The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Nitrogen enriched porous carbons from d-glucose with excellent CO2 capture performance
Open accessAbstract
Abstract In this study, nitrogen-enriched porous carbonaceous sorbents were successfully prepared by co-hydrothermal treatment of d -glucose and urea, followed by KOH activation under different conditions. Using this new synthesis strategy, the as-prepared adsorbents show a high nitrogen content ranging from 6.20 to 12.17 wt%. In addition, these sorbents also have highly developed porous texture including high narrow microporosity. The optimal sample exhibits the high CO2 uptake of 4.26 and 6.70 mmol/g at 25 and 0 °C, respectively, at 1 bar. Additional study finds that both narrow micropores and nitrogen content are important in deciding the CO2 adsorption ability for these adsorbents under ambient conditions. Besides the high CO2 adsorption ability, these adsorbents also demonstrate stable recyclability, high selectivity of CO2 over N2, suitable heat of adsorption, rapid adsorption kinetics, as well as excellent dynamic CO2 uptake. The above-mentioned excellent CO2 adsorption performance together with the low cost of precursor and facile synthesis strategy prove that these glucose-based porous carbonaceous sorbents are a potential candidate for industrial capture of CO2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Self-citationImportance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Self-citationWang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
Self-citationCO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Cited by
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review
Kamran, U., & Park, S.-J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125776 · Cited by 262
Pudi, A., Rezaei, M., Signorini, V., Andersson, M. P., Baschetti, M. G., & Mansouri, S. S. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121448 · Cited by 258
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Metadata
- Authors
- Rao, L., Ma, R., Liu, S., Wang, L., Wu, Z., Yang, J., & Hu, X.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 362
- Pages
- 794-801
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2910754795
- Cited by
- 193
- References
- 8
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nitrogen enriched porous carbons from d-glucose with excellent CO2 capture performance. https://app.cochat.ai/papers/10.1016/j.cej.2019.01.093
- The paper
- Rao, L., Ma, R., Liu, S., Wang, L., Wu, Z., Yang, J., & Hu, X. (2019). Nitrogen enriched porous carbons from d-glucose with excellent CO2 capture performance. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.01.093
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.