The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Taming wettability of lithium ion sieve via different TiO2 precursors for effective Li recovery from aqueous lithium resources
Abstract
The titanium type lithium ion sieves (LISs) are considered as a promising adsorbent for lithium extraction from liquid resources. However, different TiO2 precursors prepared LISs present greatly difference in adsorption performance and recycle stability. In this study, the influence of the different crystal phases of TiO2 precursors (amorphous, anatase, and rutile) on the adsorption performance of the terminated H2TiO3-lithium ion sieve (HTO) were investigated. On the basis of contact angle experiments, we find the correlation between the hydrophilic and the adsorption performance of HTO. Among the three types of HTO adsorbents, anatase TiO2-derived HTO (HTO-400) exhibited the highest adsorption performance for Li+ due to its the strongest hydrophilicity and was favorable for contacting with Li+ in solution. Lithium adsorption studies showed that the equilibrium adsorption capacity of HTO-400 reached 34.2 mg/g within 24 h. Competitive adsorption and recycling results indicated that HTO-400 possessed a highly selectivity for Li+ and was easy to regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Global lithium resources: relative importance of pegmatite, brine and other deposits
Kesler, S. E., Gruber, P. W., Medina, P. A., Keoleian, G. A., Everson, M. P., & Wallington, T. J. (2012) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2012.05.006 · Cited by 1,140
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Lithium availability and future production outlooks
Vikström, H., Davidsson, S., & Höök, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.005 · Cited by 926
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Paranthaman, M. P., Li, L., Luo, J., Hoke, T., Ucar, H., Moyer, B. A., & Harrison, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03464 · Cited by 293
Self-citation
Cited by
Environmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Recent advances in lithium extraction from salt lake brine using coupled and tandem technologies
Zhang, J., Cheng, Z., Qin, X., Gao, X., Wang, M., & Xiang, X. (2023) · Desalination · doi:10.1016/j.desal.2022.116225 · Cited by 195
On the Structure and Lithium Adsorption Mechanism of Layered H 2 TiO 3
Marthi, R., Asgar, H., Gadikota, G., & Smith, Y. R. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20691 · Cited by 170
Reich, R., Slunitschek, K., Danisi, R. M., Eiche, E., & Kolb, J. (2023) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047041 · Cited by 120
Luo, G., Li, X., Chen, L., Zhang, Y., Gu, J., Chao, Y., Zhu, W., Liu, Z., & Xu, C. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140928 · Cited by 86
Self-citationRecovery of lithium from high Mg/Li ratio salt-lake brines using ion-exchange with NaNTf2 and TBP
Bai, R., Wang, J., Wang, D., Cui, J., & Zhang, Y. (2022) · Hydrometallurgy · doi:10.1016/j.hydromet.2022.105914 · Cited by 41
Ding, T., Wu, Q., Nie, Z., Zheng, M., Wang, Y., & Yang, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107647 · Cited by 20
Metadata
- Authors
- Li, X., Chao, Y., Chen, L., Chen, W., Luo, J., Wang, C., Wu, P., Li, H., & Zhu, W.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 392
- Pages
- 123731
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2992092607
- Cited by
- 199
- References
- 7
- FWCI
- 8.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.