Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production
The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
The soaring use of plastics has resulted in alarming issues such as environmental pollution and unsustainable production of plastics. Pyrolysis of plastic wastes has emerged as a promising chemical recycling method, to recover energy and materials from this resource. In this study, the pyrolysis of plastic wastes was conducted in a novel, continuous, microwave-assisted pyrolysis (CMAP) system for fuel production; the effects of temperature, plastic composition, and catalysis on the product yields and composition were investigated. Higher pyrolysis temperatures promoted the cracking of wax and production of lighter and more stable hydrocarbons. Talc as a plastic filler in polypropylene showed a high cracking activity. Incorporating ZSM-5 catalysts at a weight hourly space velocity of 10 h−1 and a pyrolysis temperature of 620 °C resulted in a liquid yield of 48.9%, and this product consisted of 73.5% gasoline-range hydrocarbons rich in aromatic (45.0%) and isomerized aliphatic (24.6%) contents. The catalyst rapidly lost its activity at a feedstock/catalyst ratio of 5. Energy balance analysis showed that 5 MJ of electrical energy was required to process 1 kg of HDPE with the CMAP system, giving an energy efficiency as high as 89.6% 6.1 MJ electrical energy could be generated from the gas products alone, making the process energy self-sufficient. Overall, the CMAP system, featuring a combination of microwave heating with a SiC mixing-ball-bed, is a promising design for industrial application of energy recovery from plastic wastes due to its advantages, including: 1) higher energy efficiency, and 2) lower processing temperature than conventional fluidized-bed reactors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Zhang, F., Zeng, M., Yappert, R. D., Sun, J., Lee, Y.-H., LaPointe, A. M., Peters, B., Abu-Omar, M. M., & Scott, S. L. (2020) · Science · doi:10.1126/science.abc5441 · Cited by 882
Catalytic cracking of hydrocarbons over modified ZSM-5 zeolites to produce light olefins: A review
Rahimi, N., & Karimzadeh, R. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.03.009 · Cited by 836
Peterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Plastics recycling with a difference
Sardon, H., & Dove, A. P. (2018) · Science · doi:10.1126/science.aat4997 · Cited by 512
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
Ratnasari, D. K., Nahil, M. A., & Williams, P. T. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.12.027 · Cited by 355
A review on microwave assisted pyrolysis of coal and biomass for fuel production
Mushtaq, F., Mat, R., & Ani, F. N. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.073 · Cited by 351
Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346
Upcycling waste plastics into carbon nanomaterials: A review
Zhuo, C., & Levendis, Y. A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39931 · Cited by 327
Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Self-citationZhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
Self-citationPilot-Scale Pyrolysis of Scrap Tires in a Continuous Rotary Kiln Reactor
Li, S.-Q., Yao, Q., Chi, Y., Yan, J.-H., & Cen, K.-F. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030115m · Cited by 283
TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS
Wu, J., Chen, T., Luo, X., Han, D., Wang, Z., & Wu, J. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.005 · Cited by 277
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Stefanidis, S. D., Karakoulia, S. A., Kalogiannis, K. G., Iliopoulou, E. F., Delimitis, A., Yiannoulakis, H., Zampetakis, T., Lappas, A. A., & Triantafyllidis, K. S. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.05.031 · Cited by 271
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals
Zhao, D., Wang, X., Miller, J. B., & Huber, G. W. (2020) · ChemSusChem · doi:10.1002/cssc.201903434 · Cited by 259
Elordi, G., Olazar, M., Lopez, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200186m · Cited by 224
Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes
López, A., de Marco, I., Caballero, B. M., Adrados, A., & Laresgoiti, M. F. (2011) · Waste Management · doi:10.1016/j.wasman.2011.04.004 · Cited by 192
Efficient disposal of waste polyolefins through microwave assisted pyrolysis
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 182
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Zhang, Y., Ji, G., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106455 · Cited by 171
Ueno, T., Nakashima, E., & Takeda, K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.020 · Cited by 162
