The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Flexible, superhydrophobic, and electrically conductive polymer nanofiber composite for multifunctional sensing applications
Abstract
Abstract Sensor materials that can detect chemical vapors or mechanical deformation have wide applications in the field of healthcare, flexible electronics, environmental protection, etc. However, it is still challenging to prepare stretchable and multifunctional sensors that can be served as both chemical vapor and strain sensors. Here, a superhydrophobic and stretchable nanofiber composite is prepared by acid modified carbon nanotubes (ACNTs) decoration onto the polyurethane (PU)/ polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene (SEBS) nanofibers, followed by the hydrolysis of methyltrichlorosilane (MTS) on the ACNT surface. The introduction of ACNTs and hydrolysate of MTS, namely the polysiloxane, significantly improves the mechanical properties of the blend nanofibrous membrane including the Young’s modulus, tensile strength and elongation at break. The superhydrophobicity can be maintained even under corrosive conditions. When served as the chemical vapor sensor, the nanofiber composite displays good selectivity, high sensitivity and low detection limit (1 ppm for the toluene vapor). Also, the nanofiber composite can be used as wearable strain sensors that can detect various body motions. The multifunctional nanofiber composite has potential applications in wearable electronic, electrical nose for gas leakage and smart textile.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Skin-inspired highly stretchable and conformable matrix networks for multifunctional sensing
Hua, Q., Sun, J., Liu, H., Bao, R., Yu, R., Zhai, J., Pan, C., & Wang, Z. L. (2018) · Nature Communications · doi:10.1038/s41467-017-02685-9 · Cited by 1,413
Zheng, Y., Li, Y., Dai, K., Wang, Y., Zheng, G., Liu, C., & Shen, C. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.019 · Cited by 369
Cited by
Luo, J., Gao, S., Luo, H., Wang, L., Huang, X., Guo, Z., Lai, X., Lin, L., Li, R. K. Y., & Gao, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126898 · Cited by 483
Self-citationZhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
Electrospun nanofiber-based soft electronics
Wang, Y., Yokota, T., & Someya, T. (2021) · NPG Asia Materials · doi:10.1038/s41427-020-00267-8 · Cited by 267
Multifunctional superhydrophobic surfaces
Goharshenas Moghadam, S., Parsimehr, H., & Ehsani, A. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102397 · Cited by 259
Metadata
- Authors
- Gao, J., Wang, L., Guo, Z., Li, B., Wang, H., Luo, J., Huang, X., & Xue, H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 381
- Pages
- 122778
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2972772073
- Cited by
- 200
- References
- 3
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.