The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Degradation of tetracycline by peroxymonosulfate activated with zero-valent iron: Performance, intermediates, toxicity and mechanism
Abstract
In this paper, the degradation of tetracycline (TC) by peroxymonosulfate (PMS) activated with zero-valent iron (Fe0) was systematically studied through batches of experiments. First, effects of the key parameters (i.e., Fe0 dosage, PMS dosage, initial pH and co-existing ions) on TC degradation were investigated. Under the optimal conditions, high TC removal efficiency (88.5%) was achieved after 5 min treatment. Also, four control experiments were conducted to demonstrate the excellent performance of Fe0/PMS process and the synergistic effect between Fe0 and PMS. Compared with Fe2+ (the relatively common PMS activator), Fe0 was an efficient and long-lasting activator which consume less PMS and produce less dissolved iron ions. Then, the characteristics of reacted Fe0 particles were analyzed by SEM-EDS, XRD and XPS. The results shows that a few iron corrosion products generated and some of them deposited on the surface of reacted Fe0 particles. The generated iron corrosion products could promote PMS activation or adsorb TC directly. Next, the possible degradation pathway of TC was elaborated according to the intermediates detected by LC-QTOF-MS/MS and the toxicity in solution during reaction was evaluated. Finally, the common free radicals were monitored and the reaction mechanism was proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.059 · Cited by 4,087
Rate Constants for Reactions of Inorganic Radicals in Aqueous Solution
Neta, P., Huie, R. E., & Ross, A. B. (1988) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555808 · Cited by 3,651
Ghanbari, F., & Moradi, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.064 · Cited by 2,680
X-ray photoelectron spectroscopic studies of iron oxides
McIntyre, N. S., & Zetaruk, D. G. (1977) · Analytical Chemistry · doi:10.1021/ac50019a016 · Cited by 1,815
Influence of pH on the Formation of Sulfate and Hydroxyl Radicals in the UV/Peroxymonosulfate System
Guan, Y.-H., Ma, J., Li, X.-C., Fang, J.-Y., & Chen, L.-W. (2011) · Environmental Science & Technology · doi:10.1021/es2017363 · Cited by 1,338
Identification of Sulfate and Hydroxyl Radicals in Thermally Activated Persulfate
Liang, C., & Su, H.-W. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9002848 · Cited by 1,301
Activation of peroxymonosulfate by base: Implications for the degradation of organic pollutants
Qi, C., Liu, X., Ma, J., Lin, C., Li, X., & Zhang, H. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.02.089 · Cited by 1,125
Rastogi, A., Al-Abed, S. R., & Dionysiou, D. D. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.07.010 · Cited by 1,112
Ji, L., Chen, W., Duan, L., & Zhu, D. (2009) · Environmental Science & Technology · doi:10.1021/es803268b · Cited by 801
Xu, Y., Ai, J., & Zhang, H. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.01.023 · Cited by 683
Cited by
Xiao, S., Cheng, M., Zhong, H., Liu, Z., Liu, Y., Yang, X., & Liang, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123265 · Cited by 954
Xin, S., Liu, G., Ma, X., Gong, J., Ma, B., Yan, Q., Chen, Q., Ma, D., Zhang, G., Gao, M., et al. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119386 · Cited by 567
Peng, X., Wu, J., Zhao, Z., Wang, X., Dai, H., Xu, L., Xu, G., Jian, Y., & Hu, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130803 · Cited by 400
Insight on water remediation application using magnetic nanomaterials and biosorbents
Abdel Maksoud, M. I. A., Elgarahy, A. M., Farrell, C., Al-Muhtaseb, A. H., Rooney, D. W., & Osman, A. I. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213096 · Cited by 374
Li, X., Cui, K., Guo, Z., Yang, T., Cao, Y., Xiang, Y., Chen, H., & Xi, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122324 · Cited by 308
Hassani, A., Scaria, J., Ghanbari, F., & Nidheesh, P. V. (2023) · Environmental Research · doi:10.1016/j.envres.2022.114789 · Cited by 293
In-situ immobilization of ZIF-67 on wood aerogel for effective removal of tetracycline from water
Chen, G., He, S., Shi, G., Ma, Y., Ruan, C., Jin, X., Chen, Q., Liu, X., Dai, H., Chen, X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130184 · Cited by 289
Self-citationHou, J., He, X., Zhang, S., Yu, J., Feng, M., & Li, X. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145311 · Cited by 260
Wang, W., Chen, M., Wang, D., Yan, M., & Liu, Z. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145522 · Cited by 253
Sun, Y., Xie, H., Zhou, C., Wu, Y., Pu, M., & Niu, J. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122827 · Cited by 108
Wang, W., Deng, P., Liu, X., Ma, Y., & Yan, Y. (2021) · Microchemical Journal · doi:10.1016/j.microc.2020.105876 · Cited by 34
Metadata
- Authors
- Cao, J., Lai, L., Lai, B., Yao, G., Chen, X., & Song, L.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 364
- Pages
- 45-56
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2913204964
- Cited by
- 647
- References
- 75
- FWCI
- 28.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.