The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Uniform and stable immobilization of metal-organic frameworks into chitosan matrix for enhanced tetracycline removal from water
Abstract
Abstract Metal-organic frameworks (MOFs) have been attractive adsorbents for the treatment of antibiotic wastewater. However, in their powder form, the adsorbents suffer from the disadvantage of poor recyclability and complex operational process. Herein, we incorporated typical MOFs (ZIF-8, ZIF-67, HKUST-1, and Fe-BTC) into low-cost chitosan matrix for the tetracycline removal. Metal hydroxide(or metal oxide)/chitosan composite beads from the metal salt/chitosan solution were used as MOF precursor, which lead to the uniform and stable MOF loading into chitosan. This composition could not only shape MOFs into beads but also improve the adsorption capacity of the chitosan. As a result, ZIF-8-chitosan composite beads exhibited good adsorption performance toward antibiotic tetracycline. The adsorption processes followed pseudo-second-order model and Langmuir isotherm model. The maximum adsorption capacity could reach 495.04 mg/g, which is higher than most of the MOF-based or natural polymer-based tetracycline adsorbents. Moreover, the removal efficiency of ZIF-8-chitosan composite beads toward tetracycline was still above 90% after ten adsorption-desorption cycles. In the fixed-bed experiment, ZIF-8-chitosan column could treat ~887 bed volumes (BV) of tetracycline solution in real water sample. Both experimental characterizations and DFT calculations indicated that the adsorption mechanism involves in the electrostatic interaction, π-π stacking interaction and hydrogen-bonding interaction. This study provides a promising strategy for uniform MOF loading into the matrix and potential adsorbents for pharmaceutical wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lee, C., Yang, W., & Parr, R. G. (1988) · Physical Review B · doi:10.1103/physrevb.37.785 · Cited by 100,874
Density-functional exchange-energy approximation with correct asymptotic behavior
Becke, A. D. (1988) · Physical Review A · doi:10.1103/physreva.38.3098 · Cited by 53,711
Trott, O., & Olson, A. J. (2010) · Journal of Computational Chemistry · doi:10.1002/jcc.21334 · Cited by 38,412
Hay, P. J., & Wadt, W. R. (1985) · The Journal of Chemical Physics · doi:10.1063/1.448799 · Cited by 13,824
Synthesis and catalytic properties of MIL-100(Fe), an iron(iii) carboxylate with large pores
Horcajada, P., Surblé, S., Serre, C., Hong, D.-Y., Seo, Y.-K., Chang, J.-S., Grenèche, J.-M., Margiolaki, I., & Férey, G. (2007) · Chem. Commun. · doi:10.1039/b704325b · Cited by 1,538
Metal–organic frameworks based membranes for liquid separation
Li, X., Liu, Y., Wang, J., Gascon, J., Li, J., & Van der Bruggen, B. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00575j · Cited by 747
Li, N., Zhou, L., Jin, X., Owens, G., & Chen, Z. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.12.047 · Cited by 620
Review on recent progress in chitosan-based hydrogels for wastewater treatment application
Mohammadzadeh Pakdel, P., & Peighambardoust, S. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.070 · Cited by 578
Waste biomass adsorbents for copper removal from industrial wastewater—A review
Bilal, M., Shah, J. A., Ashfaq, T., Gardazi, S. M. H., Tahir, A. A., Pervez, A., Haroon, H., & Mahmood, Q. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.07.071 · Cited by 567
Cao, J., Yang, Z.-H., Xiong, W.-P., Zhou, Y.-Y., Peng, Y.-R., Li, X., Zhou, C.-Y., Xu, R., & Zhang, Y.-R. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.060 · Cited by 505
Selective separation of methyl orange from water using magnetic ZIF-67 composites
Yang, Q., Ren, S., Zhao, Q., Lu, R., Hang, C., Chen, Z., & Zheng, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.099 · Cited by 462
Zhu, L., Zong, L., Wu, X., Li, M., Wang, H., You, J., & Li, C. (2018) · ACS Nano · doi:10.1021/acsnano.8b00566 · Cited by 455
Metal–Organic Framework Films and Their Potential Applications in Environmental Pollution Control
Ma, X., Chai, Y., Li, P., & Wang, B. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00113 · Cited by 438
Simultaneous removal of mixed contaminants, copper and norfloxacin, from aqueous solution by ZIF-8
Zhou, L., Li, N., Owens, G., & Chen, Z. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.068 · Cited by 411
Liu, Q., Zhong, L.-B., Zhao, Q.-B., Frear, C., & Zheng, Y.-M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04598 · Cited by 316
Azhar, M. R., Abid, H. R., Sun, H., Periasamy, V., Tadé, M. O., & Wang, S. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.06.032 · Cited by 288
Hou, J., Chen, Z., Gao, J., Xie, Y., Li, L., Qin, S., Wang, Q., Mao, D., & Luo, Y. (2019) · Water Research · doi:10.1016/j.watres.2019.05.034 · Cited by 276
Wu, C.-S., Xiong, Z.-H., Li, C., & Zhang, J.-M. (2015) · RSC Advances · doi:10.1039/c5ra15497a · Cited by 272
Jin, J., Yang, Z., Xiong, W., Zhou, Y., Xu, R., Zhang, Y., Cao, J., Li, X., & Zhou, C. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.08.434 · Cited by 266
Huang, Q., Liu, M., Mao, L., Xu, D., Zeng, G., Huang, H., Jiang, R., Deng, F., Zhang, X., & Wei, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.03.102 · Cited by 254
Activation CuFe2O4 by Hydroxylamine for Oxidation of Antibiotic Sulfamethoxazole
Yan, J., Peng, J., Lai, L., Ji, F., Zhang, Y., Lai, B., Chen, Q., Yao, G., Chen, X., & Song, L. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b03340 · Cited by 251