Basic study on a continuous flow reactor for thermal degradation of polymers
Murata, K., Hirano, Y., Sakata, Y., & Uddin, M. A. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00181-4 · Cited by 160
Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor
Kim, S.-S., & Kim, S. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00184-0 · Cited by 142
Exergy and energy analysis of pyrolysis of plastic wastes in rotary kiln with heat carrier
Zhang, Y., Ji, G., Ma, D., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.06.021 · Cited by 142
Wan Mahari, W. A., Chong, C. T., Lam, W. H., Anuar, T. N. S. T., Ma, N. L., Ibrahim, M. D., & Lam, S. S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.073 · Cited by 141
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137
Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor
Milne, B. J., Behie, L. A., & Berruti, F. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00014-5 · Cited by 137
Syngas production from biomass pyrolysis in a continuous microwave assisted pyrolysis system
Zhou, N., Zhou, J., Dai, L., Guo, F., Wang, Y., Li, H., Deng, W., Lei, H., Chen, P. L., Liu, Y., et al. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123756 · Cited by 131
Self-citationEvaluation of the properties of tyre pyrolysis oils obtained in a conical spouted bed reactor
Álvarez, J., López, G., Amutio, M., Mkhize, N. M., Danon, B., van der Gryp, P., Görgens, J. F., Bilbao, J., & Olazar, M. (2017) · Energy · doi:10.1016/j.energy.2017.03.163 · Cited by 126
Serrano, D. P., Aguado, J., Escola, J. M., & Garagorri, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00153-4 · Cited by 121
Mullen, C. A., Dorado, C., & Boateng, A. A. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.012 · Cited by 117
Kassargy, C., Awad, S., Burnens, G., Kahine, K., & Tazerout, M. L. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.113 · Cited by 114
Study of the effects of regeneration of USY zeolite on the catalytic cracking of polyethylene
Kassargy, C., Awad, S., Burnens, G., Upreti, G., Kahine, K., & Tazerout, M. L. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.093 · Cited by 100
Defluidization phenomena during the pyrolysis of two plastic wastes
Arena, U., & Mastellone, M. L. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00533-3 · Cited by 91
An experimental study on thermo-catalytic pyrolysis of plastic waste using a continuous pyrolyser
Auxilio, A. R., Choo, W. L., Kohli, I., Srivatsa, S. C., & Bhattacharya, S. (2017) · Waste Management · doi:10.1016/j.wasman.2017.05.011 · Cited by 82
Silicon carbide foam supported ZSM-5 composite catalyst for microwave-assisted pyrolysis of biomass
Zhou, N., Liu, S., Zhang, Y., Fan, L., Cheng, Y., Wang, Y., Liu, Y., Chen, P. L., & Ruan, R. R. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.07.007 · Cited by 76
Self-citationDai, L., Zhou, N., Li, H., Wang, Y., Liu, Y., Cobb, K., Cheng, Y., Lei, H., Chen, P. L., & Ruan, R. R. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.144995 · Cited by 73
Self-citationPyrolysis of Waste Plastics into Fuels
Gao, F. (2010) · UC Research Repository (University of Canterbury) · doi:10.26021/3251 · Cited by 64
Optimization of gasoline hydrocarbon compositions for reducing exhaust emissions
Shen, Y., Shuai, S., Wang, J., & Xiao, J. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)62405-5 · Cited by 39
Pyrolysis of Plastic Waste and Scrap Tires Using a Fluidized-Bed Process
KAMINSKY, W., & SINN, H. (1980) · ACS Symposium Series · doi:10.1021/bk-1980-0130.ch031 · Cited by 37
Jing, X., Yan, G., Zhao, Y., Wen, H., & Xu, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.07.003 · Cited by 31
Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China
Xingzhong, Y. (2006) · doi:10.1002/0470021543.ch28 · Cited by 24
Selective Dechlorination of Polyvinyl Chloride by Microwave Irradiation
Kobayashi, J., Hori, M., Kobayashi, N., Itaya, Y., Hatano, S., & Mori, S. (2019) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.18we219 · Cited by 20
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Self-citationA review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Self-citationPyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Self-citationPlastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Dong, Z., Chen, W., Xu, K., Liu, Y., Wu, J., & Zhang, F. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c04915 · Cited by 269
Metadata
- Authors
- Zhou, N., Dai, L., Lv, Y., Li, H., Deng, W., Guo, F., Chen, P., Lei, H., & Ruan, R.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 418
- Pages
- 129412
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3138246647
- Cited by
- 309
- References
- 54
- FWCI
- 14.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.