Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 452

The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.

Heavy metal adsorption with zeolites: The role of hierarchical pore architecture

Hong, Mei, Yu, Lingyun, Wang, Yanding, Zhang, Jian, Chen, Zhuwen, Dong, Lei, Zan, Qijie, Li, Ruili·2019·Chemical Engineering Journal

Abstract

Abstract Zeolites have been widely used for heavy metal removal due to their high cation exchange capacity and surface sorption properties. However, the empirically determined adsorption capacity trend of Pb2+ > Cu2+ > Ni2+ was not well understood. Herein, we discovered that the adsorption of Ni2+ by zeolites was greatly influenced by hierarchical pore geometry, while the adsorption of Pb2+ or Cu2+ was dependent on cation exchange determined by the framework composition. This difference in adsorption mechanisms is manifested through the systematic study of heavy metal adsorption using low-silica LTA and FAU zeolites with different mesopore architectures and compositions. Synthesizing mesoporous zeolite A of MLTA-P using proline mesoporogen considerably enhanced the Ni2+ adsorption capacity to more than twice of that of conventional zeolite A synthesized without organics, while the adsorption capacities for Cu2+ and Pb2+ were almost unaltered at ∼170 and 510 mg/g. The study on the effect of zeolite synthesis time and adsorbate pH value revealed the significant influence of zeolite crystallinity, surface hydroxyl group, and hierarchical pore architecture on the Ni2+ uptake. The MLTA-P zeolite showed higher stability against pH variation in acid range and remarkably enhanced uptake in alkaline conditions, reaching 218 mg/g at a pH of 11. The full characterization of the adsorbent by scanning electron microscopy and X-ray photoelectron spectroscopy indicated the involvement of the surface reaction forming Ni phyllosilicate nanosheet species during the nickel metal removal process in which transport limitation played a crucial role. The uptake kinetics and isotherms could be perfectly reflected by a pseudo-second-order rate equation and the Langmuir model, confirming the nature of chemisorption.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2018.11.087

Cites

52 of 52 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 52 references

Research works printed but not linked: 8

  1. Liu, 2018, Nanopore-based strategy for sequential separation of heavy-metal ions in water, Environ. Sci. Technol., 52, 5884, 10.1021/acs.est.7b06706 · doi:10.1021/acs.est.7b06706
  2. Weber, 1987, Simulation and design models for adsorption processes, Environ. Sci. Technol., 21, 1040, 10.1021/es00164a002 · doi:10.1021/es00164a002
  3. Zhang, 2012, Removal of heavy metal ions from aqueous solution using Fe3O4–SiO2-poly(1,2-diaminobenzene) core–shell sub-micron particles, J. Colloid Interf. Sci., 387, 205, 10.1016/j.jcis.2012.07.066 · doi:10.1016/j.jcis.2012.07.066
  4. Ning, 2017, Study of quench effect on heavy metal uptake efficiency by an aluminosilicate-based material, Chem. Eng. J., 311, 37, 10.1016/j.cej.2016.11.078 · doi:10.1016/j.cej.2016.11.078
  5. Li, 2014, Yolk–satellite–shell structured Ni–Yolk@Ni@SiO2 Nanocomposite: superb catalyst toward methane CO2 reforming reaction, ACS Catal., 4, 1526, 10.1021/cs401027p · doi:10.1021/cs401027p
  6. Li, 2017, Synthesis of MnNi–SAPO-34 by a one-pot hydrothermal method and its excellent performance for the selective catalytic reduction of NO by NH3, Catal. Sci. Technol., 4984, 10.1039/C7CY01507K · doi:10.1039/c7cy01507k
  7. Rodriguez-Gomez, 2017, Identification of outer and inner nickel particles in a mesoporous support: how the channels modify the reducibility of Ni/SBA-15 catalysts, Chemnanomat, 3, 94, 10.1002/cnma.201600297 · doi:10.1002/cnma.201600297
  8. Mishael, 2007, Effect of pore size on adsorption of a polyelectrolyte to porous glass, Langmuir, 23, 2510, 10.1021/la062314r · doi:10.1021/la062314r

Cited by

See all 452

Metadata

Authors
Hong, M., Yu, L., Wang, Y., Zhang, J., Chen, Z., Dong, L., Zan, Q., & Li, R.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2019-03
Volume
359
Pages
363-372
ISSN
1385-8947 (ISSN-L)
OpenAlex
W2901271709
Cited by
452
References
52
FWCI
16.97
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
National Natural Science Foundation of China (21671010)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Heavy metal adsorption with zeolites: The role of hierarchical pore architecture. https://app.cochat.ai/papers/10.1016/j.cej.2018.11.087
The paper
Hong, M., Yu, L., Wang, Y., Zhang, J., Chen, Z., Dong, L., Zan, Q., & Li, R. (2019). Heavy metal adsorption with zeolites: The role of hierarchical pore architecture. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.11.087

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.