CoChat

Combined synthesis of Li4SiO4 sorbent with high CO2 uptake in the indirect carbonation of blast furnace slag process

Open access
Liu, Weizao, Song, Lei, Xu, Chunbao (Charles), Rohani, Sohrab, Chen, Meng, Liang, Bin, Li, Chun · 2019 · Chemical Engineering Journal
Cited by 56

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Abstract Carbon capture, utilization and storage (CCUS) is one of the most important technological options to mitigate the effect of greenhouse gases on the global climate. A process for indirect mineral carbonation of blast furnace slag (BFS) with (NH4)2SO4 as a recyclable reagent has been proposed recently. Preparation of high-performance and high-value-added products from its by-products would further improve economy of the process. In this study, Li4SiO4, a lithium-based high temperature CO2 sorbent, was prepared using Li2CO3 or LiOH·H2O and the silica gel derived from the indirect carbonation process. As a comparison, two other silicon sources were also used in the synthesis. The sorbents thus-prepared were compared for their CO2 uptake performances. The results show that the sorbent synthesized with Li2CO3 and the BFS-derived silica gel at Li/Si molar ratio of 4 (Li2CO3-BFS-4) possesses the best CO2 uptake performance with a sorption capacity of 0.329 (g CO2/g sorbent) within 20 min. The replacement of Li+ in the Li4SiO4 crystal lattice by the impurity metal ions, Ti4+ and Al3+, entrained in the silica gel through co-precipitation during the mineralization process, enhanced the diffusion of Li+ and O2−, which might be responsible for the excellent CO2 uptake performance. The effect of absorption temperature, Li/Si ratio, CO2 concentration and the CO2 sorption/desorption cycling stability were also investigated systematically. Compared with other existing synthesis methods, the method presented in this work for high temperature CO2 sorbent of Li4SiO4 through mineral carbonation of blast furnace slag is more environment-friendly and economically attractive, thus with promise in industrial application.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2019.03.186

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 56

Metadata

Authors
Liu, W., Song, L., Xu, C. (., Rohani, S., Chen, M., Liang, B., & Li, C.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2019-08
Volume
370
Pages
71-80
ISSN
1385-8947 (ISSN-L)
OpenAlex
W2923449433
Cited by
56
References
7
FWCI
3.77
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.