CoChat

The potential of biochar as sorptive media for removal of hazardous benzene in air

Open access
Khan, Azmatullah, Szulejko, Jan E., Samaddar, Pallabi, Kim, Ki-Hyun, Liu, Botao, Maitlo, Hubdar Ali, Yang, Xiao, Ok, Yong Sik · 2019 · Chemical Engineering Journal
Cited by 125

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

Abstract Airborne benzene is hazardous even at sub-ppm levels. Therefore, an effective strategy is required for its removal, such as the use of a sorbent with large adsorption capacity or high breakthrough volume. To meet the goal, the performance for the removal of benzene was assessed by loading benzene at 5 Pa inlet partial pressure against seven types of biowaste-derived biochar: (1) paper mill sludge, (2) conventional biochar with magnetic properties, (3) biochar composites with carbon nanotubes (CNTs), (4) gasification biochar from mixed feedstock, (5) gasification biochar from a single feedstock, (6) modified gasification biochar, and (7) activated carbon (AC) as a reference. The 298 K maximum adsorption capacities (mg g−1), when measured at a benzene inlet pressure of 5 Pa (or 50 ppm in ultrapure nitrogen) and flow rate of 50 mL atm min−1, varied widely for different biochars, from 0.35 (MS: Swine manure + plastic mulch film waste) to 144 mg g−1 (XC-1: biochar from mixed feedstock); their 10% breakthrough volumes (BTV) were in the range of 0.22–492 L g−1, respectively. The experimental data (capacity vs. benzene outlet partial pressure) could be fitted to either two or three linearized Langmuir isotherms with distinctive sorption mechanisms ((1) a retrograde region (Type III isotherm: 0 to ∼0.2 Pa), (2) an intermediate pressure region (0.2 and 2.0 Pa), and (3) a higher pressure region (>2 Pa)) which was also confirmed similarly by Freundlich, Dubinin–Radushkevich, and Elovich fitting. About 65% of the maximum capacity was achieved in the retrograde region. The strongest biochar sorbent, XC-1, showed similar performance as activated carbon to prove its feasibility toward air quality management (AQM) applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2018.10.193

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

Metadata

Authors
Khan, A., Szulejko, J. E., Samaddar, P., Kim, K.-H., Liu, B., Maitlo, H. A., Yang, X., & Ok, Y. S.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2019-04
Volume
361
Pages
1576-1585
ISSN
1385-8947 (ISSN-L)
OpenAlex
W2898538344
Cited by
125
References
6
FWCI
7.21
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.