Developing hierarchically ultra-micro/mesoporous biocarbons for highly selective carbon dioxide adsorption
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Activated carbons represent one of the important categories of the adsorbent materials for CO 2 capture currently under development. However, the low adsorption capacity and selectivity at low CO 2 partial pressure and/or relatively high flue gas temperatures is the main barrier for carbons to be applied in post-combustion CO 2 capture under practical conditions. Here, we report the successful preparation of hierarchical ultra-micro/mesoporous bio-carbons from using a facile one-step method with a low-grade biomass waste as the feedstock. The bio-carbons exhibit high adsorption capacities (1.90 mmol/g) and record-high Henry’s law CO 2 /N 2 selectivities up to 212 at ambient temperature and low CO 2 partial pressure. Unlike conventional chemical activation process for manufacturing carbon materials, the integrated compaction-carbonization-activation method proposed endows the biowaste-derived carbons with unique hierarchical bio-modal pore structures, which are highly characterised by their high mesoporosity and high ultra-microporosity with narrow pore size distributions. The results demonstrated that the unique surface textural properties along with the enhanced surface chemistry due to the simultaneously achieved potassium intercalation created favourable conditions for CO 2 adsorption with high CO 2 /N 2 selectivity at low CO 2 partial pressures, whilst the presence of mesoporosity greatly increased the CO 2 adsorption kinetics. Measurements of CO 2 adsorption heat confirmed the strong surface affinity of the prepared bio-carbons to CO 2 molecules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021 · cited 1×
“However, this technology at its various forms suffers not only from its high energy penalty but also high operational costs due to a range of operational issues, such as the corrosion, thermo-oxidative degradation and toxic emissions of the amine solvents used [5,7].”
BackgroundPost-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99 · cited 1×
“Therefore, biomass feedstocks with high nitrogen contents, such as chitosan [22], poplar anthers [23], popcorn [24] and bean dreg [25] have been investigated for preparing performance-enhanced carbon materials for CO2 adsorption, with chitosan-derived carbons containing 3.”
MethodSuperior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Cited by
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review
Kamran, U., & Park, S.-J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125776 · Cited by 262
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Biomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
Metadata
- Authors
- Liu, X., Sun, C., Liu, H., Tan, W. H., Wang, W., & Snape, C.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 361
- Pages
- 199-208
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2901505459
- Cited by
- 132
- References
- 10
- FWCI
- 6.56
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.