Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 56 of the 58 references it cites were found in a registry or an index; none of the 4 sources its claims cite is checked for support yet.

Adsorption capability of brewed tea waste in waters containing toxic lead(II), cadmium (II), nickel (II), and zinc(II) heavy metal ions

Open access
Çelebi, Hakan, Gök, Gülden, Gök, Oğuzhan · 2020 · Scientific Reports

Abstract

Recently, the search for low-cost eco-friendly adsorbents has become one of the main objectives of researchers. The aim of this study was to test the removal of four heavy metals, namely lead (Pb), zinc (Zn), nickel (Ni) and cadmium (Cd), from a simulated watery solution using brewed tea waste as a potentially suitable adsorbent. The effects of pH levels (2.0–6.0), adsorbent amount (0.1–5.0 g), contact times (1–150 min.) were examined throughout the adsorption process. The results of the experiments showed that the heavy metals elimination yields had an inverse relationship with pH and a linear relationship between the other parameters. The optimum pH for the removal of the heavy metals was between 4.0 and 5.0 in the case of the brewed tea waste. Equilibrium times of 2, 10, 30 and 5 min were required for the adsorption of Pb, Zn, Ni, Cd onto Camellia sinensis , respectively. Based on the results of this study it can be said that brewed tea waste has a high potential to remove heavy metals from aqueous solutions. The maximum adsorption capacities were calculated as 1.197, 1.457, 1.163 and 2.468 mg/g, for Pb, Zn, Ni and Cd, respectively, by fitting the equilibrium data to the Langmuir isotherm model.

Overview

CoChat Summary

TL;DR

Brewed tea waste (BTW) was tested as a low-cost adsorbent for Pb, Cd, Ni, and Zn in synthetic aqueous solutions, with removal strongly dependent on pH, adsorbent dose, and contact time. The data fit the Langmuir isotherm and pseudo-second-order kinetics, with maximum Langmuir capacities of 1.197 mg/g Pb, 1.457 mg/g Ni, 1.163 mg/g Cd, and 2.468 mg/g Zn.

Key findings

  • Optimum pH was 4 for Pb and Cd and 5 for Ni and Zn; equilibrium times were 2 min for Pb, 10 min for Zn, 30 min for Ni, and 5 min for Cd.
  • At the tested conditions, removal percentages were Pb 97.97%, Cd 84.74%, Ni 82%, and Zn 76% (Table 5).
  • Langmuir maximum adsorption capacities were Pb 1.197 mg/g, Ni 1.457 mg/g, Cd 1.163 mg/g, and Zn 2.468 mg/g; the Langmuir model fit best, with HYBRID error function giving the best result.
  • Pseudo-second-order kinetics best described adsorption (R² = 0.99), suggesting chemisorption; BTW had a negative zeta potential (−20.58 mV) and pHZPC of 2.45.

Methods

  • BTW was collected from food units at Aksaray University, washed, boiled, dried, pulverized, and sieved; it was characterized by FTIR, SEM/EDS, BET surface area, elemental analysis, proximate analysis, and zeta potential.
  • Batch experiments used 100 mg BTW in 250 mL flasks with 100 mL individual metal solutions, initial concentrations around 100 mg/L, pH 2.0–6.0, shaken at 150 rpm for 24 h at 20 °C, and analyzed by ICP-OES.
  • Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms and PFO, PSO, Elovich, and intraparticle diffusion kinetics were fitted; one-way ANOVA with Duncan test was applied at p < 0.01.

Limitations

  • The paper states BTW’s surface structure was not sufficiently developed and adsorption may be limited to the outer surface; it also notes temperature-change data were not shown.
  • Evident from the text: experiments used synthetic single-metal solutions at ~100 mg/L, not real multi-metal industrial or natural waters, and the pH range was restricted to 2–6.
  • Evident from the text: reported removal/capacity orderings are inconsistent in places (e.g., abstract vs. Table 4/Table 5), and no regeneration, reuse, or cost analysis is reported.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41598-020-74553-4

Cites

56 of 56 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 SEM and EDX (a) before and (b) after adsorption heavy metals by BTW.
Figure 1 SEM and EDX (a) before and (b) after adsorption heavy metals by BTW.CC BY · PubMed Central
Figure 2 FTIR spectra before (red line), after (blue line) adsorption heavy metals by BTW.
Figure 2 FTIR spectra before (red line), after (blue line) adsorption heavy metals by BTW.CC BY · PubMed Central
Figure 3 Impact of pH (a), BTW concentration (b), contact time (c) on the elimination of Pb, Cd, Ni, Zn ions.
Figure 3 Impact of pH (a), BTW concentration (b), contact time (c) on the elimination of Pb, Cd, Ni, Zn ions.CC BY · PubMed Central
Figure 4 Langmuir isotherm curves of Pb, Cd, Ni and Zn adsorption by BTW.
Figure 4 Langmuir isotherm curves of Pb, Cd, Ni and Zn adsorption by BTW.CC BY · PubMed Central
Figure 5 The plot between experimentally observed and calculated values of Langmuir.
Figure 5 The plot between experimentally observed and calculated values of Langmuir.CC BY · PubMed Central
Figure 6 PSO kinetic curves of Pb, Cd, Ni and Zn adsorption by BTW.
Figure 6 PSO kinetic curves of Pb, Cd, Ni and Zn adsorption by BTW.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 2 Not valid · 4 Not checked · 42 Own results and interpretations

24 more claims

Create a free account to see all 48 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 16
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 5

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

5 of 9 · the rest aren’t loaded

4 more findings

Create a free account to see every finding of this check.

See all findings — free account

Citations

Cites

Show all 58 references

Research works printed but not linked: 2

  1. Takeno, N. Atlas of Eh-pH diagrams (Intercomparison of thermodynamic databases). Geol. Surv. Jpn. 419, 1–287 (2005).
  2. Draman, S. F. S. et al. Adsorption of lead (II) ions in aqueous solution using selected agro-waste. ARPN J. Eng. Appl. Sci. 10, 297–300 (2015).

Cited by

See all 245

Metadata

Authors
Çelebi, H., Gök, G., & Gök, O.
Affiliations
Aksaray University (TR)
Corresponding author
Çelebi, Hakan
Venue
Scientific Reports
Published
2020-10-16
Volume
10
Issue
1
Pages
17570-17570
ISSN
2045-2322 (ISSN-L)
OpenAlex
W3093235599
Cited by
245
References
58
Citations by year
2026: 28 · 2025: 35 · 2024: 47 · 2023: 45 · 2022: 56 · 2021: 34
FWCI
10.35
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
Aksaray Üniversitesi
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Water Science and Technology › Heavy Metal Pollution Remediation
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
Keywords
heavy metal adsorption, lead removal, cadmium removal, nickel removal, zinc removal, Camellia sinensis, low-cost biosorbent, pH effect on adsorption, Langmuir isotherm, adsorption capacity, water treatment

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Adsorption capability of brewed tea waste in waters containing toxic lead(II), cadmium (II), nickel (II), and zinc(II) heavy metal ions. https://app.cochat.ai/papers/10.1038/s41598-020-74553-4
The paper
Çelebi, H., Gök, G., & Gök, O. (2020). Adsorption capability of brewed tea waste in waters containing toxic lead(II), cadmium (II), nickel (II), and zinc(II) heavy metal ions. Scientific Reports. https://doi.org/10.1038/s41598-020-74553-4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.