The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Facile and green synthesis of mechanically flexible and flame-retardant clay/graphene oxide nanoribbon interconnected networks for fire safety and prevention
Abstract
Abstract Water-based hybrid graphene oxide nanoribbon (GONR)/montmorillonite (MMT)/polyethylene glycol (PEG) networks were prepared by using a facile bio-inspired low-temperature evaporation induced assembling process. Multiple non-covalent and covalent interactions together with a high orientation level of MMT were constructed in the hybrid PEG/MMT/GONR networks. As a result, the hybrid networks exhibit synergistic reinforcing and toughening efficiencies when compared with the composites modified with the single-phase filler, e.g. 152% and 167% increase in tensile strength for the optimized ternary composites in comparison with those of the binary composites. Moreover, the nacre-like hybrid networks show excellent flame resistance and structural stability in a flame due to the formation of interconnected and compact char after combustion, which can be applied as protective coatings to combustible materials. The hybrid coatings not only improve the flame-retardant property (e.g. ~46% decrease in heat release rate at 30 wt%) of the combustible PU foam materials significantly, but also provide ideal fire alarm responses (e.g. rapid flame detection of ~2 s and effective fire early warning signals in pre-combustion). Owing to the green and versatile synthesis scheme, excellent mechanical performance and flame resistance, these hybrid PEG/MMT/GONR networks are promising widespread application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Origin of flaw-tolerance in nacre
Huang, Z., & Li, X. (2013) · Scientific Reports · doi:10.1038/srep01693 · Cited by 111
Cited by
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Li, S.-N., Yu, Z.-R., Guo, B.-F., Guo, K.-Y., Li, Y., Gong, L.-X., Zhao, L., Bae, J., & Tang, L.-C. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106502 · Cited by 341
Self-citationHe, H., Liu, J., Wang, Y., Zhao, Y., Qin, Y., Zhu, Z., Yu, Z., & Wang, J. (2022) · ACS Nano · doi:10.1021/acsnano.1c10144 · Cited by 282
Self-citationMao, M., Yu, K.-X., Cao, C.-F., Gong, L.-X., Zhang, G.-D., Zhao, L., Song, P., Gao, J.-F., & Tang, L.-C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131615 · Cited by 276
Self-citationZhu, Y., Zhu, J., Li, Y., Chen, J., Rojas, O., & Jiang, F. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c04108 · Cited by 35
Metadata
- Authors
- Yu, Z.-R., Mao, M., Li, S.-N., Xia, Q.-Q., Cao, C.-F., Zhao, L., Zhang, G.-D., Zheng, Z.-J., Gao, J.-F., & Tang, L.-C.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 405
- Pages
- 126620
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3048610735
- Cited by
- 189
- References
- 2
- FWCI
- 10.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile and green synthesis of mechanically flexible and flame-retardant clay/graphene oxide nanoribbon interconnected networks for fire safety and prevention. https://app.cochat.ai/papers/10.1016/j.cej.2020.126620
- The paper
- Yu, Z.-R., Mao, M., Li, S.-N., Xia, Q.-Q., Cao, C.-F., Zhao, L., Zhang, G.-D., Zheng, Z.-J., Gao, J.-F., & Tang, L.-C. (2021). Facile and green synthesis of mechanically flexible and flame-retardant clay/graphene oxide nanoribbon interconnected networks for fire safety and prevention. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.126620
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.