption uptake remained 24.5 mg/g after 5 cycles in West Taijinar Salt Lake brine, which indicates obtained HTO has good stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Global Lithium Availability: A Constraint for Electric Vehicles?
Gruber, P. W., Medina, P. A., Keoleian, G. A., Kesler, S. E., Everson, M. P., & Wallington, T. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00359.x · Cited by 620
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Synthesis and Adsorption Properties of Li1.6Mn1.6O4 Spinel
Xiao, J.-L., Sun, S.-Y., Wang, J., Li, P., & Yu, J.-G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400691d · Cited by 115
Preparation of H 2 TiO 3 -lithium adsorbent by the sol–gel process and its adsorption performance
Zhang, L., Zhou, D., Yao, Q., & Zhou, J. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.01.203 · Cited by 102
Cited by
Novel approaches for lithium extraction from salt-lake brines: A review
Liu, G., Zhao, Z., & Ghahreman, A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.05.005 · Cited by 465
Materials for lithium recovery from salt-lake brine
Xu, P., Hong, J., Qian, X., Xu, Z., Xia, H., Tao, X., Xu, Z., & Ni, Q.-Q. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05019-1 · Cited by 296
Review on the Electrochemical Extraction of Lithium from Seawater/Brine
Zhao, X., Yang, H., Wang, Y., & Sha, Z. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113389 · Cited by 199
Recent advances in lithium extraction from salt lake brine using coupled and tandem technologies
Zhang, J., Cheng, Z., Qin, X., Gao, X., Wang, M., & Xiang, X. (2023) · Desalination · doi:10.1016/j.desal.2022.116225 · Cited by 195
Nikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Zhao, Z., Liu, G., Jia, H., & He, L. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117685 · Cited by 132
Reich, R., Slunitschek, K., Danisi, R. M., Eiche, E., & Kolb, J. (2023) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047041 · Cited by 120
Zhao, H., Liang, Q., Yang, Y., Liu, W., & Liu, X. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.118513 · Cited by 67
Al-doped H 2 TiO 3 ion sieve with enhanced Li + adsorption performance
Dai, X., Zhan, H., Qian, Z., Li, J., Liu, Z., & Wu, Z. (2021) · RSC Advances · doi:10.1039/d1ra06535a · Cited by 66
Wang, P., Dai, J., Ma, Y., Chen, L., & Pan, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122495 · Cited by 59
Brine management strategies, technologies, and recovery using adsorption processes
Al-Absi, R. S., Abu-Dieyeh, M., & Al-Ghouti, M. A. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101541 · Cited by 48
Yang, J., Shang, X., Hu, B., Zhang, B., Wang, Y., Yang, J., & Liu, J. (2023) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-023-05461-6 · Cited by 28
“Therefore, lithium extraction from brines can effectively alleviate the shortage of lithium resources [6, 7].”
BackgroundDing, T., Wu, Q., Nie, Z., Zheng, M., Wang, Y., & Yang, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107647 · Cited by 20
Lithium Extraction From North Sea Oilfield Brines Using Ion Exchange Membranes
Disu, B., Rafati, R., Haddad, A. S., & Fierus, N. (2023) · SPE Offshore Europe Conference & Exhibition · doi:10.2118/215585-ms · Cited by 9
Metadata
- Authors
- Gu, D., Sun, W., Han, G., Cui, Q., & Wang, H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 350
- Pages
- 474-483
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2806364077
- Cited by
- 194
- References
- 6
- FWCI
- 7.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.