Zhao, R., Li, X., Sun, B., Zhang, Y., Zhang, D., Tang, Z., Chen, X., & Wang, C. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.04.029 · Cited by 250
Self-citationZhao, R., Li, X., Sun, B., Li, Y., Li, Y., Yang, R., & Wang, C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09784g · Cited by 243
Self-citationLi, X., Wang, B., Cao, Y., Zhao, S., Wang, H., Feng, X., Zhou, J., & Ma, X. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05751 · Cited by 237
Self-citationSeo, P. W., Khan, N. A., & Jhung, S. H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.021 · Cited by 236
Study on adsorption of tetracycline by Cu-immobilized alginate adsorbent from water environment
Zhang, X., Lin, X., He, Y., Chen, Y., Luo, X., & Shang, R. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.218 · Cited by 232
Zhu, Z., Wu, P., Liu, G., He, X., Qi, B., Zeng, G., Wang, W., Sun, Y., & Cui, F. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.145 · Cited by 198
Facile fabrication of hierarchical porous ZIF-8 for enhanced adsorption of antibiotics
Chen, X., Jiang, X., Yin, C., Zhang, B., & Zhang, Q. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.12.080 · Cited by 188
Abdi, J., Mahmoodi, N. M., Vossoughi, M., & Alemzadeh, I. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.06.040 · Cited by 187
Zhu, H., Zhang, Q., & Zhu, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04505 · Cited by 185
Cheng, X. Q., Wang, Z. X., Zhang, Y., Zhang, Y., Ma, J., & Shao, L. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.03.005 · Cited by 176
Fard, S. G., Haghighi, M., & Shabani, M. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.02.021 · Cited by 138
Effective adsorption of Congo red by a MOF-based magnetic material
Han, L., Ge, F.-Y., Sun, G.-H., Gao, X., & Zheng, H. (2019) · Dalton Transactions · doi:10.1039/c9dt00813f · Cited by 129
One-step fabrication of chitosan-Fe(OH)3 beads for efficient adsorption of anionic dyes
XinxinYang, Li, Y., Gao, H., Wang, C., Zhang, X., & Zhou, H. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.05.137 · Cited by 120
Cao, J., Lei, C., Yang, J., Cheng, X., Li, Z., Yang, B., Zhang, X., Lei, L., Hou, Y., & Ostrikov, K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08337a · Cited by 114
Degradation of oxytetracycline (OTC) and nitrogen conversion characteristics using a novel strain
Shao, S., Hu, Y., Cheng, J., & Chen, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.032 · Cited by 103
Zhou, S., Strømme, M., & Xu, C. (2019) · Chemistry - A European Journal · doi:10.1002/chem.201806417 · Cited by 102
Enhanced Osseointegration of Porous Titanium Modified with Zeolitic Imidazolate Framework-8
Zhang, X., Chen, J., Pei, X., Wang, J., Wan, Q., Jiang, S., Huang, C., & Pei, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07800 · Cited by 96
Liu, J., Li, J., Wang, G. Q., Yang, W., Yang, J. W., & Liu, Y. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.07.059 · Cited by 92
Maan, O., Song, P., Chen, N., & Lu, Q. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801895 · Cited by 82
Lu, T., Zhu, Y., Qi, Y., et al. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.092 · Cited by 71
Highly Robust MOF Polymeric Beads with a Controllable Size for Molecular Separations
Cousin-Saint-Remi, J., der Perre, S. V., Segato, T., Delplancke, M., Goderis, S., Terryn, H. A., Baron, G. V., & Denayer, J. F. M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00521 · Cited by 67
Graphene‐Sensitized Perovskite Oxide Monolayer Nanosheets for Efficient Photocatalytic Reaction
Li, D., Zhao, H., Li, L., Mao, B., Chen, M., Shen, H., Shi, W., Jiang, D., & Lei, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806284 · Cited by 59
Induced-fit adsorption of diol-based porous organic polymers for tetracycline removal
Zhang, S., Li, Y., Shi, C., Guo, F., He, C., Cao, Z., Hu, J., Cui, C., & Liu, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.09.003 · Cited by 40
Enhancement of arsenite removal using manganese oxide coupled with iron (III) trimesic
Phanthasri, J., Khamdahsag, P., Jutaporn, P., et al. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.09.032 · Cited by 34
Cited by
Du, C., Zhang, Z., Yu, G., Wu, H., Chen, H., Zhou, L., Zhang, Y., Su, Y., Tan, S., Yang, L., et al. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2020.129501 · Cited by 543
Karimi-Maleh, H., Ayati, A., Davoodi, R., Tanhaei, B., Karimi, F., Malekmohammadi, S., Orooji, Y., Fu, L., & Sillanpää, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125880 · Cited by 526
da Silva Alves, D. C., Healy, B., Pinto, L. A. D. A., Cadaval, T. R. S., & Breslin, C. B. (2021) · Molecules · doi:10.3390/molecules26030594 · Cited by 381
Deng, Y., Lu, T., Cui, J., Keshari Samal, S., Xiong, R., & Huang, C. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119623 · Cited by 320
High-performance Fe-doped ZIF-8 adsorbent for capturing tetracycline from aqueous solution
Yang, H., Hu, S., Zhao, H., Luo, X., Liu, Y., Deng, C., Yu, Y., Hu, T., Shan, S., Zhi, Y., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126046 · Cited by 262
Metadata
- Authors
- Zhao, R., Ma, T., Zhao, S., Rong, H., Tian, Y., & Zhu, G.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 382
- Pages
- 122893
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2973792844
- Cited by
- 463
- References
- 45
- FWCI
- 14.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.